Mining temperature control
Publish: 2021-05-10 00:12:29
1.
the second is the camera. Both mobile phones have "makeshift" cameras, but the Xiaomi 10 is equipped with Samsung's latest sensors, supporting 8K video recording of the same level as the Samsung S20. Although recording 8K video only has 24 frames, it is enough to create some scenes (of course, 8K video at this stage is more for taste)
although iqoo 3 has 48 million main cameras, its sensor is IMX 582. This sensor is relatively low-end. The 1598 yuan vivo Z5 also uses this sensor. You can experience it yourself. Limited by the performance of the sensor, iqoo 3 only supports up to 4K 30 frame video recording, which is really a bit stretched. In some aspects of personalized experience, iqoo 3 is not as good as Xiaomi 10. Such as the lack of al speakers, does not support wireless charging and so on. To sum up, Xiaomi 10 is a mobile phone with relatively balanced experience so far, and spending 400 yuan more on Xiaomi 10 will be a better choice. With 90hz screen, wireless charging, 8K video and al speakers, it's definitely worth paying 400 yuan more for these experiences
Which is better, iqoo 3 or Xiaomi 10. In advance, appearance is a subjective factor, and everyone's eyes are different. Therefore, the appearance of two mobile phones is not evaluated
comparative evaluation of iqoo3 and Xiaomi 10:
the second is the camera. Both mobile phones have "makeshift" cameras, but the Xiaomi 10 is equipped with Samsung's latest sensors, supporting 8K video recording of the same level as the Samsung S20. Although recording 8K video only has 24 frames, it is enough to create some scenes (of course, 8K video at this stage is more for taste)
although iqoo 3 has 48 million main cameras, its sensor is IMX 582. This sensor is relatively low-end. The 1598 yuan vivo Z5 also uses this sensor. You can experience it yourself. Limited by the performance of the sensor, iqoo 3 only supports up to 4K 30 frame video recording, which is really a bit stretched. In some aspects of personalized experience, iqoo 3 is not as good as Xiaomi 10. Such as the lack of al speakers, does not support wireless charging and so on. To sum up, Xiaomi 10 is a mobile phone with relatively balanced experience so far, and spending 400 yuan more on Xiaomi 10 will be a better choice. With 90hz screen, wireless charging, 8K video and al speakers, it's definitely worth paying 400 yuan more for these experiences
2. I recommend you go to oyuan.com.
3. 1. Two way Trading: suitable for bull market and bear market. Two way trading is the most common trading method of Jushi wealth ggtrade at present. It can operate and invest according to the trend of the currency market, and can buy up or down. Moreover, near the end of the year, Jushi wealth ggtrade platform has also launched a series of preferential benefits, such as the increase of investment yield by 20%, which is a great blessing for the majority of investors
2. Hoarding method: suitable for bull market and bear market. Hoarding money is the simplest and most difficult way to play. The most simple reason is that after buying a certain currency or several currencies, holding it for half a year or more does not operate. Basically, the lowest income is ten times. But it's very easy for novices to see that the income is high, or they plan to change the car or get off the car when they encounter a cut in the currency price. It's very difficult for many people to insist on not operating for a month, let alone a year. So this is actually the most difficult
3. Bull market chasing method: only suitable for bull market. With a part of spare money, it's better not to use more than a fifth of it. This method is suitable for playing the coins with a market value of 20-100, because at least it won't hold fast for too long. For example, if you buy the first counterfeit currency and wait for it to rise by 50% or more, you can change it into the next currency that falls sharply, and so on. If your first counterfeit currency is locked up, then continue to wait, and the bull market will surely be relieved. Under the premise of currency can not be too pit dad, this play is not easy to control, new people need to be careful< 4. Hourglass car changing method: suitable for bull market. In the bull market, almost all the money you buy will go up. The capital is a huge hourglass, which graally infiltrates into every coin, starting from the big coin. There is an obvious law of currency price rise, that is, leading currencies rise first, such as BTC, ETH, dash, etc., and then mainstream currencies start to rise, such as LTC, XmR, EOS, Neo, qtum, etc. Then there is the general rise of currencies that have not risen, such as RDN, XRP, Zec, and so on. Then there is the rise of various small currencies in turn. But if bitcoin goes up, you can choose the next level, the currency that hasn't gone up, and then start to build positions< 5. Pyramid bottom reading method: it is suitable for the prediction of a big drop. Bottom hunting method: 80% of the entrusted currency price is used to buy one tenth of the bullet's position, 70% of the entrusted currency price is used to buy two tenths of the bullet's position, 60% of the entrusted currency price is used to buy three tenths of the bullet's position, and 50% of the entrusted currency price is used to buy four tenths of the bullet's position
6. Moving average method: understand the basis of K-line. The index parameters are Ma5, ma10, mA20, ma30 and MA60, and the level is one day line. If current price is above Ma5 and ma10 line, hold firm. If Ma5 falls below ma10, sell currency, if Ma5 rises above ma10, buy Jiancang
