Weimeng 220 mining
Publish: 2021-05-07 20:09:31
1. Personally, I think the effect of single line access of Weimeng router is OK, and the network effect of multi line access is not very good if it is not the same network provider, even if the strategy is adopted. After the line is connected, it can be set normally, and the load balancing can be adjusted according to the speed of the network.
2. Weimeng router has been enhanced and more stable in the ability to penetrate the wall and the practicability of modern network. It is suggested that you use 360 router, which has a great innovation in technology. The appearance of aluminum alloy is small and exquisite, with strong stability.
3.
do not connect the router to the external network cable first, only connect to the computer with the network cable, log in to the router settings page, select the network parameters, change the WAN port to the IP of the main router, for example: 192.168.1.110 255.255.255.0 192.168.1.1, change the LAN port to the same network segment as the main route, for example: 192.168.1.2 DHCP is disabled, In this way, the external line is connected to the LAN port of the second router. Another method is to change the LAN port, 192.168.2.1 (different from the main router) WAN port settings, DHCP select enable, external network cable plug WAN port. For reference http://wenku..com/view/915abfa7f524ccbff1218441.html
4. Buy Weimeng fbm-220. The shape, CPU and memory of the two routes are the same, but the price of vimen fbm-220 is 50% cheaper. Although Annet nr940 is a four WAN port, the number of access machines with four bandwidths is only 30, which is unrealistic and makes consumers waste money. Weimeng is a big brand of regular manufacturers, with guaranteed after-sales service. Weimeng wayos soft routing has been on the market for nearly five years, and its procts are mature and stable, but Annet is only on the market this year.
5. 1： Connection of router hardware
1. First, connect the network cable of modem end with WAN interface on router (this interface is usually different in color or location from several other interfaces with the same appearance) as shown in the figure:
note: for example, for the network connection mode of direct access to the home, such as broadband in some residential areas, directly connect this network cable to WAN interface without modem connection
2. In addition, prepare a network cable to connect any of the four LAN ports (the Yellow interface in the figure below), and connect the other end to the computer network port If you use wireless mode, please skip)
3. Connect the power line of modem and router, and turn on the switch (some brand devices start automatically after they are connected, and there is no switch), then all the hardware connections of the above routers are completed
2: router connection settings
1. Login router settings interface:
open the browser and enter the router login address in the address bar. Different brands have different login addresses, but most of them are 192.168.0.1 or 192.168.1.1 (please check the label on the back of the router or router instructions). As shown in the following figure:
2. Enter the login user name and password. For the default user name and password, please check the label on the back of the router or the instruction manual. As shown in the following figure:
note: if the login window still cannot pop up after entering the correct login address, please check whether the local connection has been connected. In addition, please set the IP setting of the local connection to automatically obtain the IP
3. After entering the password correctly, you will enter the router setting interface. Generally, the router that has not been set will automatically pop up the setting guidance interface, as shown in the figure:
most families use PPPoE mode. If you are not sure, you can choose the first option. Here we will explain it in PPPoE mode
4. After selecting the connection mode, click next, and the user name and password input interface will appear. The user name and password filled in here is provided by the operator when handling broadband
5. After filling in the correct user name and password, click next to complete the connection of the router. If you need to access the Internet through wireless mode, please see the next wireless connection setting method
(if other computers need to access the Internet through this router, just connect the network cable to the LAN port.)
3: setting method of wireless connection
1. Turn on the wireless connection function and set the wireless connection name. Other options are usually default
2. Set the password of wireless connection according to the figure below
note: the setting interfaces of different brands of routers are different, but they are almost the same. You can complete the relevant settings through the guidance in the figure above
3. The computer opens the wireless network card, finds the set wireless network name, clicks connect, and enters the set password to connect normally.
1. First, connect the network cable of modem end with WAN interface on router (this interface is usually different in color or location from several other interfaces with the same appearance) as shown in the figure:
note: for example, for the network connection mode of direct access to the home, such as broadband in some residential areas, directly connect this network cable to WAN interface without modem connection
2. In addition, prepare a network cable to connect any of the four LAN ports (the Yellow interface in the figure below), and connect the other end to the computer network port If you use wireless mode, please skip)
3. Connect the power line of modem and router, and turn on the switch (some brand devices start automatically after they are connected, and there is no switch), then all the hardware connections of the above routers are completed
2: router connection settings
1. Login router settings interface:
open the browser and enter the router login address in the address bar. Different brands have different login addresses, but most of them are 192.168.0.1 or 192.168.1.1 (please check the label on the back of the router or router instructions). As shown in the following figure:
2. Enter the login user name and password. For the default user name and password, please check the label on the back of the router or the instruction manual. As shown in the following figure:
note: if the login window still cannot pop up after entering the correct login address, please check whether the local connection has been connected. In addition, please set the IP setting of the local connection to automatically obtain the IP
3. After entering the password correctly, you will enter the router setting interface. Generally, the router that has not been set will automatically pop up the setting guidance interface, as shown in the figure:
most families use PPPoE mode. If you are not sure, you can choose the first option. Here we will explain it in PPPoE mode
4. After selecting the connection mode, click next, and the user name and password input interface will appear. The user name and password filled in here is provided by the operator when handling broadband
5. After filling in the correct user name and password, click next to complete the connection of the router. If you need to access the Internet through wireless mode, please see the next wireless connection setting method
(if other computers need to access the Internet through this router, just connect the network cable to the LAN port.)
3: setting method of wireless connection
1. Turn on the wireless connection function and set the wireless connection name. Other options are usually default
2. Set the password of wireless connection according to the figure below
note: the setting interfaces of different brands of routers are different, but they are almost the same. You can complete the relevant settings through the guidance in the figure above
3. The computer opens the wireless network card, finds the set wireless network name, clicks connect, and enters the set password to connect normally.
6. Look, your upper branch doesn't support multiple lines, otherwise it doesn't work. I am fbm220, using
network disk
and so on. Upload can't be double superimposed, or single line
network disk
and so on. Upload can't be double superimposed, or single line
7. I haven't used this type of router, but now most routers can work in 5g mode. Consider whether your router only supports old wireless communication protocols. The maximum speed is 57M. Try a new version.
8. How many megabytes are you? If the network is less than 100 megabytes, close test from the router. Because the signal through the wall will be weakened, if it is more than 200 MB network, your router needs to support 5g network. Your device also needs to support Gigabit networks. 11. AC signal supports gigabit network
9. You can contact the online customer service to send you the firmware No. 3.30, which optimizes the memory and solves some other problems.
Hot content