How much power should the ant L3 miner bring

1. There may be a problem. I can't say exactly what the problem is. You can go to the official and ask. The technical staff will let you know. It's not a problem. It may be low voltage or poor heat dissipation. Ant S3 mining machine is now in the phase out period, ant S5 has come out. Now mining relies on low electricity price and low energy consumption of mining machinery. Mining is not particularly profitable now.

2. The amount of power consumption is mainly related to the total input power and operation time of your machine. For example, the total input power of your machine is 1000W, and it starts for 10 hours every day. The calculation is: 1kW * 10h = 10kW, which means 10 degrees.

3. Rated 1800W eth mining machine power supply 24 pin / 6 pin, with 8 independent graphics cards, high power supply

4. 1. Look at that era. For example, the I3 of the 6th generation has only 51w
2. Only by looking at the overall configuration can we have a reliable estimation.

5. If you don't upgrade the independent graphics card and other hardware in the later stage, it's OK. Ryzen5 3400g four core eight wire, the actual full load power consumption is about 80W, plus the motherboard memory mole, solid-state disk fan and so on, 70W, the total power consumption is less than 150W, so the power supply doesn't need to be replaced, If you really need to upgrade later, it's not too late to replace the power supply,

6. The actual power of your configuration should be about 150W, which can be said that almost any 300W power supply can bring
nx350 is recommended, which is very quiet, high conversion efficiency, low price and excellent quality
if you want to upgrade a high-end graphics card in the future, it is recommended to consider a power supply rated at 450W or above.

7. 400W rated power supply. The most practical brand is Antaike Antec. 3470 77W, 660 150W,
theoretically 300W rating is enough. Other 50W are not used, if you are not hanging 10 8 hard disk, CD-ROM or something, should be within 30W. But with the passage of time, the power supply must be aging and the output is less, so it's better to make it a little bigger
but the 3470 doesn't have the problem of overclocking. When it's big enough, I just want to buy a 660 crossfire. So 500W seems a little smaller.

8. For this configuration, it is recommended to choose a well-known brand of normal power supply with a rated power of 400W or above. The power consumption of gtx760 is not low.

9.

Reasonable, 500W is enough. Your full power should be around 300W. However, if you buy a large power supply, you don't buy a small one. Half of the power is twice the actual power consumption. The power of these power supplies can be used up to 50-60%, which saves electricity and has a high conversion rate. Moreover, it's not easy to burn the power supply and increases the service life of shop assistants. The 750W configuration I used is as follows