A card mining on the blue screen
Publish: 2021-04-05 23:03:38
1. There should be a conflict between hardware or between hardware and software. If the memory is loose, try changing the slot. Sometimes the virus will cause blue screen.
2. Currency exchange is a powerful blockchain platform in China. At present, the relatively large domestic exchange is OK huo'an exchange.
3. Is the driver of the graphics card inappropriate? My a-card has been used for nearly a year, and it hasn't been blue once
try to update the driver with the driver wizard.
try to update the driver with the driver wizard.
4. After the a card driver is updated, it leads to a blue screen. Try to uninstall the driver in safe mode, download the corresponding driver from Lenovo website, and try to install it again. There are still problems. It is recommended to go to the after-sales or computer repair shop for professional engineers to check
video card (graphics card), also known as display adapter, is the most basic configuration and one of the most important accessories of a computer
as an important part of the host computer, the graphics card is a device for digital to analog signal conversion, which undertakes the task of output display graphics
the graphics card is connected to the main board of the computer, which converts the digital signal of the computer into an analog signal for the display. At the same time, the graphics card still has the image processing ability, which can help the CPU work and improve the overall running speed.
video card (graphics card), also known as display adapter, is the most basic configuration and one of the most important accessories of a computer
as an important part of the host computer, the graphics card is a device for digital to analog signal conversion, which undertakes the task of output display graphics
the graphics card is connected to the main board of the computer, which converts the digital signal of the computer into an analog signal for the display. At the same time, the graphics card still has the image processing ability, which can help the CPU work and improve the overall running speed.
5. Maybe it's the problem of graphics card, virtual memory and so on. You'd better reload the machine, or you'd better change the computer, or you'd better change the monitor for the desktop
(ask other experts to answer the deep technical questions)
(ask other experts to answer the deep technical questions)
6. The following is a personal summary of the network operating system classification administrator, C Tangel. It's not a network replication, but a personal daily work experience and clear reasons. If you need to , please indicate the source
here are some typical causes of blue screen failures and solutions< This blue screen code has nothing to do with the hardware. It is caused by the conflict between the driver and the software. The first time we found this code was because there was a conflict between the USB keyboard of the company's Dell machine and the keyboard encryption program of QQ2007. Also in the IBM T series notebook installed driver error
if your machine has a blue screen, and this code is used every time, please think about whether you have updated any software or driver recently, uninstall it and take a look. In general, it can be solved. If you can't remember it and it's very frequent, you can't do it again< Second, 0x0000007b
this code has something to do with the hard disk, but don't be afraid. It's not bad. It's a setup problem or a hard disk boot partition error caused by a virus
if you have this problem when installing the system with the original system disk, it means that your machine configuration is relatively new. As an old system disk, you don't recognize such a new hard disk interface, so you have to enter BIOS to change the hard disk mode to ide compatible mode. Of course, now people use the ghost version of the operating system, the newer ghost disk does not have this problem
if your operating system has been used for a period of time, and suddenly this problem occurs one day, I'm sorry, it's caused by the virus. Press F8 to boot and select the last correct configuration. If it can't return to normal mode, please redo the system< Third, the failure is related to the hard disk. The system probability is relatively high, and the probability of the hard disk failure is relatively low. I have no less than 20 blue screen machines with this code, and only one of them is a hard disk. It's really bad. The rest is the volume out of the problem, repair can, this is one of the few blue screen code can be repaired
the repair method is to find the original system installation disk (or the golden finger V6 PE startup interface with console repair). Here we say to use the system disk method, put the system disk into the CD-ROM drive, start to the installation interface, and select r to enter the console for repair. After entering the console, the prompt C: &# 92 will appear; You can input CHKDSK - r here, and then it will automatically detect and repair the problem. After the repair is completed, restart the computer to enter the system. After entering the system, you'd better kill the virus first, and then restart it to try. If it's normal, then it's OK. If this code is still issued, it means that the hard disk has a problem and needs to be replaced, Or separate the problem areas into hidden areas, and use the space behind to install the system< Most of these two codes are caused by viruses, so you can kill them. If you can't enter the normal mode, you can press F8 to enter the safe mode. Of course, it may also be caused by memory. You can try to plug and unplug memory again. Generally, the probability of memory damage in this code is small< 5. The possibility of hardware failure and hard disk is very high. If this code is issued every time, first of all, change a hard disk to test whether the machine can start normally. If the hard disk is OK, try again the memory, if the memory has also been tried, change the CPU. In short, it must be a hardware failure< Sixth, coooo21a
C start fault, it reported the error is very evil, reported unknown hardware fault, but this kind of C start code mostly has nothing to do with the hardware. Basically, some drivers started at the same time with the system! Or service problems. For example, once I changed the f disk of a notebook to an e disk. As a result, this kind of code with the beginning of C appeared when I started it again. Finally, I found that if I inserted a U disk, it would start normally, because if I inserted a U disk, there would be f disk in the system. Then I found the hidden files, which were written by the system when I started it. I unplugged the U disk, and the problem reappeared. Later, I changed the e disk back to f disk, and the problem disappeared. I thought what software started together with the system was left in the f disk. If I didn't have it, I would build it myself. But if I didn't even have the f disk, I could only report an error, so I can see this kind of blue screen for comparison< 7. The blue screen code is different every time.
