Sapphire mining
Publish: 2021-04-14 19:29:04
1. ASUS al series of rad RX 580 super frequency graphics card is equipped with 4GB gddr5 to provide better E-sports and 4K game experience
in super frequency mode, the core frequency provides excellent performance and game experience
equipped with silent fan blade design, it provides greater airflow and strong silence performance
the patented ip5x st-proof fan provides better st-proof effect and prolongs the service life of the fan
full board automation process technology and SAP II super alloy power supply design provide better quality and reliability
enjoy immersive virtual reality experience with VR friendly HDMI interface
GPU tweak II provides intuitive performance tuning function
* proct specifications may vary depending on the country or region. We sincerely suggest that you confirm the specifications of the procts currently sold with your local distributor or retailer.
in super frequency mode, the core frequency provides excellent performance and game experience
equipped with silent fan blade design, it provides greater airflow and strong silence performance
the patented ip5x st-proof fan provides better st-proof effect and prolongs the service life of the fan
full board automation process technology and SAP II super alloy power supply design provide better quality and reliability
enjoy immersive virtual reality experience with VR friendly HDMI interface
GPU tweak II provides intuitive performance tuning function
* proct specifications may vary depending on the country or region. We sincerely suggest that you confirm the specifications of the procts currently sold with your local distributor or retailer.
2.
I read too much news
for bitcoin mining configuration, the CPU requirements are extremely low, as low as those of the old computers ten years ago, the graphics card requirements are extremely high, and the higher the efficiency, but mining is the world of a card, and the N card is only half of the efficiency of a card, and the electricity charges can not be returned.
amd GPU can be realized by a single hardware instruction, while NVIDIA GPU needs three hardware instructions to simulate, This one alone brings amd GPU an additional 1.7 times of computing efficiency advantage
1 bit = 700 yuan
3. The main specifications and parameters of the two motherboards are exactly the same, the only difference is the video output interface, that is, the interface between the output core video card signal and the display, the VGA + HDMI interface at the end of VH; And VD is VGA + DVI interface
just choose the interface behind the main display. If it's HDMI, choose VH. If it's DVI, choose VD. If it's only VGA, or if the building owner doesn't use the integrated graphics card (check display) but uses the independent graphics card, it's the same.
just choose the interface behind the main display. If it's HDMI, choose VH. If it's DVI, choose VD. If it's only VGA, or if the building owner doesn't use the integrated graphics card (check display) but uses the independent graphics card, it's the same.
4. Now there should be something wrong with the hardware. It doesn't start properly at all
it is recommended to change the memory. If there is a check display, try to use the check display after dialing the independent graphics card. Not yet, we can only replace the CPU motherboard for these hardware tests.
it is recommended to change the memory. If there is a check display, try to use the check display after dialing the independent graphics card. Not yet, we can only replace the CPU motherboard for these hardware tests.
5. 1、 The probability of explosion
it's just the most concerned problem of gem dealers, but there is no final conclusion at present. I sorted out my own data and compared them with Wowhead's data. Basically, we have a clear understanding of the probability of procing sapphire by blasting
first of all, Blizard adjusted the probability of ore blasting. Before patch2.1x, it was 2.5% sapphire, and there was a certain probability of emerald. After patch 2.1X, one emerald will be proced at 100%, possibly two It's estimated that few people are interested in emerald, so we won't discuss it here), and then the chance of procing sapphire is increased. So far, I haven't found accurate official data on how much it has been raised. No relevant data can be found in forum.worldofwarcraft.com. Most people will mention the 3% probability in Wowhead. For the time being, we think that this 3% is the correct probability to calculate the probability of a group of minerals procing a sapphire. I'll add a discussion on this probability later
if you blow up a mine, the probability of each sapphire is 3%, and the probability of procing a sapphire is 18% If there is any doubt about this, I don't want to explain it more. People who understand naturally know, and those who don't understand are hard to explain. In short, from a programming point of view, it is to select a random number to see which range it is in.)
