Position: Home page » Pool » How much should the temperature of L3 miner not exceed

How much should the temperature of L3 miner not exceed

Publish: 2021-04-28 15:05:59
1. It's a question whether the temperature you said is accurate or not. The highest temperature of such a motor is 80 degrees, which means the wire package. If you said the temperature is accurate, it can work and has little effect on the service life. You can create heat dissipation conditions for the motor. There are less things and sundries around the motor. The surface temperature of the motor is 55 degrees, which is no problem
2. Generally, when you don't play games, the CPU is below 40 degrees, the graphics card is below 40 degrees, the hard disk is about 30 degrees, and the motherboard is about 30 degrees. The fan speed varies from indivial to indivial. If it is a large 3D game, the CPU and graphics card can reach 70 degrees or even higher, and the hard disk is above or below 50 degrees. If the hard disk exceeds 80 degrees, there will be the risk of data loss and hard disk damage
to cool down quickly, you need an electric fan to open the cover of the chassis and blow directly. The temperature will have an immediate effect, but it's not a long-term solution.
if you want to get rid of it once and for all, you'd better not believe that the so-called cooling software is nothing more than frequency rection, but frequency rection means that playing games will get stuck. This is a hard injury, which needs to be solved by hardware, At most, you can install a temperature and fan speed monitoring software such as game software.

1: heat pipe radiator should be used as far as possible, and side blowing can blow most of the heat to the rear exhaust outlet.
2: silicone grease (thermal conctivity) with higher heat dissipation index should be used, which is one of the reference indexes. About 9 is more economical and applicable
3: add the air ct fan in the case, and Ma Yun's 30 or so pieces will do. Strengthening the convection effect can quickly and effectively eliminate the hot air and avoid the heat island effect
4: check your CPU thermal power consumption (TDP) online and buy the corresponding or higher radiator
3. 1. Generally, the temperature of graphics card should not exceed 90 ℃
2. The graphics card is the hardware with the largest heat and the highest temperature in the whole chassis. Generally, the normal temperature of the graphics card is about 30 ℃ - 80 ℃. Due to the influence of external factors, it may be higher in summer, about 50-85 ℃. For people who like to play large-scale 3D online games or watch high-definition movies, The temperature of the computer can reach 95-100 degrees (the heat-resistant temperature of the graphics card of the notebook can reach 120 degrees); But generally speaking, the temperature of the graphics card is higher than 90 degrees, which is abnormal.
4. The best is the CPU 100% operation.. the temperature should be controlled within 70 degrees!!
5.

Temperature rise refers to the value when the temperature of the stator winding is higher than the ambient temperature (the ambient temperature is specified as 35 ℃ or below 40 ℃. If the specific value is not indicated on the nameplate, the temperature rise of the stator winding is higher than the ambient temperature when the motor is in rated operation, It is 40 ℃)

insulation temperature class a class E class B class F class H

maximum allowable temperature (℃) 105 120 130 155 180

winding temperature rise limit (k) 60 75 80 100 125

performance reference temperature (℃) 80 95 100 120 145

in electrical equipment such as generator, insulation material is the weakest link. Insulating materials are especially vulnerable to accelerated aging and damage e to high temperature. Different insulation materials have different heat resistance, and the electrical equipment with different insulation materials have different high temperature resistance. Therefore, the general electrical equipment are required to work at the highest temperature

6.
  1. generally, the CPU can work at 25-75 degrees, 40-50 degrees in idle time,
    50-65 degrees in busy time, and 65-78 degrees in full speed. If it is too high, it will restart or crash

    the maximum allowable temperature of the graphics card is 90 degrees. If the temperature of the graphics card is too high, it will cause the computer to turn off or restart. Serious damage to the graphics chip GPU. So the graphics card is useless

  2. what software is used to detect the temperature of the graphics card

  3. the temperature of the graphics card often exceeds 90 degrees, and GPU overheating will cause damage to the hardware of the graphics card. It is necessary to confirm whether the detected temperature is accurate

7. 1. The motor shell is a high-speed pump driven by AC motor in explosion-proof situation. If the motor is driven by 2-pole motor, if the motor exceeds 2890, the temperature is controlled below 80 ℃ in summer because the motor runs in dangerous and explosive situation, so the inspector needs half an hour to measure the surface temperature of the motor. The maximum temperature is 8590 ℃, Over must be stopped (considering insulated coil). The temperature of motor side bearing is as high as 80 ℃ in summer, and the maximum temperature of bearing grease, such as molybdenum disulfide lithium grease, is 85 ℃. When molybdenum disulfide grease is used, the maximum temperature is 75 ℃. As the high temperature molybdenum disulfide grease is liquid, the bearing that loses lubricating oil will lead to a disaster in 10 minutes
2. For non explosion proof AC motor, 4-pole grounding and 6-pole motor, because the motor speed is very low, as long as the foundation carries gas, the temperature is maintained at 70 ℃ and the bearing temperature is over 80 ℃ (if it is more than 4), it is e to the lack of oil. Measuring tool: infrared hand-held thermometer measuring part: motor (near the motor bearing ring surface maximum temperature) (side bearing cover surface) 3, DC motor e to DC motor cooling fan, so in 50 ℃ temperature control, summer maximum 60-65 ℃.
8. The 101st regulation of coal mine safety regulations stipulates that the maximum allowable wind speed of the coal face should not exceed 4m/s, and the maximum wind speed of the comprehensive mechanized coal mining face can exceed the 4m/s value after taking the measures of coal seam water injection and shearer spray and st suppression, but it must not exceed 54m/s.
9. Flash point of gas
10. Don't exceed 40 degrees
Hot content
Inn digger Publish: 2021-05-29 20:04:36 Views: 341
Purchase of virtual currency in trust contract dispute Publish: 2021-05-29 20:04:33 Views: 942
Blockchain trust machine Publish: 2021-05-29 20:04:26 Views: 720
Brief introduction of ant mine Publish: 2021-05-29 20:04:25 Views: 848
Will digital currency open in November Publish: 2021-05-29 19:56:16 Views: 861
Global digital currency asset exchange Publish: 2021-05-29 19:54:29 Views: 603
Mining chip machine S11 Publish: 2021-05-29 19:54:26 Views: 945
Ethereum algorithm Sha3 Publish: 2021-05-29 19:52:40 Views: 643
Talking about blockchain is not reliable Publish: 2021-05-29 19:52:26 Views: 754
Mining machine node query Publish: 2021-05-29 19:36:37 Views: 750