7. Violent hoarding method: be familiar with coins, only suitable for long-term high-quality coins. If there is a sum of working capital, the current price of a certain currency is $8, you can entrust $7 to buy it. When the purchase is successful, you can entrust $8.8 to sell it. Profit to hoard money. The working capital is taken out and continues to wait for the next opportunity. Adjust dynamically according to the current price. If there are three such opportunities in a month, you can hoard a lot of money. The formula is that the opening price is equal to the current price multiplied by 90%, and the selling price is equal to the current price multiplied by 110%
8. Elsio's violent compound interest method: continuously participate in ICO. When the new currency rises by 3-5 times, take away the principal and invest in another ICO, the profit will continue to stay and circulate
9. Circular band method: find the black car currency like etc, increase the position when the currency price keeps falling, and then continue to increase the position when the currency price keeps falling, and then continue to sell when the profit is made
10. Small coin violence: if you have 10000 RMB, divide it into ten parts and buy ten different types of small coins. The best price is less than 3 RMB. After you buy it, don't worry. Don't turn 3-5 times, don't ship, don't ship, put the long line. If a coin is tripled, take away the principal of 1000 yuan, and then put in a small coin. So compound interest income is very exaggerated!
2. Hoarding method: suitable for bull market and bear market. Hoarding money is the simplest and most difficult way to play. The most simple reason is that after buying a certain currency or several currencies, holding it for half a year or more does not operate. Basically, the lowest income is ten times. But it's very easy for novices to see that the income is high, or they plan to change the car or get off the car when they encounter a cut in the currency price. It's very difficult for many people to insist on not operating for a month, let alone a year. So this is actually the most difficult
3. Bull market chasing method: only suitable for bull market. With a part of spare money, it's better not to use more than a fifth of it. This method is suitable for playing the coins with a market value of 20-100, because at least it won't hold fast for too long. For example, if you buy the first counterfeit currency and wait for it to rise by 50% or more, you can change it into the next currency that falls sharply, and so on. If your first counterfeit currency is locked up, then continue to wait, and the bull market will surely be relieved. Under the premise of currency can not be too pit dad, this play is not easy to control, new people need to be careful< 4. Hourglass car changing method: suitable for bull market. In the bull market, almost all the money you buy will go up. The capital is a huge hourglass, which graally infiltrates into every coin, starting from the big coin. There is an obvious law of currency price rise, that is, leading currencies rise first, such as BTC, ETH, dash, etc., and then mainstream currencies start to rise, such as LTC, XmR, EOS, Neo, qtum, etc. Then there is the general rise of currencies that have not risen, such as RDN, XRP, Zec, and so on. Then there is the rise of various small currencies in turn. But if bitcoin goes up, you can choose the next level, the currency that hasn't gone up, and then start to build positions< 5. Pyramid bottom reading method: it is suitable for the prediction of a big drop. Bottom hunting method: 80% of the entrusted currency price is used to buy one tenth of the bullet's position, 70% of the entrusted currency price is used to buy two tenths of the bullet's position, 60% of the entrusted currency price is used to buy three tenths of the bullet's position, and 50% of the entrusted currency price is used to buy four tenths of the bullet's position
6. Moving average method: understand the basis of K-line. The index parameters are Ma5, ma10, mA20, ma30 and MA60, and the level is one day line. If current price is above Ma5 and ma10 line, hold firm. If Ma5 falls below ma10, sell currency, if Ma5 rises above ma10, buy Jiancang
7. Violent hoarding method: be familiar with coins, only suitable for long-term high-quality coins. If there is a sum of working capital, the current price of a certain currency is $8, you can entrust $7 to buy it. When the purchase is successful, you can entrust $8.8 to sell it. Profit to hoard money. The working capital is taken out and continues to wait for the next opportunity. Adjust dynamically according to the current price. If there are three such opportunities in a month, you can hoard a lot of money. The formula is that the opening price is equal to the current price multiplied by 90%, and the selling price is equal to the current price multiplied by 110%
8. Elsio's violent compound interest method: continuously participate in ICO. When the new currency rises by 3-5 times, take away the principal and invest in another ICO, the profit will continue to stay and circulate
9. Circular band method: find the black car currency like etc, increase the position when the currency price keeps falling, and then continue to increase the position when the currency price keeps falling, and then continue to sell when the profit is made
10. Small coin violence: if you have 10000 RMB, divide it into ten parts and buy ten different types of small coins. The best price is less than 3 RMB. After you buy it, don't worry. Don't turn 3-5 times, don't ship, don't ship, put the long line. If a coin is tripled, take away the principal of 1000 yuan, and then put in a small coin. So compound interest income is very exaggerated!