however, people are more concerned about how many sapphires can be proced from a group of mines, because the cost and profit can be calculated more clearly
then the following is the calculation process
a group of mines can be blasted four times, one may not come out, and four may come out
the probability of not procing one: (1-18%) ^ 4 = 45.212%
the probability of procing one: (1-18%) ^ 3 * 18% * 4 = 39.698%
the probability of procing two: (1-18%) ^ 2 * 18% ^ 2 * 6 = 13.071%
the probability of procing three: (1-18%) * 18% ^ 3 * 4 = 1.913%
the probability of procing four: 18% ^ 4 = 0.105%
such a group of mines can proce
0 * 45.212% + 1 * 39.698% + 2 * 13.071% + 3 * 1.913% + 4 * 0 105% = 0.72000 mines
in short, a group of minerals can proce 18% * 4 = 72% minerals. It's that simple. When the original probability was 2.5%, the probability of procing a gem was 2.5% * 6 * 4 = 60%. A group of mines proced a gem
it was once said that starting from probability, it is not 60%, but 1 - (1-15%) ^ 4 = 47.8%, which is totally one-sided
he only answered, "what's the probability of at least one mine coming out of a group of mines?", There was no answer to "how many gems can a group of mines proce on average."< Second, the discussion of 3% sapphire
because the data in Wowhead shows that it is 3%, people generally accept the 3% probability. But one thing to note is that the data in Wowhead includes the data before patch 2.1X, which is 2.5%. So I suspect that the probability of procing sapphire is higher than 3%. Mixed with the previous data of 2.5%, we have an average of 3%
here are the statistics of Wowhead
Aquamarine ---- 8353--3.28%
limonite ---- 8050--3.16%
Yemu stone ---- 7691--3.02%
Elune star 7735--3.03%
Obsidian ---- 7805--3.06%
Topaz ---- 8046--3.16%
total 47680
63733 groups of minerals
average group of sapphire The probability is 47680 / 63733 = 74.8%. Here is my record of blasting 370 mines All data are after 2.1 x modification rate)
Shuiyu --- 66 ------ 4.46%
Liming stone --- 46 ------ 3.11%
Yemu stone --- 50 ------ 3.38%
Elune star 56 ------ 3.78%
Obsidian --- 56 ------ 3.78%
Topaz --- 56 ------ 3.78%
total 330
average group of sapphire 330 / 3 70 = 89.19%
so according to my conjecture, the probability of gem proction should be 3.5%. The probability of sapphire proction from such a group of mines is
3.5% * 6 * 4 = 84%. I think this number is reasonable, which is also in line with my usual experience of ore blasting
of course, my own sampling data is not big enough, there may be some deviation. So if you are willing to make a conservative estimation, then my conclusion is that 72% of sapphire is proced from a group of minerals. Personally, I prefer 84%. You can also estimate that it is between 72% and 84%, which is consistent with the experience of most people. If Blizard publishes the official probability of procing sapphire in the future, it can easily calculate how many sapphires each group can proce according to my formula<
three miners, blasters, jewelers
another topic that everyone is very concerned about is,
miners --- how much is suitable for me to sell mine
ore blaster: how much is the right price for ore collection
jeweler: how much is the right price to collect the ore
you will understand after reading my introction below. I know that when the following things come out, some people will be happy and some people will be angry, but there is no way
suppose you have 250 groups of mines, then you can blast 1000 times. If you calculate by 3% average, Each gemstone has 30 pieces
--- 250 groups of ore --- unit price of raw stone --- price after cutting
Shuiyu -------- 30 ------ 12g ------ 19g
Liming stone -------- 30 ------ 30g ------ 45g
Yemu stone -------- 30 ------ 40g ------ 50g
Elune Star -------- 30 ------ 45g ------ 59G
Obsidian Stone -------- 30 ------ 45g ------ 59G
Topaz -------- 30--- ---40g ------ 55g
--- total profit ------ 6360g ------ 8610g
--- cost of each group of ore ------ 25.44g ------ 34.44g
so the conclusion is that if you sell raw ore by blasting, according to the above unit price of raw stone, you can eat below 25.44g for each group, and then keep balance. If you are buying ore, blasting ore and then cutting and selling, according to the above price of finished gems, you can eat at a price below 34.44g to keep balance. Of course, the gem price of each server varies greatly. You just need to input the price of your own server into the list above, and then simply calculate it yourself. Of course, this is calculated according to the 3% chance of gem proction.
