Storm city level 10 can learn to mine
Publish: 2021-05-05 19:53:05
1. The main city will have ~ ~ ~ ~ 300 in Outland, BL in Salma, LM seems to be called glory castle I'm BL)
375's going to Northrend, their respective bases
375's going to Northrend, their respective bases
2.
1. To learn mining skills, when you see a guard at the door of the blacksmith shop, ask
3. Hello, as long as there are trainers, no matter what race you are, you can learn from the four main cities of the league and the small towns near the main city
for the specific tracking method, you can see a small circle on the left side of the small map in the upper right corner, click it, and then select professional trainer to track it on the small map
if you can't find it in a small town, you can go to the main city, right-click the guard, select professional trainer, and then select mining. Then press m to open the map. The place where the red flag is on the map is the trainer
also, remember to buy a hoe from the supplier next to the trainer.
for the specific tracking method, you can see a small circle on the left side of the small map in the upper right corner, click it, and then select professional trainer to track it on the small map
if you can't find it in a small town, you can go to the main city, right-click the guard, select professional trainer, and then select mining. Then press m to open the map. The place where the red flag is on the map is the trainer
also, remember to buy a hoe from the supplier next to the trainer.
4. You can learn in the main city, master level, master level in glory castle, smelting ore (smelting black iron) in the trainer.
5. Setting:
1. Lower limit deviation alarm setting: press the set key to select "SLP", the value of the parameter is displayed on the green display screen, and the shift, increment and decrement keys are selected to set or modify the parameter. This parameter indicates the difference between the alarm point and the main control set point
2. Upper limit deviation alarm setting: press set key to select "SHP" and the value of the parameter will be displayed on the green display screen. Select shift, increment and decrement keys to set or modify the parameter. This parameter indicates the difference between the alarm point and the main control set point
3. Proportional range setting: press the set key to select "P", the green display screen displays the value of the parameter, and select the shift, increase and decrease keys to set or modify the parameter“ The higher the "P" value is, the lower the sensitivity of the main control relay output of the temperature controller is. The smaller the "P" value is, the higher the sensitivity of the main control relay output of the temperature controller is
4. Integral time setting: press the set key to select "I", the value of the parameter is displayed on the green display screen, and the shift, increment and decrement keys are selected to set or modify the parameter. The shorter the set integration time, the stronger the integration effect
5. Differential time setting: press the set key to select "d", the value of the parameter is displayed on the green display screen, and the shift, increment and decrement keys are selected to set or modify the parameter. The longer the differential time set by the instrument, the stronger the correction by differential action
6. Proportional cycle setting: press the set key to select "t", the value of the parameter is displayed on the green display screen, and the shift, increment and decrement keys are selected to set or modify the parameter
7. Self tuning setting: press set to select "a" τ”， The value of the parameter is displayed on the green display screen. Select the shift, increment and decrement keys to set or modify the parameter; Setting to "00" means that the self-tuning is off, and setting to "01" means that the self-tuning is on
8. Lock parameter setting: press the set key to select "Lok", the green display screen displays the lock status, and select the shift, increment and decrement keys to set or modify the parameter; Setting to "00" means no locking, setting to "01" means only locking parameters other than master control, and setting to "02" means all parameters are locked. After the parameter is locked, others can't modify it. If you need to modify it, unlock it, that is, set it to "00"
9. Upper limit setting of main control temperature: press set key to select "SOH" and the value of this parameter will be displayed on the green display screen. Select shift, increase and decrease keys to set or modify this parameter; This parameter indicates that the action temperature of the main control relay cannot be higher than this value, otherwise, the setting temperature of the main control relay is invalid
10. Temperature correction setting: press the set key to select "SC", the green display screen displays the value of this parameter, and select the shift, increase and decrease keys to set or modify this parameter; When the temperature controller runs for a long time and proces measurement deviation, this function can be used to correct the error. If the measured value is less than 2 ℃, the parameter can be set to 02; if the measured value is more than 2 ℃, the parameter can be set to - 2
the AI temperature controller not only has analog output, but also has analog output on the low voltage side of the solid state relay. In the normal state, there are three relay outputs, namely, normally open, normally closed and common end, to control the coil of the contactor. Many heating control circuits also have contactors. If the original main control output is silicon controlled, we want to change it into a contactor, It is impossible for the user to control the contactor only by using the upper and lower limit alarm output of the instrument
according to the temperature change of the working environment, physical deformation occurs inside the switch, resulting in some special effects. The temperature control switch of the temperature controller proces a series of automatic control elements for on-off action, which are also called temperature control switch, temperature protector and temperature controller. Or the temperature signal is sent to the temperature controller through the temperature sensor, and the temperature controller sends the switch command, so as to control the operation of the equipment to achieve the ideal temperature and energy saving effect. Its application range is very wide, such as hot water system, oven, vegetable greenhouse, incubator, ceramic kiln, etc.