4. That depends on what the 6 property market is cold, I think the AC, gelid, still can not hold, it can only be water-cooled
5. Hello, building owner
the normal temperature of each hardware is almost the same as that of each brand computer
the temperature of the graphics card:
the graphics card is generally the highest temperature hardware in the whole chassis, 50-70 ℃ (or lower) under normal conditions. When running large-scale 3D games or playing high-definition video, the temperature can reach about 100 ℃. Generally, it is regarded as normal if it does not exceed 110 ℃ under high load. If necessary, the fan speed can be appropriately increased
CPU temperature:
under normal conditions, 45-65 ℃ or lower, higher than 75-80 ℃, check whether the silicone grease between the CPU and the fan is invalid, replace the CPU fan or st the fan, some CPUs will protect themselves, and if the temperature is too high, the frequency will automatically decrease (generally half of the standard frequency)<
CPU fan:
generally 1000-2500 RPM (it may be adjusted dynamically e to the different working conditions of the main board or CPU). The early CPU fan may reach 3000 rpm or higher, the server fan may be higher than the general fan, which can reach 10000 RPM, and some over frequency special fans can also reach 5000 rpm, Below 500 rpm, it may be necessary to check whether the fan works normally or there is too much st<
motherboard temperature:
under normal conditions, the temperature is about 40-60 ℃ (or lower), depending on different motherboard brands and chipsets. If the temperature is higher than 70 ℃, it may be necessary to consider adding a chassis fan or turning on the chassis, and using an external fan (such as Hongyun fan)<
motherboard fan:
most motherboards do not have this function, only a few motherboards have this function, which is similar to CPU fan, but the speed is generally slightly lower<
temperature of graphics card:
generally, the temperature of graphics card is the highest in the whole chassis. Under normal conditions, the temperature is 50-70 ℃ (or lower). When running large-scale 3D games or playing high-definition video, the temperature can reach about 100 ℃. Generally, under high load, it is regarded as normal if the temperature does not exceed 110 ℃. If necessary, increase the fan speed appropriately<
temperature of hard disk:
generally, the temperature of hard disk is about 30-60 ℃, and it is often the lowest or the second lowest hardware in the chassis. If the temperature is over 70 ℃, the chassis fan can be considered
the above scope is for reference only. If it is not applicable, please point out (because it is impossible to include all hardware configurations)
all the hardware test data are for reference only, subject to the specific operation effect in actual use. The hardware status can be confirmed by hand touch, opening the chassis to observe the speed and other methods. As long as the system does not crash frequently and restart automatically, and the system does not report errors, it is considered normal
some hardware sensors may be affected by the BIOS version, and the data is obviously inaccurate. You can consider upgrading to the latest BIOS Version (if you have no experience, please consider carefully)
note: because the heat dissipation condition of notebook is not as good as that of desktop, the temperature may be slightly higher than that of desktop
above (from super rabbit)
...
