Miner's graphics card overclocking tool

2. Video card overclocking software is a Chinese translation, you can contact the manufacturer's 400 technical support customer service to confirm the scope of each option; At present, graphics card overclocking is about 3-5% of the original frequency to try, stable screen can be.

3. Rivatunner is a special overclocking software for n card. Now it can also be used for a card. Overclocking is very safe. Even if the overclocking fails, the default frequency will be restored. Overclocking steps can be seen here http://www.360buy.com/evaluating.aspx?type=1&wid=127798&page=5 Open rivatunner, find the driver settings, there is a rectangular box below, find the small square on the far right of the box, open it, some patterns will come out, select the graphics card pattern on the far left, open it, you will see the English with enable Drever level, There is a small box on the left side of this line of English. If you select it, there will be three options: 1, reboot 2, detect now 3, cancel. The first time you use rivatunner, you will select the first one, restart it, and then press the steps just now to select these three items again. Then this time, you will select the second one, and the frequency that you can pull will jump to the pole. There are three lines, The first line is the core frequency, the second line is the frequency of the stream processor, and the third line is the frequency of the video memory. Generally, the performance improvement of the over frequency core is obvious. You can pull that to adjust the frequency. If you want to adjust the frequency, don't increase it too much. You need to increase it bit by bit. First, make a small selection and then confirm it. Then, run a large game for some time. If there is no slight splash or crash, increase the frequency again. When you know that there is a slight splash, you will know the limit frequency. Then, adjust it downward until you find the most suitable frequency. This software belongs to soft overclocking, and the frequency will return to the default frequency after restart, so even if it fails and crashes, it will be good to restart. Note that the frequency should be added slowly, not too much at a time. The core frequency is adapted to the power supply, workmanship and factors of the graphics card. Therefore, the "system" of each graphics card is different. Generally, it can exceed 10%. After overclocking, the temperature of the graphics card will increase slightly. After overclocking is successful, it should be applied for a period of time. If there is no problem in playing large-scale games for a long time, then the overclocking is successful, If you adjust the frequency again next time, remember the frequency this time, and it won't be so troublesome to adjust it directly. My card is over 27%. It's been used for 3 months and there's no problem. There is also a way to modify the BIOS, which is a big risk. I will not talk about it. If the BIOS is damaged after modification, it will not be guaranteed.

4. It's better not to overclocking. Why overclocking? The manufacturer has already adjusted it before leaving the factory. If it is forced to overclocking, the GPU will be damaged too much after a long time, and the calorific value will be large. I used to overclock the CPU on the motherboard, which is very cool. But after a long time, the capacitor on the motherboard is burned. This is not serious. If the motherboard is burned, the gain is not worth the loss. If you really like high frequency, buy a new high frequency graphics card.

6. Search "magic disk"
Magic disk is the official overclocking software of NVIDIA (Chinese name of N card)
it's very simple and easy to use, but overclocking will generate more heat, which also means that it will shorten the life of the graphics card
it's better to return to the default notebook when you don't play games. Overclocking must be equipped with a cooling base

7. First, download the Chinese version of rivatunner-v2.24h
and then select setting-language-chinese-s, and then Chinese
click the custom block next to the driver settings to enter the overclocking option.... The rest is up to you
I think the core can be at least 750. If the link clock is checked, the shaders will automatically overclock, and the video memory will be at least 1600. If not, 1400 will be the lowest

8. MSI afterburner is the most common overclocking software, which can surpass any graphics card model. It also cooperates with Riva Turner to display temperature, frequency and OSD. The same for their own MSI graphics card support perfect
ASUS also has its own GPU tweak, which supports ASUS card better. Others have poor support
another is shadow magic disk. The same as ASUS
in addition, amd graphics card can be set in catalyst, crimson or radar settings (depending on the driver version), game global settings global overdrive.

9. Amd CCC in the overclocking settings can be directly pulled to the highest, no problem. Its preset overclocking range is safe. Unless you want to exceed the factory preset value, it depends on the power supply and heat dissipation of your graphics card, because it needs to be very high and pressurized
hope to adopt

10. It's better to use the overclocking software of AMD or NVIDIA if it's a miscellaneous card without supporting software