How to control the fan of mining video card

1.

The first step in setting up mining equipment is to choose the right hardware. This article will focus on GPU (graphics card) mining, of course, you can use CPU or ASIC equipment mining. Amd graphics card architecture is very beneficial to mining. NVIDIA card is not suitable for mining because of its low hash rate. The best NVIDIA graphics cards are less than 0.5 megahash. Notebook Hardware mining is not as good as NVIDIA card, which is a bad option for mining. You need to use a desktop system for mining. There is a desktop system to ensure adequate cooling of the hardware

the graphics card or card needs to be able to match the motherboard, and the power supply must have enough PCI-E connectors. Before determining the graphics card, pay attention to these. In order for the system to cool down sufficiently, you need to remove the cover of the chassis in order to get better heat dissipation. This is what people call "open air rig.". If you can aim the system at a fan or air conditioner, you can make the device cooler when it's running, thus extending its life and keeping it efficient

2. That depends on what the 6 property market is cold, I think the AC, gelid, still can not hold, it can only be water-cooled

3. Video card fans are mostly intelligent temperature control, with the increase of temperature, fan speed will increase
the fan with stall technology will not rotate until the temperature is reached, but the graphics card will take suction cooling or other cooling methods, which can not be set
if you want to set it, you can search this type of adjustment software on the official website to adjust the fan speed, but the adjusted fan speed is usually constant and will not change according to the temperature
1. Under normal circumstances, the fan speed of the graphics card is temperature controlled and changes with the temperature
2. Not all graphics cards support adjusting the fan speed of the graphics card, which can only be supported by brand design or related software.

4. This is out of control. The video card fan is adjustable automatically
what can be controlled is the CPU fan, which can be adjusted in the main board BIOS
the graphics card should be free of st as far as possible, so that the temperature is not easy to be high.

5.

In the graphics software, you choose Custom to try< Custom has the ratio of the minimum and maximum temperature and speed.

if you set the minimum speed to 30 degrees, there will be 50% of the fan, so the fan will not stop.

the default setting of your graphics card is to start when it is hot at 60 degrees. After your custom setting, 30 degrees is basically normal temperature.

there is no display of the fan setting and speed in the BIOS of the motherboard.

there is no display of the fan setting and speed It's better to use the software of the graphics card manufacturer, such as asus's graphics card software:

6. No problem, the graphics card above 60 degrees are normal, no need to adjust

don't let it exceed 90 degrees. The maximum temperature of most graphics cards is about 120 degrees, so you don't have to worry!

7. Find someone to change the fan of the graphics card
to the one that works normally
it's better to play in the air-conditioned room
or buy a cooling pad

8.

Some CPUs support intelligent temperature control adjustment, and can be set in BIOS

1. The fan pin of CPU must be four pin (the adjustment is effective)

2. After the first screen of power on or restart appears, press the delete key immediately, and adjust to "advanced & quot; through the direction key of the keyboard; Press enter to enter, and then select "H / W monitor & quot; Options to enter,

3 to enter "H / W monitor & quot; You can see the relevant data of CPU operation and the current full speed operation mode. Then you can select the option of "CPU fan mode setting" and press enter

5. After setting the mode, finally press F10 to save and exit. It will be much quieter immediately after restart

video card

most of the video card fans are intelligent temperature controlled, and the fan speed will increase with the increase of temperature
if you want to set it yourself, you can search the adjustment software of this model on the official website of the corresponding brand to adjust the fan speed, but the adjusted fan speed is usually constant and will not change according to the temperature

9. General video card fans are 2-pin, can not rece speed, if you really want to rece speed, you can change a 3-pin fan, and add a governor, governor about 10 yuan.

10. There are two methods. One is to directly brush the BIOS of the graphics card. This method is relatively thorough, and it will be permanently changed after brushing. However, the disadvantage is that the risk is high. If the graphics card is damaged, it can only be renovated
the other is to use software, such as MSI afterburner and ASUS GPU tweak, which have the function of custom fan speed curve. If you use software to adjust, the custom speed will only take effect after opening the software, so it can be set to start with the system.