1. Lower limit deviation alarm setting: press the set key to select "SLP", the value of the parameter is displayed on the green display screen, and the shift, increment and decrement keys are selected to set or modify the parameter. This parameter indicates the difference between the alarm point and the main control set point
2. Upper limit deviation alarm setting: press set key to select "SHP" and the value of the parameter will be displayed on the green display screen. Select shift, increment and decrement keys to set or modify the parameter. This parameter indicates the difference between the alarm point and the main control set point
3. Proportional range setting: press the set key to select "P", the green display screen displays the value of the parameter, and select the shift, increase and decrease keys to set or modify the parameter“ The higher the "P" value is, the lower the sensitivity of the main control relay output of the temperature controller is. The smaller the "P" value is, the higher the sensitivity of the main control relay output of the temperature controller is
4. Integral time setting: press the set key to select "I", the value of the parameter is displayed on the green display screen, and the shift, increment and decrement keys are selected to set or modify the parameter. The shorter the set integration time, the stronger the integration effect
5. Differential time setting: press the set key to select "d", the value of the parameter is displayed on the green display screen, and the shift, increment and decrement keys are selected to set or modify the parameter. The longer the differential time set by the instrument, the stronger the correction by differential action
6. Proportional cycle setting: press the set key to select "t", the value of the parameter is displayed on the green display screen, and the shift, increment and decrement keys are selected to set or modify the parameter
7. Self tuning setting: press set to select "a" τ”， The value of the parameter is displayed on the green display screen. Select the shift, increment and decrement keys to set or modify the parameter; Setting to "00" means that the self-tuning is off, and setting to "01" means that the self-tuning is on
8. Lock parameter setting: press the set key to select "Lok", the green display screen displays the lock status, and select the shift, increment and decrement keys to set or modify the parameter; Setting to "00" means no locking, setting to "01" means only locking parameters other than master control, and setting to "02" means all parameters are locked. After the parameter is locked, others can't modify it. If you need to modify it, unlock it, that is, set it to "00"
9. Upper limit setting of main control temperature: press set key to select "SOH" and the value of this parameter will be displayed on the green display screen. Select shift, increase and decrease keys to set or modify this parameter; This parameter indicates that the action temperature of the main control relay cannot be higher than this value, otherwise, the setting temperature of the main control relay is invalid
10. Temperature correction setting: press the set key to select "SC", the green display screen displays the value of this parameter, and select the shift, increase and decrease keys to set or modify this parameter; When the temperature controller runs for a long time and proces measurement deviation, this function can be used to correct the error. If the measured value is less than 2 ℃, the parameter can be set to 02; if the measured value is more than 2 ℃, the parameter can be set to - 2
the AI temperature controller not only has analog output, but also has analog output on the low voltage side of the solid state relay. In the normal state, there are three relay outputs, namely, normally open, normally closed and common end, to control the coil of the contactor. Many heating control circuits also have contactors. If the original main control output is silicon controlled, we want to change it into a contactor, It is impossible for the user to control the contactor only by using the upper and lower limit alarm output of the instrument
according to the temperature change of the working environment, physical deformation occurs inside the switch, resulting in some special effects. The temperature control switch of the temperature controller proces a series of automatic control elements for on-off action, which are also called temperature control switch, temperature protector and temperature controller. Or the temperature signal is sent to the temperature controller through the temperature sensor, and the temperature controller sends the switch command, so as to control the operation of the equipment to achieve the ideal temperature and energy saving effect. Its application range is very wide, such as hot water system, oven, vegetable greenhouse, incubator, ceramic kiln, etc.
6. There must be a big difference between the two types of things in some performance and characteristics
7. Ask the guard. This NPC needs to be searched carefully. I also searched for it for a long time
8. I don't know if I can ask the guards for first aid. In storm Cathedral, there is a female MS in the right room to teach you how to mine. On the second floor of a room in dwarf area, it's better to ask the guards
9. Ask a guard NPC. He knows everything.
10. Ask the guards of storm city. After the dialog box pops up, click professional trainer, then click mining trainer, and then press m build to open the map, which has a mark on it.
Hot content