this kind of problem is basically caused by the hardware, especially when the memory is the first object to be suspected and the memory is replaced. The second possibility is that although the CPU doesn't like to break, I have encountered two problems since 2006. Other hardware basically won't cause the blue screen code to change casually< Eight, occasionally blue screen, and code flash over, restart the problem
there are two possibilities
1, take XP as an example, right-click on my computer, select properties, find the Advanced tab, find the following startup and troubleshooting items, and click Set. In the pop-up window, you can find three options in the middle "system failure". The third option will restart automatically. If this option is not checked, the blue screen will stop
2. The above settings have been made, but it will flash and restart. That is caused by the overheating of the graphics card or CPU. Open the chassis to check the status of the cooling fan and radiator
in addition, you can't see the blue screen when you start up, and then you can restart yourself. At this time, it is impossible to set the first step in the system, so you should press F8 when the machine starts up, select disable restart after startup failure, and if startup fails, the system will stop at the blue screen code, so that you can view the problem according to the blue screen code< 9. Other blue screen codes
refer to item 7. Generally, first confirm whether the system is a problem, and then test the hardware in the following order: first, the memory is the most likely, then the CPU, then the hard disk, and finally the graphics card.
here are some typical causes of blue screen failures and solutions< This blue screen code has nothing to do with the hardware. It is caused by the conflict between the driver and the software. The first time we found this code was because there was a conflict between the USB keyboard of the company's Dell machine and the keyboard encryption program of QQ2007. Also in the IBM T series notebook installed driver error
if your machine has a blue screen, and this code is used every time, please think about whether you have updated any software or driver recently, uninstall it and take a look. In general, it can be solved. If you can't remember it and it's very frequent, you can't do it again< Second, 0x0000007b
this code has something to do with the hard disk, but don't be afraid. It's not bad. It's a setup problem or a hard disk boot partition error caused by a virus
if you have this problem when installing the system with the original system disk, it means that your machine configuration is relatively new. As an old system disk, you don't recognize such a new hard disk interface, so you have to enter BIOS to change the hard disk mode to ide compatible mode. Of course, now people use the ghost version of the operating system, the newer ghost disk does not have this problem
if your operating system has been used for a period of time, and suddenly this problem occurs one day, I'm sorry, it's caused by the virus. Press F8 to boot and select the last correct configuration. If it can't return to normal mode, please redo the system< Third, the failure is related to the hard disk. The system probability is relatively high, and the probability of the hard disk failure is relatively low. I have no less than 20 blue screen machines with this code, and only one of them is a hard disk. It's really bad. The rest is the volume out of the problem, repair can, this is one of the few blue screen code can be repaired
the repair method is to find the original system installation disk (or the golden finger V6 PE startup interface with console repair). Here we say to use the system disk method, put the system disk into the CD-ROM drive, start to the installation interface, and select r to enter the console for repair. After entering the console, the prompt C: &# 92 will appear; You can input CHKDSK - r here, and then it will automatically detect and repair the problem. After the repair is completed, restart the computer to enter the system. After entering the system, you'd better kill the virus first, and then restart it to try. If it's normal, then it's OK. If this code is still issued, it means that the hard disk has a problem and needs to be replaced, Or separate the problem areas into hidden areas, and use the space behind to install the system< Most of these two codes are caused by viruses, so you can kill them. If you can't enter the normal mode, you can press F8 to enter the safe mode. Of course, it may also be caused by memory. You can try to plug and unplug memory again. Generally, the probability of memory damage in this code is small< 5. The possibility of hardware failure and hard disk is very high. If this code is issued every time, first of all, change a hard disk to test whether the machine can start normally. If the hard disk is OK, try again the memory, if the memory has also been tried, change the CPU. In short, it must be a hardware failure< Sixth, coooo21a
C start fault, it reported the error is very evil, reported unknown hardware fault, but this kind of C start code mostly has nothing to do with the hardware. Basically, some drivers started at the same time with the system! Or service problems. For example, once I changed the f disk of a notebook to an e disk. As a result, this kind of code with the beginning of C appeared when I started it again. Finally, I found that if I inserted a U disk, it would start normally, because if I inserted a U disk, there would be f disk in the system. Then I found the hidden files, which were written by the system when I started it. I unplugged the U disk, and the problem reappeared. Later, I changed the e disk back to f disk, and the problem disappeared. I thought what software started together with the system was left in the f disk. If I didn't have it, I would build it myself. But if I didn't even have the f disk, I could only report an error, so I can see this kind of blue screen for comparison< 7. The blue screen code is different every time.
