Mining setting graphics card utilization

2. If one of his functions is relatively low, you want to set it, and then find one of his related parameters to set the input upper limit.

3. mining needs graphics card to work with high load. After the mining software is turned on, the graphics card will not run at the lowest frequency. Moreover, if the graphics card is forced to operate at the lowest frequency, the efficiency is very low, and it has little practical significance.

4. The core can exceed 1g, and the video memory is 5200mhz. If you worry about the heat dissipation, the core is 930mhz, and the video memory is 5000mhz (without external heat dissipation). If you install water cooling or better heat dissipation, you can exceed more, or you can exchange fire and overclocking

5. Under x240, FN + ESC can be used to enable and disable FN locking function
after the FN locking function is disabled: the FN locking indicator is off. To use the special functions of each key, press the function key directly. To enter F1-F12, press the FN key and the corresponding function key. After the FN locking function is enabled: the FN locking indicator is on. To enter F1-F12, press the function key directly. To use the special functions of each key, press the FN key and the corresponding function key
hope to help you!!!

6. N card has not been used, according to the habit of a card and u, I is to control the priority. The higher the I value, the lower the computer card, the slower the mining, and you can do something else

7. The first step in setting up mining equipment is to choose the right hardware. This article will focus on GPU (graphics card) mining, of course, you can use CPU or ASIC equipment mining. Amd graphics card architecture is very beneficial to mining. NVIDIA card is not suitable for mining because of its low hash rate. The best NVIDIA graphics cards are less than 0.5 megahash. Notebook Hardware mining is not as good as NVIDIA card, which is a bad option for mining. You need to use a desktop system for mining. There is a desktop system to ensure adequate cooling of the hardware

the graphics card or card needs to be able to match the motherboard, and the power supply must have enough PCI-E connector. Before determining the graphics card, pay attention to these. In order for the system to cool down sufficiently, you need to remove the cover of the chassis in order to get better heat dissipation. This is what people call "open air rig.". If you can aim the system at a fan or air conditioner, you can make the device cooler when it's running, thus extending its life and keeping it efficient<

graphics processing unit (GPU), also known as display core, visual processor and display chip, is a kind of microprocessor specialized in image operation on personal computers, workstations, game machines and some mobile devices (such as tablet computers, smart phones, etc.)

it is used to convert and drive the display information needed by the computer system, provide the line scan signal to the display, and control the correct display of the display. It is an important component connecting the display and the PC motherboard, and is also one of the important equipment of "man-machine dialogue"

the processor of graphics card is called graphics processor (GPU), which is the "heart" of graphics card. Similar to CPU, GPU is designed to perform complex mathematical and geometric calculations, which are necessary for graphics rendering. Some of the fastest GPUs integrate more transistors than ordinary CPUs.