How many mining machines can be connected by one broadband

1. The decision depends on the speed of your broadband, but when you use it, if one person downloads something, other people will not be able to open the Internet
200m recommends 2-4 extensions or more
I have 4 extensions for 60m. The speed is really slow. See how many interfaces you have in Hubble. As long as you are not afraid of slow speed, just a few

2. Unknown_Error

3. One...
connect the broadband to the router, and then the router allocates multiple ports

if the puzzle has been solved, please click the satisfaction in the upper right corner, thank you

4. In a normal network topology, an external line only needs to be connected to a router, and all the remaining points in the LAN only need to be connected to a switch. There is no need to connect multiple routers. If the router is connected too much, the setting problem will lead to LAN failure.

5. According to the bandwidth,,,,, if Telecom 8m, if two computers play online games or watch movies at the same time, then what's the use of connecting more wireless routers? It will be very slow
if you don't play games, just watch web pages and listen to music, then connecting 10 computers should be able to use at the same time, or you can connect more wireless routes.

6. If a router is used, it can support up to 255 computers or mobile phones without conflict. If two routers are cascaded, 254 + 255 computers or mobile phones can be supported. If you use more than one router, you can connect it according to this.

7. It depends on how much bandwidth you have. A 50 megabyte band with three should be almost the same

8. You can connect multiple computers
but the bandwidth is only at normal speed
the more people who use the same broadband at the same time
the slower the network speed is
you only need to buy a router to share a broadband with multiple computers
you can search for information about routers
below

9.

A network cable can connect two routes. There are two ways to bridge a router through router bridging:

1. Wired bridging: connect the network cable to the main router first, and then use another network cable, one end of which is connected to the LAN port of the main router, the other end is connected to the WAN port of the secondary router. After connecting, log in to 192.168.1.1 to debug and surf the Internet

2. Wireless bridge: first connect the network cable to the main router, then turn on the WDS function of the sub router, search the SSID of the main router, and then enter the password of the main router. The name of the transmitted signal of the sub router can be the same as or different from the main router

extended materials:

router usage classification:

1. Access router: access router connects home or small enterprise customers in ISP

2. Enterprise Router: enterprise or campus router connects many terminal systems, and its main goal is to realize as many endpoint interconnection as possible in a cheap way, And further requirements to support different quality of service

Backbone router: backbone router realizes the interconnection of enterprise network. The demand for it is speed and reliability, while the cost is in the secondary position

4. Multi WAN router: al WAN router has two physical Wan ports as external network access, so that the internal network computer can use two external network access lines through the load balancing function of al WAN router, which greatly improves the network bandwidth

5. 3G wireless router: 3G wireless router adopts 32-bit high-performance instrial ARM9 communication processor, takes embedded real-time operating system RTOS as software support platform, and integrates a full range of communication protocols from logical link layer to application layer

10. Obviously not...
buy a router with more holes!