it is generally stable within the range of temperature rise of 30 ℃. That is to say, the temperature of the CPU is 65 degrees. If the maximum temperature is 35 degrees in summer, the temperature of the CPU is allowed to rise to 30 degrees. And so on, if your ambient temperature is now 20 degrees, the CPU should not exceed 50 degrees. Of course, the lower the temperature, the better. No matter how much you overclock, don't make your CPU over 30 degrees above the ambient temperature. But this is a desktop. If it's a laptop, it's easy to exceed 60 degrees in a 30 degree environment, and it's also common to play games 80-90.
first of all, it's important to note that the temperature measurement principles of desktop and Notebook CPUs are different. Generally speaking, desktop CPUs rely on the temperature probe near the CPU slot for detection, and there is a certain error between the detection temperature and the actual core temperature, When you see the detection temperature of 80 ℃, its core temperature is likely to have reached 90 ℃ or even higher; The temperature detection of notebook CPU is completed by thermistor, which is located below the CPU package, close to the core of CPU, and its measurement error is much smaller than that of desktop
secondly, many people think that notebook CPU uses less power consumption, and also has SpeedStep technology, which can withstand higher temperature, but it is not. It is also because of the structure of the notebook that determines the limitation of its heat dissipation equipment. Generally speaking, it adopts the form of fan + heat pipe. Moreover, e to the high density, the temperature of the CPU directly affects the user's body feeling and system stability. Therefore, I personally believe that the temperature limit of the notebook CPU can never reach a level similar to 100 or above, This temperature, whether it's package base or kernel or motherboard, can't bear. UB
in addition, this of course depends on the core of the CPU. In Intel system, the power consumption is low, and the temperature is naturally lower than that of the high-power version. Especially in some ULV versions, the p-m version has less heat than the P4-M version, and the heat of quanmeida should be the smallest.. And so on
in a word, the specific temperature tolerance limit is related to the core, structure and many other aspects, which can not be generalized. In particular, we need to remind you that the heating problem of the notebook computer must not be ignored, which is related to the stability of the system, users and data security
now we need to add a few points:
1. The problem of temperature and voltage
the increase in temperature is e to the fact that the calorific value of u is greater than that of the radiator. Once the calorific value and heat dissipation are in balance, the temperature will not increase. The calorific value is determined by the power of u, and the power is proportional to the voltage. Therefore, to control the temperature well, it is necessary to control the core voltage of CPU. However, it is easy to say that if the voltage is too low, it will cause instability, especially when the overclocking amplitude is large. Most of the time, when the CPU temperature does not reach the critical value, the blue screen of the system will restart. At this time, the main factor affecting the stability of the system is not the temperature, but the voltage. So how to set the voltage is very important in the limit of overclocking. If it is set high, the radiator will not hold. If it is set low, the u will not hold
2. The temperature measurement methods of different motherboards are not the same, even the motherboards of the same brand and model, e to the difference of the distance between the temperature probe and the CPU, the measured temperature also varies greatly. Therefore, it is unscientific to say how much temperature is safe in general. In my opinion, if you run super PI or 3dmark at higher room temperature in summer, you can pass the test as long as you can. You don't have to trust the temperature data of software test too much
3. What is stability? This has always been a hot topic that we like to discuss
computer is an electronic proct, and the coordination of its components is extremely delicate. No one can say that my computer is absolutely stable, and stability is relative. Overclocking in a reasonable range can resist the catastrophic consequences of most minor instability factors; In the extreme edge of hardware, overclocking, a very small current fluctuation may bring a series of follow-up reactions, and eventually your screen may turn blue or black:) how much frequency is stable? This problem only aims at the specific situation, and there is no formula to apply. It can only rely on experience and personal practice. So here's another reminder to some friends who ask "how much can my computer overclock?" they'd better try it according to the scientific overclocking steps<
generally, you can know it by entering the BIOS.
recommend several CPU temperature control software to you, and you can understand the temperature change.