this kind of problem is basically caused by the hardware, especially when the memory is the first object to be suspected and the memory is replaced. The second possibility is that although the CPU doesn't like to break, I have encountered two problems since 2006. Other hardware basically won't cause the blue screen code to change casually< Eight, occasionally blue screen, and code flash over, restart the problem
there are two possibilities
1, take XP as an example, right-click on my computer, select properties, find the Advanced tab, find the following startup and troubleshooting items, and click Set. In the pop-up window, you can find three options in the middle "system failure". The third option will restart automatically. If this option is not checked, the blue screen will stop
2. The above settings have been made, but it will flash and restart. That is caused by the overheating of the graphics card or CPU. Open the chassis to check the status of the cooling fan and radiator
in addition, you can't see the blue screen when you start up, and then you can restart yourself. At this time, it is impossible to set the first step in the system, so you should press F8 when the machine starts up, select disable restart after startup failure, and if startup fails, the system will stop at the blue screen code, so that you can view the problem according to the blue screen code< 9. Other blue screen codes
refer to item 7. Generally, first confirm whether the system is a problem, and then test the hardware in the following order: first, the memory is the most likely, then the CPU, then the hard disk, and finally the graphics card.
7. It is suggested that the system be refitted
8. Generally, the blue screen is caused by incorrect operation. The computer should not operate at full load, which is easy to cause the blue screen
1. Try to unload all the software, patches, plug-ins and drivers downloaded before the blue screen. If the driver is not suitable, you can download the driver wizard to upgrade the driver
2. If there is a Trojan horse on the computer, you can download win cleaning assistant, Jinshan guard and 360 first aid kit to check and kill the Trojan horse
3. Press F8 to leave the advanced option open. Select "last correct configuration" and press enter to restore or reload the system
4. If it is caused by hardware problems, or if the hardware is overclocking, discharge the BIOS battery (restore the BIOS factory default value), it is recommended to plug in and out the hardware such as the graphics card and memory, clean up the hygiene in the computer, and polish the golden finger of the graphics card and memory (test whether the hardware temperature is too high).
1. Try to unload all the software, patches, plug-ins and drivers downloaded before the blue screen. If the driver is not suitable, you can download the driver wizard to upgrade the driver
2. If there is a Trojan horse on the computer, you can download win cleaning assistant, Jinshan guard and 360 first aid kit to check and kill the Trojan horse
3. Press F8 to leave the advanced option open. Select "last correct configuration" and press enter to restore or reload the system
4. If it is caused by hardware problems, or if the hardware is overclocking, discharge the BIOS battery (restore the BIOS factory default value), it is recommended to plug in and out the hardware such as the graphics card and memory, clean up the hygiene in the computer, and polish the golden finger of the graphics card and memory (test whether the hardware temperature is too high).
9. A card cost-effective, the same level of N card than a card expensive hundreds of dollars, people in the computer city scare you want to ask you to buy n card.. There's nothing wrong with the a-card I've been using. Physical stores don't have to sell it. Go to Jingdong to buy it. I bought it cheap and good
Hot content