it's just the most concerned problem of gem dealers, but there is no final conclusion at present. I sorted out my own data and compared them with Wowhead's data. Basically, we have a clear understanding of the probability of procing sapphire by blasting
first of all, Blizard adjusted the probability of ore blasting. Before patch2.1x, it was 2.5% sapphire, and there was a certain probability of emerald. After patch 2.1X, one emerald will be proced at 100%, possibly two It's estimated that few people are interested in emerald, so we won't discuss it here), and then the chance of procing sapphire is increased. So far, I haven't found accurate official data on how much it has been raised. No relevant data can be found in forum.worldofwarcraft.com. Most people will mention the 3% probability in Wowhead. For the time being, we think that this 3% is the correct probability to calculate the probability of a group of minerals procing a sapphire. I'll add a discussion on this probability later
if you blow up a mine, the probability of each sapphire is 3%, and the probability of procing a sapphire is 18% If there is any doubt about this, I don't want to explain it more. People who understand naturally know, and those who don't understand are hard to explain. In short, from a programming point of view, it is to select a random number to see which range it is in.)
however, people are more concerned about how many sapphires can be proced from a group of mines, because the cost and profit can be calculated more clearly
then the following is the calculation process
a group of mines can be blasted four times, one may not come out, and four may come out
the probability of not procing one: (1-18%) ^ 4 = 45.212%
the probability of procing one: (1-18%) ^ 3 * 18% * 4 = 39.698%
the probability of procing two: (1-18%) ^ 2 * 18% ^ 2 * 6 = 13.071%
the probability of procing three: (1-18%) * 18% ^ 3 * 4 = 1.913%
the probability of procing four: 18% ^ 4 = 0.105%
such a group of mines can proce
0 * 45.212% + 1 * 39.698% + 2 * 13.071% + 3 * 1.913% + 4 * 0 105% = 0.72000 mines
in short, a group of minerals can proce 18% * 4 = 72% minerals. It's that simple. When the original probability was 2.5%, the probability of procing a gem was 2.5% * 6 * 4 = 60%. A group of mines proced a gem
it was once said that starting from probability, it is not 60%, but 1 - (1-15%) ^ 4 = 47.8%, which is totally one-sided
he only answered, "what's the probability of at least one mine coming out of a group of mines?", There was no answer to "how many gems can a group of mines proce on average."< Second, the discussion of 3% sapphire
because the data in Wowhead shows that it is 3%, people generally accept the 3% probability. But one thing to note is that the data in Wowhead includes the data before patch 2.1X, which is 2.5%. So I suspect that the probability of procing sapphire is higher than 3%. Mixed with the previous data of 2.5%, we have an average of 3%
here are the statistics of Wowhead
Aquamarine ---- 8353--3.28%
limonite ---- 8050--3.16%
Yemu stone ---- 7691--3.02%
Elune star 7735--3.03%
Obsidian ---- 7805--3.06%
Topaz ---- 8046--3.16%
total 47680
63733 groups of minerals
average group of sapphire The probability is 47680 / 63733 = 74.8%. Here is my record of blasting 370 mines All data are after 2.1 x modification rate)
Shuiyu --- 66 ------ 4.46%
Liming stone --- 46 ------ 3.11%
Yemu stone --- 50 ------ 3.38%
Elune star 56 ------ 3.78%
Obsidian --- 56 ------ 3.78%
Topaz --- 56 ------ 3.78%
total 330
average group of sapphire 330 / 3 70 = 89.19%
so according to my conjecture, the probability of gem proction should be 3.5%. The probability of sapphire proction from such a group of mines is
3.5% * 6 * 4 = 84%. I think this number is reasonable, which is also in line with my usual experience of ore blasting
of course, my own sampling data is not big enough, there may be some deviation. So if you are willing to make a conservative estimation, then my conclusion is that 72% of sapphire is proced from a group of minerals. Personally, I prefer 84%. You can also estimate that it is between 72% and 84%, which is consistent with the experience of most people. If Blizard publishes the official probability of procing sapphire in the future, it can easily calculate how many sapphires each group can proce according to my formula<
