Terraria mining set

3 Supply proceres:
1. Except for the inconvenient carriers, the supplies within the scope of the supplied equipment shall be collected by each department every day and supplied by the method of replacing the old with the new
2. All temporary or emergency materials should be borrowed and returned by the Department
3. If the departments need special equipment, they should inform the supply room in advance for preparation
4. In case of any error or damage to the supplies, the supply room should be informed to replace them in time
5. All equipment stained with pus and blood should be washed and cleaned by the Department immediately to avoid coagulation damage. Articles used by infectious patients shall be disinfected by each department before returning
6. Those whose aseptic date is more than one week or whose seal has been opened shall not be used again< (4) dressing requirements for preparation equipment:
L. all wrapping cloth, treatment towel and hole towel must be clean and undamaged, and they must be changed and washed after each use
2. Clean metal instruments with oil after each cleaning to avoid rust damage
3. All kinds of needles should be clean, unobstructed and sharp, and the size of the inclined plane and the length of the needle stem should meet the requirements
4. Glassware should be washed and cleaned according to regulations, and sterilized strictly
5. Sharp instruments such as knives and scissors should be kept separately from general instruments
6. Rubber procts should be kept in a cool place to avoid freezing in winter to prevent deformation and folding. Gloves should be regularly checked on the powder, where the quality of soft or adhesive, must not be used
7. All articles must be labeled with the name, quantity, alt or child use, sterilization date and serial number for inspection
8. The dressing should be easy, soft, smooth and easy to absorb water. All burr should be folded inside, no foreign matter, suitable size, must be strictly sterilized before use< (5) disinfection and sterilization work
1. Appropriate sterilization methods should be adopted according to the nature of the articles, and aseptic proceres and time should be strictly controlled
2. When using high-pressure steam sterilization method, check whether the double-layer cloth is not damaged, whether the articles are clean and whether the wrapping is tight before sterilization. Do not squeeze when placing glass. The sterilizer should not leave without permission, and should strictly control the pressure and time to ensure the sterilization effect. After sterilization, the pot door can be opened only when the pointer of the barometer drops to "0", so as to avoid danger. The sterilization efficiency of the pressure cooker should be evaluated regularly, and the maintenance of the autoclave should be paid attention to. The autoclave should be washed every time (every day) before use
3. Wash hands, wear masks, hats and work clothes before getting sterile articles
4. Sterilized articles and non sterilized articles should be placed strictly to avoid confusion
5. For items that cannot be sterilized by high pressure, boiling method should be used, such as glass and enamel, which should be put into water first and then boiled for 10 minutes, while for rubber, which should be put into water for 10 minutes
6. Those who are not suitable for the above methods can be disinfected with chemicals, such as knives, scissors, cystoscopes, catgut, etc. they must be washed and cleaned before immersion, and the disinfectant solution used should be replaced regularly (container disinfection)