Feixun K3 mining
The three routers are different in flash memory, chip and function. In terms of flash memory, A1 adopts MXIC flash memory (which can be swiped freely), and the other two versions are Samsung flash memory (which needs to be used with USB flash disk after swiping in Merlin firmware); In terms of chips, A1 and A2 are MTK chips, while D is Broadcom chip; In terms of function, D1 has more mining functions than A1 and A2. The following is a detailed introction:
1. The difference of flash memory is that A1 uses MXIC flash memory and can freely use Merlin openwrt and other firmware. The other two versions use Samsung flash memory. After brushing Merlin firmware, you need to cooperate with U disk to use software center
Compared with A1, A2 lacks the back heat dissipation design, the internal CPU shield has shrunk, the display version has been changed, and the internal connector has been changed from copper to steel. D1 and A2 use basically the same material, but the workmanship is better, avoiding the problem of oil leakage3. Chip difference: A1 and A2 are MTK chips. A2 is a little smaller than A1, but the firmware is universal. D is Broadcom chip. Its wireless performance is slightly better than A1 and A2, but its power consumption is about twice that of A1 and A2
Compared with A1 and A2, Feixun k3d1 has more mining functionsHardware:
k3c processor is China's first router based on Intel home Wi Fi chipset. Intel grx350 chipset supports 802.11ac R2, Bluetooth 5.0, USB 3.1gen. 2 10Gbps and other ultra-high specifications, with built-in hardware network acceleration mole, which has Intel's quality assurance
k3c is equipped with 6 high gain built-in PCB array antennas. After careful adjustment, compared with the mainstream configuration of 3 and 4 antennas in the market, it can more effectively eliminate the signal blind area
in terms of memory parameters, k3c is equipped with 256MB DDR3 1600ram and 128MB NAND high-speed flash ROM
K3
adopts Broadcom bcm4709 al core processor, and the main frequency reaches 1.4GHz. Equipped with 512M memory, 128M flash memory, can connect nearly 100 devices, has a strong data processing capacity. The speed of 2.4GHz can reach 1000Mbps, and that of 5GHz can reach 2167mbps. The speed of both frequency bands can reach Gigabit level, which is the leading level in the instry
handle:
as soon as k3c gets it, the first feeling is that it is lighter than K3, which should be e to different configurations. The second is that there is a light at the network cable interface. Then the packaging box and the power adapter are different. The power adapter doesn't feel as convenient as K3 and can't be folded. Actually, there is no difference between K3 and K3. I can't feel it.
the al band router uses 5g band in addition to 2.4G band
the two frequency bands do not interfere with each other, and the user can choose them. Compared with the single frequency router, the performance of the al frequency router is more stable
just like the one-way road has been transformed into two-way diversion, K1 supports the latest 5g band, which makes data transmission more efficient, reces data congestion and network delay, and makes voice, video, online on demand and online games more fluent
at the same time, the four antennas are not just for the sake of being handsome. As a al band Gigabit wireless router, K1 adopts intelligent four antennas and applies a new generation of MIMO technology, which makes the signal more stable, the data transmission more efficient and the signal coverage wider
in this way, there will be no network dead space at home. You can roam on the Internet everywhere, get fresh information and play new games.
we should be cautious
it's OK to buy one for fun, but you need to be careful when you buy a lot of them.