Why does milk lump mining have a black screen

1. The secret of milk lump mining:
[mining tools]
wooden PICK: synthesis of arbitrary wooden block * 3 + wooden stick * 2
stone PICK: synthesis of round stone * 3 + wooden stick * 2
iron PICK: synthesis of iron ingot * 3 + wooden stick * 2
diamond pick: synthesis of diamond * + wooden stick * 2
attention should be paid to diamond, gold ore, sulfide ore, nitrated rock, black iron ore, green crystal, brass powder, magnetite powder, etc Fluorite powder must be excavated with iron pick or above, while Obsidian must be excavated with diamond pick. Of course, the higher the level is, the better the rability is. Therefore, it is suggested that novice partners should prepare more stone pick and iron pick. They must have a diamond pick, and the number can be adjusted according to the excavation amount<
[mineable ore]
Coal Mine: looks like black beans
general location: underground / underwater of the main world
Iron Mine:
looks like red beans
general location: the ore below the main world-30 layer is rich
the ore below the main world-70 layer needs [iron Pick]
nitration ore:
light white ~
general location: the ore below the main world-70 layer is rich
sulfide ore:
it looks like gold ore, which is easy to be mistaken<
general location: below the 70th floor of the main world, there are abundant
gold mines:
the brightness of gold can be seen through the partition wall, which is easy to recognize ～
general location: below the 70th floor of the main world, there are abundant
diamond mines:
diamonds, and the prism shape is also bright through the partition wall<
general location: below level 70 of the main world, there are abundant
other acquisition methods:
boss drop - probability of boss drop above the elite monster level of each map
task acquisition - daily task "sweeping threat" acquisition
treasure box extraction - probability acquisition of treasure box monster of each map
Obsidian:
black with red dots. Need a diamond draft
general location: magmatic Island below main world level-150
exclusive ore of Twilight forest
general location: rich below Twilight forest level-128
Green Crystal
general location: rich below Twilight forest level-128
brass powder
general location: rich below Twilight forest level-128
magnetite powder
general location: rich below Twilight forest level-128 The lower part is rich in fluorite powder
general location: the lower part of sk forest-128 is rich in fluorite powder

2.

It's definitely not pulling or pulling wool. It's all like pulling wool. Most of them dig for free, and then sell it

3. Solutions to display black screen:
1. If you don't use the display for a long time, the display will automatically turn into sleep energy saving mode and the screen will be black
solution: take win7 system as an example
(1) right click the blank space on the desktop and select "personalization" in the menu to open the personalization dialog box
(2) click the red box in the above figure and select "Screen Saver" to enter the screen saver setting dialog box
(3) set the screen saver to none. And click "change power settings" to enter the power settings dialog box
(4) click "change plan" to enter the change settings dialog box
(5) in the blue box, click the drop-down triangle, select "never", and then "save changes" to exit
after setting, the display will no longer be black automatically
Second, the display failure causes the black screen
on the internal power supply board of the display, the output capacitance of the power supply is aging, liquid leakage, bulge and failure. When the monitor is just turned on, because the capacitor is not completely necrotic, the power supply is normal in a short time, so it can display normally. After working for a period of time, the power supply is seriously insufficient, causing the backlight of LCD to go out, resulting in the display black screen
solution: send it to a professional display maintenance point for repair. If the components are damaged, the cost is about 30-50 yuan
thirdly, the signal line of the display is loose or in poor contact, which causes the video signal to be transmitted to the display intermittently, resulting in the black screen of the display
solution: re plug, install and fix the display signal cable. If the fault persists, replace the signal line for testing< Fourth, the performance failure and unstable operation of the graphics card lead to the black screen of the display
solution:
1. Test after updating the driver of the graphics card. If the fault persists, replace the graphics card directly for test
note: if you are using an integrated video card, you can install an independent video card for testing. Or directly replace the motherboard with integrated graphics card for testing
5. The performance of the main board is faulty and the operation is unstable, which leads to the black screen of the display. Solution: directly replace the motherboard test.

4. First, the voltage problem (less likely)
the second reason is the problem of the graphics card driver, which can be solved by updating the graphics card driver
the third reason is that the graphics card has quality problems, so take the computer city to repair or replace it with a new one
the fourth reason is the lack of DirectX software or the low version of DirectX, which can be solved by re installing the latest version of DirectX program
for some older or assembled computers, black screen is a common fault. The hardware causes of computer black screen include display damage, graphics card damage, poor contact of graphics card, etc. after eliminating the hardware problems, we can find the reasons from the software aspect.

5. Generally, there are four kinds of black screen faults:
one, all black. The host and display (including indicator light) are not on
Second, the indicator light of the display is on, the indicator light of the host is not on
Third, the indicator lights of the display and the host are on, and the switching power supply cooling fan also rotates normally, but the display does not display
four, the dynamic black screen will be displayed when the machine is started, but it will not be displayed after a while
what kind is yours? Compare and make it clear
that may be because the display signal line or power line is not connected properly, and the brightness contrast knob is accidentally & quot; Shut up;, If the hard disk signal cable is inserted reversely or only one row of pinholes are inserted, it may be that some metal material falls on the motherboard and causes a local short circuit, or the memory mole is not inserted properly. In a word, take out the chassis, clean it up, pull out those wires and insert them again. Pay attention to plug them well, especially the memory, There are two main reasons for computer black screen at present, one is hardware failure, the other is software conflict, and the difference between the two mainly lies in the location of the black screen, that is, the black screen occurs when the machine is started, or the black screen appears in the process of use after the machine is started normally
of course, whether it's hardware failure or software problem, in a sense, it's not isolated. Try to solve it according to the following ideas, and I believe the black screen will be properly solved soon.

6. First of all, you need to find a cave, whether it's a natural cave or a hole g by someone else. You can start your mining journey with torches and manuscripts (including diamond manuscripts)

until you find an underground lava pool (rather than a surface lava pool, which is easily confused with the one generated at sea level), it shows that you are looking for diamonds at the right depth< br />


the diamond vein may be exposed around the rocks in the lava pool. If you look carefully, you can see the diamond. Pick up the prepared diamond draft and you can dig the diamond.

7. Update the video card driver
at present, the computer i5
8g
use ray. The game is normal

8. You know, milk lumps have biological properties. It's just when you're in the past, it's refreshed, or the data remains, and what you see is just a remnant.