1. Waterfall pro (download address: Sina Download Center) is an old computer cooling software with small volume and powerful function, which can effectively control the rise of CPU temperature and optimize CPU speed, Monitor CPU usage and power consumption< Second, cpuidle
cpuidle (download address: Sina Download Center) can significantly rece the operating temperature of CPU, prolong its service life, and rece the power consumption of CPU. Different from other energy-saving software, cpuidle can still play a significant role even in the case of overload< Softtool II (download address: Sina Download Center) is a green chip cooling software, which has the advantages of occupying less system resources and memory space, without any settings, and can be used directly after decompression< Vcool (download address: Sina Download Center) is a cooling software specially designed for AMD CPU. And it's a green software. It's very simple to use and takes up less system resources. The cooling effect of AMD CPU is good< 5. CPU cooling master (download address: Sina Download Center) is a compact CPU cooling software. The system kernel adopts assembly technology to directly optimize the CPU unit, which is suitable for all types of CPU procts and plays a good role in optimizing and protecting the CPU
the normal temperature of each hardware is almost the same as that of each brand computer
the temperature of the graphics card:
the graphics card is generally the highest temperature hardware in the whole chassis, 50-70 ℃ (or lower) under normal conditions. When running large-scale 3D games or playing high-definition video, the temperature can reach about 100 ℃. Generally, it is regarded as normal if it does not exceed 110 ℃ under high load. If necessary, the fan speed can be appropriately increased
CPU temperature:
under normal conditions, 45-65 ℃ or lower, higher than 75-80 ℃, check whether the silicone grease between the CPU and the fan is invalid, replace the CPU fan or st the fan, some CPUs will protect themselves, and if the temperature is too high, the frequency will automatically decrease (generally half of the standard frequency)<
CPU fan:
generally 1000-2500 RPM (it may be adjusted dynamically e to the different working conditions of the main board or CPU). The early CPU fan may reach 3000 rpm or higher, the server fan may be higher than the general fan, which can reach 10000 RPM, and some over frequency special fans can also reach 5000 rpm, Below 500 rpm, it may be necessary to check whether the fan works normally or there is too much st<
motherboard temperature:
under normal conditions, the temperature is about 40-60 ℃ (or lower), depending on different motherboard brands and chipsets. If the temperature is higher than 70 ℃, it may be necessary to consider adding a chassis fan or turning on the chassis, and using an external fan (such as Hongyun fan)<
motherboard fan:
most motherboards do not have this function, only a few motherboards have this function, which is similar to CPU fan, but the speed is generally slightly lower<
temperature of graphics card:
generally, the temperature of graphics card is the highest in the whole chassis. Under normal conditions, the temperature is 50-70 ℃ (or lower). When running large-scale 3D games or playing high-definition video, the temperature can reach about 100 ℃. Generally, under high load, it is regarded as normal if the temperature does not exceed 110 ℃. If necessary, increase the fan speed appropriately<
temperature of hard disk:
generally, the temperature of hard disk is about 30-60 ℃, and it is often the lowest or the second lowest hardware in the chassis. If the temperature is over 70 ℃, the chassis fan can be considered
the above scope is for reference only. If it is not applicable, please point out (because it is impossible to include all hardware configurations)
all the hardware test data are for reference only, subject to the specific operation effect in actual use. The hardware status can be confirmed by hand touch, opening the chassis to observe the speed and other methods. As long as the system does not crash frequently and restart automatically, and the system does not report errors, it is considered normal
some hardware sensors may be affected by the BIOS version, and the data is obviously inaccurate. You can consider upgrading to the latest BIOS Version (if you have no experience, please consider carefully)
note: because the heat dissipation condition of notebook is not as good as that of desktop, the temperature may be slightly higher than that of desktop
above (from super rabbit)
...
it is generally stable within the range of temperature rise of 30 ℃. That is to say, the temperature of the CPU is 65 degrees. If the maximum temperature is 35 degrees in summer, the temperature of the CPU is allowed to rise to 30 degrees. And so on, if your ambient temperature is now 20 degrees, the CPU should not exceed 50 degrees. Of course, the lower the temperature, the better. No matter how much you overclock, don't make your CPU over 30 degrees above the ambient temperature. But this is a desktop. If it's a laptop, it's easy to exceed 60 degrees in a 30 degree environment, and it's also common to play games 80-90.
