Rtx3090 mining evaluation

1. For local tyrants, it doesn't matter.

2. Intel i7-10700k, Rog z490-e gaming motherboard, Rog loongshen 360 integrated water cooling, Rog leiying 850W gold medal mole power supply, player's national Helios chassis, ASUS tufrtx3090, Zhiqi Royal dry memory, Samsung evo970 (plus)

3. Q: how to get the soul crystal of adventure and mining? What's the use

answer: adventure and mining Soul Crystal need to be obtained by killing the boss of the mining area, and the boss after level 60 of the mining area is rewarded with soul crystal. Or arena exchange, but the price is very high; Or open a high-grade ore pack, you have a chance to get it. The purpose of soul crystal is to create treasure sets for 20 enhanced characters. Each treasure set needs 6 soul crystals of different colors, and the demand is relatively large.

4. There is no comparability between the two graphics cards. The former is a consumer game independent graphics card, while the latter is a professional graphics design graphics card.
the focus of the two graphics cards is different. It is very easy to design new graphics cards for graphic design, but it is not easy to use consumer game graphics cards for design.
the price of designing new graphics cards is generally high, And it's not easy to play games, especially in Caton, but in image design rendering, it's much better than consumer game graphics card!

5. The abbreviation of virtual machine is JVM (Java virtual machine)

6. VM virtual machine is configured to access the Internet
the first case:
the host uses PPPoE dial-up to access the Internet
method 1: Nat mode
1. Close the operating system in the virtual machine and return to the main interface of the virtual machine
double click "Ethernet" on the top right of the main interface to pop up the "network adapter" dialog box, select "NAT"
2. Start the operating system of the virtual machine, Set IP to dynamic acquisition, that is, through DHCP
at this time, the operating system in the virtual machine uses the IP of the host. If the host can access the Internet, then the virtual machine can also access the Internet< Method 2: host only mode
1. Close the operating system in the virtual machine and return to the main interface of the virtual machine
double click "Ethernet" at the top right of the main interface to pop up the "network adapter" dialog box, select "host only"
2. Right click the dial-up connection to open the PPPoE connection properties and select "advanced", Select "allow other network users to connect through the Internet connection of this computer"
in the "home network" drop-down box, select "VMware network adapter VMnet1"
the IP of the virtual network adapter VMnet1 will automatically change to 192.168.0.1
at this time, ping192.168.0.1 can be connected
3. Enter VMware, start Linux operating system
use netconfig command
set IP to 192.168.0.2 (in the same network segment as the virtual network card)
gateway is 192.168.0.1, that is, IP address of VMware network adapter VMnet1 virtual network card
DNS is set to ISP's DNS, such as 61.147.37.1
4. Restart the network:
#, As long as the host dials up to the Internet, the system of the virtual machine can access the Internet without dialing again
method 3: bridge mode
in this way, the virtual machine is closest to a real machine
1. Close the operating system of the virtual machine and return to the main interface of the virtual machine
double click "Ethernet" at the top right of the main interface to pop up the "network adapter" dialog box, Select "bridge"
2. Install a proxy server such as Sygate or Wingate in the host computer
3. Set the proxy server of the virtual machine as the IP of the host computer
the second case:
in the unit LAN
select "bridge" mode for "Ethernet"
when using this mode, the virtual machine is the same as a real machine, At this time, IP can be set to another available IP in LAN
gateway: address of LAN gateway server (or router)
DNS: address of ISP DNS server

7. Authority issues. Try running root, or sudo ifconfig eth0 up
if you can't, simply disable SELinux.

8. I'm ready to get off work, but I see your problem. Although I'm tired, I'll stick to it and see clearly:
1.q235, which is called scrap iron by our designers,
its Poisson's ratio is 0.23 ~ 0.26,
the coefficient of thermal expansion is 10.6-15x10 ^ - 6 (no scientific calculation symbol, please understand, 10.6-15 times 10 to the negative sixth power, The heat capacity coefficient is 502.4j/kg.k.
the thermal conctivity is 46.4w/m.k
2.ht200, which is our preferred grade of main cast iron,
its Poisson's ratio is 0.23 ~ 0.27,
the thermal expansion coefficient is 8.7 ~ 13.2x10 ^ - 6,
the heat capacity coefficient is 544.3j/kg.k
the thermal conctivity is 46.4 ~ 47.5w/m.k,
as for Young's coefficient, I seldom consider it, so it is difficult to answer, In addition, the coefficient of thermal expansion of materials is different according to the rising degree of heating. The data I listed are the measured data from 100 ℃ to 700 ℃

9. These things have national standards, instry standards, what kind of place, what kind of structure, what kind of material, how much strength, all have requirements. You can refer to the relevant standards yourself.

10.

1. Conventional performance parameters

Plastic ABS is non-toxic and tasteless, and its appearance is ivory translucent, or transparent particles or powder. The density is 1.05 ~ 1.18 g / cm ~ 3, the shrinkage is 0.4% ~ 0.9%, the elastic molus is 2 GPa, the Poisson's ratio is 0.394, the hygroscopicity is & lt; 1%, melting temperature 217 ~ 237 ℃, thermal decomposition temperature & gt; 250℃

The results show that the ABS plastic has good comprehensive properties, high impact strength, chemical stability and good electrical properties; It has good fusibility with 372 plexiglass, can be made into two-color plastic parts, and the surface can be plated with chromium and sprayed with paint; There are high impact, high heat resistance, flame retardant, reinforced, transparent and other levels. The fluidity is worse than hips, better than PMMA, PC and so on, and the flexibility is good; Suitable for making general mechanical parts, wear-resistant parts, transmission parts and telecommunication parts

The mechanical property parameters of ABS have excellent mechanical properties and excellent impact strength, which can be used at very low temperature; Plastic ABS has excellent wear resistance, good dimensional stability and oil resistance, which can be used for bearings under medium load and low speed. The creep resistance of ABS is larger than that of PSF and PC, but smaller than that of PA and POM

The thermal deformation temperature of ABS is 93 ~ 118 ℃, and the proct can be increased by about 10 ℃ after annealing. ABS can still show certain toughness at - 40 ℃, and can be used in the temperature range of - 40 ~ 100 ℃

The electrical properties of ABS are better than that of other ABS, and it is almost not affected by temperature, humidity and frequency, so it can be used in most environments

5, environmental performance parameters

Plastic ABS is not affected by water, inorganic salt, alkali and a variety of acids, but soluble in ketones, aldehydes and chlorinated hydrocarbons, and will proce stress cracking when corroded by glacial acetic acid, vegetable oil, etc. ABS has poor weatherability and is easy to degrade under ultraviolet light; After half a year outdoors, the impact strength decreased by half

extended data:

ABS plastic is a kind of "tough, hard and rigid" material with easy raw materials, good comprehensive performance, low price and wide application. ABS plastic is a terpolymer of acrylonitrile (a), butadiene (b) and styrene (s). The relative content of the three monomers can be arbitrarily changed to make various resins

The recycled material of PC / ABS is an important engineering plastic alloy, which is widely used in the fields of automobile, electronics, office and communication equipment. Nowadays, in order to meet the special requirements of fire safety in the application field (especially in electronic and electrical procts), the flame retardant technology of PC / ABS alloy has become a research hotspot

However, with the development of science and technology, the requirement of environmental friendliness of materials is higher and higher, and the harm of traditional halogen flame retardant is more and more obvious. In engineering, ABS is widely used in engineering pipeline. In municipal engineering, the tank bottom pipeline with higher material requirements can generally use ABS pipeline