three miners, blasters, jewelers
another topic that everyone is very concerned about is,
miners --- how much is suitable for me to sell mine
ore blaster: how much is the right price for ore collection
jeweler: how much is the right price to collect the ore
you will understand after reading my introction below. I know that when the following things come out, some people will be happy and some people will be angry, but there is no way
suppose you have 250 groups of mines, then you can blast 1000 times. If you calculate by 3% average, Each gemstone has 30 pieces
--- 250 groups of ore --- unit price of raw stone --- price after cutting
Shuiyu -------- 30 ------ 12g ------ 19g
Liming stone -------- 30 ------ 30g ------ 45g
Yemu stone -------- 30 ------ 40g ------ 50g
Elune Star -------- 30 ------ 45g ------ 59G
Obsidian Stone -------- 30 ------ 45g ------ 59G
Topaz -------- 30--- ---40g ------ 55g
--- total profit ------ 6360g ------ 8610g
--- cost of each group of ore ------ 25.44g ------ 34.44g
so the conclusion is that if you sell raw ore by blasting, according to the above unit price of raw stone, you can eat below 25.44g for each group, and then keep balance. If you are buying ore, blasting ore and then cutting and selling, according to the above price of finished gems, you can eat at a price below 34.44g to keep balance. Of course, the gem price of each server varies greatly. You just need to input the price of your own server into the list above, and then simply calculate it yourself. Of course, this is calculated according to the 3% chance of gem proction.
6. 9 hours 763.8km
route: Er Guang Expressway and Xu Guang Expressway
charge about 1405 yuan
Lianyuan East
from Lianyuan East toll station to Lianyuan East Interchange, drive 130m
keep right ahead, enter Lianyuan East Interchange, drive 560m
please go straight ahead, enter Er Guang expressway, drive 381.9km
keep right ahead, from Er Guang Expressway to Shunde Avenue, Drive 2.4km
turn right, enter Shunde Avenue, drive 630m
turn left rear, enter Tuanjie Avenue, drive 2.4km
please go straight ahead, enter G323, drive 2.0KM
drive right ahead, enter Longkou bridge, drive 220m
please go straight ahead, enter Xuguang expressway, drive 193.4km
drive right ahead, enter Shiling interchange, Drive 1.2km
please go straight, enter the Pearl River Delta Ring Expressway, drive 18.8km
keep left ahead, enter Huashan North interchange, drive 2.2km
please go straight, enter Daguang Expressway, drive 12.9km
keep right ahead, enter Yanghe interchange, drive 780m
please go straight, enter Guangzhou North Third Ring Expressway, drive 44.7km
please go straight, Enter the Pearl River Delta loop expressway, drive 1.0KM
keep right ahead, enter Shitan interchange, drive 990m
please go straight ahead, enter Ji Guang expressway, drive 42.5km
keep right ahead, enter BOLUO interchange, drive 1.3km
please go straight ahead, enter Renshen expressway, drive 1.1km
please go straight ahead, enter Wushen expressway, Drive 23.2km
to the front right, enter the lilinxi interchange, drive 1.0KM
please go straight, enter HuiGuan expressway, drive 10.4km
drive to the front right, enter Zhenlong interchange, drive 980m
please go straight, enter Changshen expressway, drive 13.0km
drive to the front right, from Changshen Expressway to S358, drive 1.6km
turn left, Enter S358, drive 2.5km
Jinfeng toll station
route: Er Guang Expressway and Xu Guang Expressway
charge about 1405 yuan
Lianyuan East
from Lianyuan East toll station to Lianyuan East Interchange, drive 130m
keep right ahead, enter Lianyuan East Interchange, drive 560m
please go straight ahead, enter Er Guang expressway, drive 381.9km
keep right ahead, from Er Guang Expressway to Shunde Avenue, Drive 2.4km
turn right, enter Shunde Avenue, drive 630m
turn left rear, enter Tuanjie Avenue, drive 2.4km
please go straight ahead, enter G323, drive 2.0KM