first of all, it's important to note that the temperature measurement principles of desktop and Notebook CPUs are different. Generally speaking, desktop CPUs rely on the temperature probe near the CPU slot for detection, and there is a certain error between the detection temperature and the actual core temperature, When you see the detection temperature of 80 ℃, its core temperature is likely to have reached 90 ℃ or even higher; The temperature detection of notebook CPU is completed by thermistor, which is located below the CPU package, close to the core of CPU, and its measurement error is much smaller than that of desktop
secondly, many people think that notebook CPU uses less power consumption, and also has SpeedStep technology, which can withstand higher temperature, but it is not. It is also because of the structure of the notebook that determines the limitation of its heat dissipation equipment. Generally speaking, it adopts the form of fan + heat pipe. Moreover, e to the high density, the temperature of the CPU directly affects the user's body feeling and system stability. Therefore, I personally believe that the temperature limit of the notebook CPU can never reach a level similar to 100 or above, This temperature, whether it's package base or kernel or motherboard, can't bear. UB
in addition, this of course depends on the core of the CPU. In Intel system, the power consumption is low, and the temperature is naturally lower than that of the high-power version. Especially in some ULV versions, the p-m version has less heat than the P4-M version, and the heat of quanmeida should be the smallest.. And so on
in a word, the specific temperature tolerance limit is related to the core, structure and many other aspects, which can not be generalized. In particular, we need to remind you that the heating problem of the notebook computer must not be ignored, which is related to the stability of the system, users and data security
now we need to add a few points:
1. The problem of temperature and voltage
the increase in temperature is e to the fact that the calorific value of u is greater than that of the radiator. Once the calorific value and heat dissipation are in balance, the temperature will not increase. The calorific value is determined by the power of u, and the power is proportional to the voltage. Therefore, to control the temperature well, it is necessary to control the core voltage of CPU. However, it is easy to say that if the voltage is too low, it will cause instability, especially when the overclocking amplitude is large. Most of the time, when the CPU temperature does not reach the critical value, the blue screen of the system will restart. At this time, the main factor affecting the stability of the system is not the temperature, but the voltage. So how to set the voltage is very important in the limit of overclocking. If it is set high, the radiator will not hold. If it is set low, the u will not hold
2. The temperature measurement methods of different motherboards are not the same, even the motherboards of the same brand and model, e to the difference of the distance between the temperature probe and the CPU, the measured temperature also varies greatly. Therefore, it is unscientific to say how much temperature is safe in general. In my opinion, if you run super PI or 3dmark at higher room temperature in summer, you can pass the test as long as you can. You don't have to trust the temperature data of software test too much
3. What is stability? This has always been a hot topic that we like to discuss
computer is an electronic proct, and the coordination of its components is extremely delicate. No one can say that my computer is absolutely stable, and stability is relative. Overclocking in a reasonable range can resist the catastrophic consequences of most minor instability factors; In the extreme edge of hardware, overclocking, a very small current fluctuation may bring a series of follow-up reactions, and eventually your screen may turn blue or black:) how much frequency is stable? This problem only aims at the specific situation, and there is no formula to apply. It can only rely on experience and personal practice. So here's another reminder to some friends who ask "how much can my computer overclock?" they'd better try it according to the scientific overclocking steps<
generally, you can know it by entering the BIOS.
recommend several CPU temperature control software to you, and you can understand the temperature change.
1. Waterfall pro (download address: Sina Download Center) is an old computer cooling software with small volume and powerful function, which can effectively control the rise of CPU temperature and optimize CPU speed, Monitor CPU usage and power consumption< Second, cpuidle
cpuidle (download address: Sina Download Center) can significantly rece the operating temperature of CPU, prolong its service life, and rece the power consumption of CPU. Different from other energy-saving software, cpuidle can still play a significant role even in the case of overload< Softtool II (download address: Sina Download Center) is a green chip cooling software, which has the advantages of occupying less system resources and memory space, without any settings, and can be used directly after decompression< Vcool (download address: Sina Download Center) is a cooling software specially designed for AMD CPU. And it's a green software. It's very simple to use and takes up less system resources. The cooling effect of AMD CPU is good< 5. CPU cooling master (download address: Sina Download Center) is a compact CPU cooling software. The system kernel adopts assembly technology to directly optimize the CPU unit, which is suitable for all types of CPU procts and plays a good role in optimizing and protecting the CPU
6. AMD is hot, and the radiator is not strong enough, so it is easy to break the safety temperature, and it is forced to restart by the motherboard.
[this technology is called "burn not dead", although it is for all CPUs, most of the CPUs recruited at present are amd's.
