Taikuang shearer 500
Publish: 2021-04-23 05:17:36
1. Executive standard: Q / JM 0201021-2010; MT/T81-1998; MT / t82-1998 Manual of Jixi Coal mining Machinery Co., Ltd. in May 2010
MG200 / 530 – WD MG250 / 630 – WD AC haulage shearer MG300 / 730 – WD MG300 / 730 – wd1
MG200 / 530 – WD MG250 / 630 – WD AC haulage shearer MG300 / 730 – WD MG300 / 730 – wd1
2. Electrical part or mechanical part?
3. If the shearer can't be adjusted up or down, it must be caused by its lack of pressure or hydraulic pipe line.
4. In shearer model: MG150 / 375 meaning: Mg means drum shearer, 150 means cutting motor power is 150KW, 375 means total installed power is 375kw< Sgz630 / 320 flexable scraper conveyor model: s-conveyor, g-scraper, z-medium double chain, 630 middle groove width 630mm, 320 installed power 320kw< Model of szd630 / 75 bridge type transfer machine: s-conveyor, Z-transfer machine, d-medium single chain, 630 middle slot width 630mm, 75 installed power 75kW.
5. There are many models of double drum shearer, such as AM500, 6mg200-w and MLS_ 3-170
the characteristics of double drum shearer are: mining the whole height at one time, there is a drum at both ends of the shearer. The front drum cuts the top coal on the top and the rear drum cuts the bottom coal on the bottom. The two rollers generally rotate in opposite directions. The roller on the driver's left side uses the left screw, and the roller on the driver's right side uses the right screw. It can also rotate in opposite directions. The roller on the driver's left side uses the right screw, and the roller on the driver's right side uses the left screw. Generally, it adopts the way of two-way coal mining and the advanced cutter moves the machine head backward; It can also adopt the tangent feed mode of moving the machine head at the same time.
the characteristics of double drum shearer are: mining the whole height at one time, there is a drum at both ends of the shearer. The front drum cuts the top coal on the top and the rear drum cuts the bottom coal on the bottom. The two rollers generally rotate in opposite directions. The roller on the driver's left side uses the left screw, and the roller on the driver's right side uses the right screw. It can also rotate in opposite directions. The roller on the driver's left side uses the right screw, and the roller on the driver's right side uses the left screw. Generally, it adopts the way of two-way coal mining and the advanced cutter moves the machine head backward; It can also adopt the tangent feed mode of moving the machine head at the same time.
6. Cutting motor 2x200kw, total installed power 500kW (oil pump 20kW, traction 2x40kw?), Q represents that the traction inverter is a four quadrant, which can realize electric energy feedback and ensure good large slope operation.
7. If the power of the walking motor is the same, it also depends on their assembly size, and the distribution voltage is estimated to be the same
8. M-shearer g-drum type 500 cutting drum power 1180 total installed power WD chainless electric traction
9. Hello
SL500 is the shearer of aikefu, Germany,
1280kw refers to the total installed power
just for personal point of view, don't spray if you don't like it, thank you.
SL500 is the shearer of aikefu, Germany,
1280kw refers to the total installed power
just for personal point of view, don't spray if you don't like it, thank you.
Hot content