How to monitor miner on mobile phone

1.

In order to connect the monitor with mobile phone, the following two conditions must be met first:

1. The monitor is normally connected and can display video

Haikang video recorder can access the Internet

the specific steps are as follows:

1. Download and install the mobile app "fluorite cloud video"

9. After the above steps are completed, you can use your mobile phone to watch the monitoring

extended data:

remote monitoring website settings of Hikvision:

1. First of all, there should be a router in the network

(1) correct network configuration needs to be established:
the default IP address of router is 192.168.1.1, and the default subnet mask is 255.255.255.0

(2) configure the IP address of the computer and the IP address of the hard disk video recorder. Just stay in the same network segment as the router

2. The IP address setting of the hard disk video recorder here will be slightly different according to different brands of hard disk video recorder, but as long as the address is configured correctly

Then start to configure the router and use the built-in DHCP server to set the IP address automatically

(1) set the TCP / IP protocol of the computer to "automatically obtain IP address"

(2) turn off the router and computer. First open the router, and then start the computer, so that the built-in DHCP server in the router will automatically set the IP address for the computer

(3) fill in 192.168.1.108 for the address of the hard disk video recorder (for example, 108 here). As long as you connect with the router and install the software on the client's PC, you can access it in the LAN

3. In the LAN, write 192.168.1.108 as the address
and then click the user name, password and connect

2. Home opened a broadband, the camera connected to the Internet power line, do not do any settings, in the mobile phone installed app client, enter the camera ID number, you can use the mobile phone monitoring
spend 500 or 600 yuan to buy a cloud connected network camera with cloud server support. Because the manufacturer provides a cloud platform to support the point-to-point connection between the mobile computer and other clients and the camera, the installation and use of this camera are very simple, and you can do it yourself without professional support -
as long as you have broadband at home, Connect the camera to the power line of the Internet cable without any settings. Input the ID number of the camera on the app client installed on the mobile phone, and you can use the mobile phone to monitor. It's the same with the computer. Start the client program, input the ID number of the camera, and you can watch it

no additional hardware is needed
but you need to do some network settings, as long as you install a Dahua client on your mobile phone You need to fill in your domain name and port number
the VCR is connected to your home switch or router with a network cable. Set the IP address, gateway port number, etc
to apply for a DDNS dynamic domain name resolution (available) www.3322.org This is free) the video recorder can directly enable the DDNS function, Dahua supports 3322
enable the router port mapping function. Or directly use the DMZ host to specify the IP address of the video recorder
if you have some experience in network setup, I believe you already understand
if you can't understand it, you can't help it. Pay for it and find someone to set it for you. The specific setting method is what I wrote< br />
  Mobile client can be installed, such as telecom global eye, many monitoring software have mobile version, I don't know what kind of monitoring system you use

remote connection of home network camera through "mobile phone" steps:
Step 1: Download and install the corresponding cloud vision mobile network remote monitoring system client of mobile system
Step 2: log in to the main interface of the mobile phone monitoring system, click the "add device" icon, and enter the cloud vision number of the home network camera, as shown in the figure below:
Step 3: click the "save" button to open the "device list" interface and display the device name, As shown in the figure below:
note: if the network user name and password of the connected home webcam device are changed, click the "advanced" button in the add device interface, enter the changed user name and password, and click the "save" button to open the "device list" interface
Step 4: touch the device name in the above figure, and then touch the unique channel icon of the device to display the video surveillance image that has been successfully connected

3. First of all, install monitoring app on the mobile phone, and then connect to the network, so that you can view it anytime and anywhere.