[because Intel has its own temperature control technology, which automatically reces the voltage when the temperature is high]
in addition, the stability of the computer is inseparable from the motherboard and graphics card, And power supply.
the power supply should choose quanhan [famous in the server], Zhenhua, Antike, gujia and other power supply with 80plus gold medal certification.
the first choice of motherboard is ASUS, gigabyte, MSI, evga, among which the higher the number of power supply phases, the better the digital power supply is than the full analog power supply.
the first choice of graphics card is ASUS, MSI, sotay, Among them...
n card is suitable for playing stand-alone
[because the PhysX engine is not public, it can't be used to design online games unless you want your teammates who use a card to see nothing]
[NVIDIA spooks the PhysX operation of CPU, there are SSE and AVX instructions, but only the spurned x87 floating-point instructions]
[and CPU only uses single thread to execute PhysX, Obviously, it highlights the need to buy your own graphics card]
[in terms of hardware acceleration, n card has CUDA, which strongly supports programmable use of graphics card for auxiliary calculation, but it is also the exclusive first use]
[the losers in the video card bar laugh to death, obviously CUDA mining is much better than OpenCL, they are not installed with CUDA]
[driver, bitcon program prompt error, A card is suitable for online games.
[havok is public and prior to PhysX. Because it was acquired by Intel, it was caught up by PhysX after a period of stagnation]
[because havok technology is now in Intel's hands, Therefore, when more threads of CPU are compatible with havok, the effect is not low at all]
[when there is no a card, the CPU will be automatically selected to render the physical effect. Therefore, online games generally use havok physical operation of card a]
[compared with card n, you can see that no matter what graphics card your teammates use, they can also see]
[in terms of hardware acceleration, card a can only use OpenCL, although it is public, and card n can also be compatible, but the efficiency is low]
[but in terms of hardware acceleration, card a has obvious advantages in driver installation, CUDA driver can't be found and downloaded by ordinary people]
[but OpenCL driver can be found even in 360]
[this technology is called "burn not dead", although it is for all CPUs, most of the CPUs recruited at present are amd's.
[because Intel has its own temperature control technology, which automatically reces the voltage when the temperature is high]
in addition, the stability of the computer is inseparable from the motherboard and graphics card, And power supply.
the power supply should choose quanhan [famous in the server], Zhenhua, Antike, gujia and other power supply with 80plus gold medal certification.
the first choice of motherboard is ASUS, gigabyte, MSI, evga, among which the higher the number of power supply phases, the better the digital power supply is than the full analog power supply.
the first choice of graphics card is ASUS, MSI, sotay, Among them...
n card is suitable for playing stand-alone
[because the PhysX engine is not public, it can't be used to design online games unless you want your teammates who use a card to see nothing]
[NVIDIA spooks the PhysX operation of CPU, there are SSE and AVX instructions, but only the spurned x87 floating-point instructions]
[and CPU only uses single thread to execute PhysX, Obviously, it highlights the need to buy your own graphics card]
[in terms of hardware acceleration, n card has CUDA, which strongly supports programmable use of graphics card for auxiliary calculation, but it is also the exclusive first use]
[the losers in the video card bar laugh to death, obviously CUDA mining is much better than OpenCL, they are not installed with CUDA]
[driver, bitcon program prompt error, A card is suitable for online games.
[havok is public and prior to PhysX. Because it was acquired by Intel, it was caught up by PhysX after a period of stagnation]
[because havok technology is now in Intel's hands, Therefore, when more threads of CPU are compatible with havok, the effect is not low at all]
[when there is no a card, the CPU will be automatically selected to render the physical effect. Therefore, online games generally use havok physical operation of card a]
[compared with card n, you can see that no matter what graphics card your teammates use, they can also see]
[in terms of hardware acceleration, card a can only use OpenCL, although it is public, and card n can also be compatible, but the efficiency is low]
[but in terms of hardware acceleration, card a has obvious advantages in driver installation, CUDA driver can't be found and downloaded by ordinary people]
[but OpenCL driver can be found even in 360]
7. Refrigerator, fan, speed, water cooling
8. Take No.22 bus to Tuanchengshan, and then take No.11 bus at Shiliuyuan to the terminal. When you get to the terminal, you will get to the gymnasium.
Hot content