How to mine M01
1. The instruction content is different
M00 is the program unconditional pause instruction. When the program is executed, the feed stops and the spindle stops. M01 program selective pause instruction
2, different command functions
M00 program stop. After completing the other commands of the program segment in which the command is located, it is used to stop the spindle, coolant, and feed. Press the cycle start button to continue to execute the subsequent program segment
M01 plan stop is similar to degree stop, but it is only effective when there is a plan stop button on the machine tool operation panel and it is pressed before the program is executed
M00 is an unconditional program pause instruction. When the program is executed, the feed stops and the spindle stops. After M00, the NC system stops reading the next section for manual operation. Press the "cycle start button" on the control panel again, and then continue to execute the following program segments. It is often used in measuring workpiece and removing chip
M01 program selectively pauses command return. Similar to the execution of M00, the difference is that the command is valid only when the "select Stop" button on the machine operation panel is pressed. After M01, the effect after execution is the same as that of M00. If the "select Stop" button on the operation panel of the machine tool is not pressed, M01 will not work and the program will continue to execute the following program
extended data:
the process instructions commonly used in the program are:
1, preparation function G instruction
2, auxiliary function m instruction
3, F, s T command
part of M code function:
M00 program pause
M01 select Stop
M02 program end
M03 spindle forward
M04 spindle reverse
M05 spindle stop
M06 tool exchange
M08 cooling on
M09 cooling off
M18 spindle orientation removal
M19 spindle orientation
M22 magazine return
the graphics card must be refitted from the special mining card
CPU is foreign rubbish
the price of i9 is ten times that of this one.
don't buy a family game.
you will regret buying it
"M01", e
M01 is selective stop. When the switch on the panel is not turned on, the command will not work
M1 is a selective pause, which is executed with the pause switch on the operation panel. When the switch is turned on, read M1, and then jump over directly.
1. You need to download an app from your computer and mobile phone first
2. Connect your mobile phone to your computer with the data cable of your mobile phone, and it will automatically match your mobile phone model
3. Find root in the common tools of app and click
app is a new lightweight icon design for mobile phone management and application software,
the new software interface makes you refreshing; There are many practical tools in its toolbox.