4. How to watch monitoring with mobile phone? How to watch monitoring with mobile phone? Just like Bluetooth, you can connect the mobile phone with the monitor. After you turn on Bluetooth, you can see the content in the monitor. It needs to be connected to the mobile phone. If you can't connect the monitor, you can't see it. You must connect the mobile phone with the monitor to see the mobile phone and the monitor

5. A: the home monitoring system supports web access, and the mobile phone can access the web of the monitoring system to watch the monitoring on the mobile phone

1: introction

the monitor is a monitoring software with outstanding round hole performance, which can realize remote monitoring thousands of miles away only by inputting the IP and control password of the other party. The software uses UDP protocol to penetrate the intranet. Without port mapping, users can connect to remote computers in any computer that can access the Internet for remote office and remote management. With the increasing popularity of monitoring system in commercial and civil, surveillance cameras are widely used in various fields to protect social security. Video surveillance cameras are widely used in residential buildings, villas, shopping malls, shops and financial rooms. The monitor is composed of pan tilt, bracket, shield, monitor and video amplifier

2: monitor

monitor is the standard output of the monitoring system, with which we can watch the images sent by the front end. Monitors are divided into color and black and white, with sizes of 9, 10, 12, 14, 15, 17, 21 inches, etc., and 14 inches are commonly used. The monitor also has resolution, which is expressed by the number of lines as the camera. In actual use, it is generally required that the number of lines of the monitor match the camera. In addition, some monitors also have audio input, S-Video input, RGB component input, etc. in addition to the audio input monitoring system, most of the other functions are used for image processing

3: video amplifier

when the video transmission distance is relatively long, it is better to use the video line with larger diameter, and increase the video amplifier in the line to enhance the signal strength, so as to achieve the purpose of long-distance transmission. Video amplifier can enhance the brightness, chroma and synchronization signal of video, but the interference signal in the circuit will also be amplified. In addition, too many video amplifiers should not be connected in series in the circuit, otherwise the saturation phenomenon will appear, leading to image distortion

4: protective cover

protective cover is one of the most commonly used devices in the monitoring system, which is mainly divided into indoor and outdoor. The main differences of indoor protective cover are volume, appearance and surface treatment. The main function is to prevent st and damage. The sealing performance of the outdoor protective cover must be good, so as to ensure that the rainwater can not enter the inside of the protective cover and corrode the camera. When the weather is too hot, the exhaust fan works automatically; The heating plate works automatically when it is too cold; When there is rain on the glass of the protective cover, the wiper can be started through the control system

6.

Monitoring in the company, if you want to see it on your mobile phone, you need to download and open the easv cloud app. Select "cloud ID" and enter the monitoring device ID to view the monitoring remotely

1. Download and open the E-vision cloud app, and the following interface is shown. You can register your account or not, and click "experience" if you don't register

precautions:

1. In the design of the installation scheme of the monitoring system, because the traditional cameras only have a view angle of no more than 90 degrees, each traditional camera always has a dead angle of observation. If you need to observe a panoramic range, you need to supplement and coordinate multiple cameras

The installation of external cameras should pay special attention to the waterproof, lightning protection and grounding work

7. Hello, mobile video monitoring is a typical application in the era of mobile Internet. It mainly refers to that one end of the monitoring system has risen from PC in the past to mobile client. With mobile phones, we can monitor the front-end webcam anytime and anywhere. Since then, mankind has realized the dream of thousands of miles
there are two ways to watch surveillance videos on mobile phones:
1. Watch videos on your mobile phone means that you can use your mobile phone to play these videos (call them) when you need to start the video recording function and have corresponding image records in the process of monitoring with your mobile phone. For example, the mobile client of quirk has this function
2. Remote viewing refers to using mobile phone to remotely call the video stored on the network camera.

8. I'll give you a sign: Yier Yiling mountain, Lingshan try Wu

9. First of all, you need a webcam, and connect the webcam to the network through wired or wireless connection. This needs to be set through the computer
secondly, you need a smart phone that can access the Internet, install remote monitoring software on the phone, and input the ID information and password of the camera on the software
when both the mobile phone and the camera side can access the Internet normally, the mobile phone can access the camera remotely and see the real-time video of the camera.