drive right ahead, enter Longkou bridge, drive 220m
please go straight ahead, enter Xuguang expressway, drive 193.4km
drive right ahead, enter Shiling interchange, Drive 1.2km
please go straight, enter the Pearl River Delta Ring Expressway, drive 18.8km
keep left ahead, enter Huashan North interchange, drive 2.2km
please go straight, enter Daguang Expressway, drive 12.9km
keep right ahead, enter Yanghe interchange, drive 780m
please go straight, enter Guangzhou North Third Ring Expressway, drive 44.7km
please go straight, Enter the Pearl River Delta loop expressway, drive 1.0KM
keep right ahead, enter Shitan interchange, drive 990m
please go straight ahead, enter Ji Guang expressway, drive 42.5km
keep right ahead, enter BOLUO interchange, drive 1.3km
please go straight ahead, enter Renshen expressway, drive 1.1km
please go straight ahead, enter Wushen expressway, Drive 23.2km
to the front right, enter the lilinxi interchange, drive 1.0KM
please go straight, enter HuiGuan expressway, drive 10.4km
drive to the front right, enter Zhenlong interchange, drive 980m
please go straight, enter Changshen expressway, drive 13.0km
drive to the front right, from Changshen Expressway to S358, drive 1.6km
turn left, Enter S358, drive 2.5km
Jinfeng toll station
7. It depends on the benefits of both. If you often work with the replica, you can consider doing engineering and mining, because the replica equipment is not much worse than the equipment made by leather making, and it's just DKP. For leather making, you have to make your own materials, so it takes a lot of G, and the good drawings are all dropped from the replica, so it's better to take the replica equipment directly. Unless you want to make the leather making drawings for the hunters in SW, but the drawings are expensive. Unless you brush the monsters yourself and have good luck, and you have the drawings you want to make, you can consider making the leather making equipment on the premise that you have complete materials, but I think it's worth making clothes. If you have more activities with the ngeon, it's better to install the ngeon. Although the drawing of SW is 154, the egghand is 164, and the clothing and armor of Muru is 151. In addition, the current version of Hunter begins to build armor, so unless you want to be the leather hand of the thief (you don't have to do it if you have egghand). So I think it's good for you to build a project. As long as you often follow the activities, you don't have to worry about the equipment. It depends on how you decide. I hope it will help you.
8. Common minerals: common ore, copper
Layer 1 of Shanlin mine: iron (green), olivine (green), agate (blue), sapphire (blue), diamond (golden yellow), Mitsui (red)
Layer 3 of Shanlin mine: silver (green), Amethyst (green), Yingshi (blue), jadeite (blue), pink diamond (golden yellow), and Diamond (red)
5 levels of mountain forest: gold (green), Moonstone (green), topaz (blue), Ruby (blue), anddeman (golden yellow), emerald (red).
Layer 1 of Shanlin mine: iron (green), olivine (green), agate (blue), sapphire (blue), diamond (golden yellow), Mitsui (red)
Layer 3 of Shanlin mine: silver (green), Amethyst (green), Yingshi (blue), jadeite (blue), pink diamond (golden yellow), and Diamond (red)
5 levels of mountain forest: gold (green), Moonstone (green), topaz (blue), Ruby (blue), anddeman (golden yellow), emerald (red).
9. There is a chance to get sapphires when mining
or when opening the box
there are 3 or 5 sapphires in the box
which can synthesize gems with attributes
and 10 GEMS when you are in the fairyland of Lingtai district
or when opening the box
there are 3 or 5 sapphires in the box
which can synthesize gems with attributes
and 10 GEMS when you are in the fairyland of Lingtai district
10. Hehe, this ruby vein belongs to a rare vein, which is not easy to dig. I have a link to the distribution of rare veins. You can check it. If you are digging copper mine, you can go to the field mine of Longyin village to mine marble http://www.leeuu.com/rc/news.htm?type=exp&id=08091602
Hot content