N-card mining blue screen
Publish: 2021-04-17 15:59:22
1. There should be a conflict between hardware or between hardware and software. If the memory is loose, try changing the slot. Sometimes the virus will cause blue screen.
2. You're kidding. You use n-card to mine, usually a-card to mine. The computing power is different. The mining speed of a-card is much faster. Haven't you started it,
3. Pay attention to make a good backup
then if you can enter the system, there is a tool to refresh the BIOS on the windows desktop, so you don't need to enter DOS
then if you can enter the system, there is a tool to refresh the BIOS on the windows desktop, so you don't need to enter DOS
4. If it is through software refresh, it is recommended that you use winflash software, enter winflash software, click "file" in the upper left corner, "start updating BIOS", and then find the BIOS file you downloaded, which is generally a file with the suffix BIM. After the refresh is completed, restart the computer and it will be successful
if you are refreshing in DOS mode, you need to make a DOS boot U disk. After entering the pure DOS mode, you can enter the name of the Refresh Tool + space + BIOS file name. The name of the refresh tool needs to be determined by the tool downloaded from the Internet
if you use the tools provided by the motherboard manufacturer, the process will be easier. ASUS gigastar and other manufacturers have designed their own BIOS update tools. Use the tools to locate the downloaded BIOS file, and then click OK to update the BIOS on the motherboard.
if you are refreshing in DOS mode, you need to make a DOS boot U disk. After entering the pure DOS mode, you can enter the name of the Refresh Tool + space + BIOS file name. The name of the refresh tool needs to be determined by the tool downloaded from the Internet
if you use the tools provided by the motherboard manufacturer, the process will be easier. ASUS gigastar and other manufacturers have designed their own BIOS update tools. Use the tools to locate the downloaded BIOS file, and then click OK to update the BIOS on the motherboard.
5. Ha ha, BIOS
if you want to brush it off, you need to take the computer apart. If you don't know much about computers, you'd better go to the computer city. BIOS is on the motherboard. If you want to turn off the power, take the BIOS off the motherboard and put it on a dry table for about 5 minutes, and then install it. That's it!
if you want to brush it off, you need to take the computer apart. If you don't know much about computers, you'd better go to the computer city. BIOS is on the motherboard. If you want to turn off the power, take the BIOS off the motherboard and put it on a dry table for about 5 minutes, and then install it. That's it!
6. Generally speaking!! To refresh the BIOS, you need to do these steps:
1. The model of the main board BIOS
2. There is no upgrade package for this type of BIOS that can be downloaded from the Internet
3. Prepare tool software, any one is OK! As long as it works, just a little bit
4. Follow your own BIOS refresh instructions! It'll be in place in a minute
you have successfully completed the operation of brushing BIOS!!
1. The model of the main board BIOS
2. There is no upgrade package for this type of BIOS that can be downloaded from the Internet
3. Prepare tool software, any one is OK! As long as it works, just a little bit
4. Follow your own BIOS refresh instructions! It'll be in place in a minute
you have successfully completed the operation of brushing BIOS!!
7. There are a lot of belt conveyor manufacturers, but the owners don't always lock in Xi'an. After all, belt conveyor belongs to large transport equipment. Try to find some manufacturers with good reputation, excellent quality and after-sales service. Zhengzhou Songyang coal machine is a good choice
8. The BIOS is stored in the ROM chip on the motherboard, which ensures the general availability of the BIOS and will not be damaged e to disk errors. The position of BIOS in the whole PC system determines its importance. Whether it works normally or not directly determines the life and death of the whole microcomputer system. According to incomplete statistics, 60% to 80% of the bad reasons of the motherboard are caused by the BIOS chip of the motherboard. Therefore, the normal work of the BIOS is particularly important! However, when upgrading BIOS to improve performance, there are often some unexpected things. In the process of upgrading, power failure, using the wrong upgrade file, incorrect version of the upgrade file, modification of the upgrade file (e.g. virus attack) and so on will cause no display ring the restart. Because of this, some motherboard manufacturers, such as ASUS series motherboard with i820 chipset, use a more user-friendly way to upgrade BIOS. In the new ASUS P3C series motherboard, it has a convenient live update function. When updating BIOS, you only need to put in the attached driver CD, and after selecting the option to update BIOS, you can download the latest version of BIOS automatically, And automatic update, to avoid the user's mistakes in the operation
my friend's computer is out of order. As soon as it is powered on for self checking, it stops and the prompt "FDD controller failure (80h)" appears. There is something wrong with the floppy drive setting. I first press del to enter the CMOS setting program. After carefully checking the setting, I found no problem. Is the floppy cable loose? I opened the case to see that the data cable and power cable behind the floppy drive are well connected, and the direction is not wrong. So will the failure come from the floppy drive? So I took down the floppy drive and the data cable and took it to another machine to have a try. There was no problem with the floppy drive. I replaced a new floppy drive and took it to this machine. The fault is still there
since then, I have blocked the error detection in CMOS and re installed Windows 98. As a result, either the PS / 2 mouse and moden can not be found, or a lot of messy yellow exclamation marks appear in the device manager. At this point, I began to suspect the motherboard. So I asked my friend what he had done before the computer broke down. He said that when he was surfing the Internet yesterday, he downloaded the BIOS program of the latest MVP4 motherboard and refreshed it with the aflash.exe program. At this time, all the problems are clear: the problem is manifested in the floppy drive and other peripherals, but the cause is BIOS
cause of failure: after refreshing the BIOS program of the motherboard, the floppy drive can't be used first, and then it can't enter windows. After barely entering windows, the mouse and serial port can't be used. In this way, it is not difficult for us to find that the fault of the whole machine is caused by refreshing the BIOS program. The brand of the motherboard of this machine is unknown. We only know that it uses via MVP4 chipset of Taiwan Weisheng company. The chip of Beiqiao is vt82c694x, and the chip of Nanqiao is vt82c686a. The EEPROM (electrically erasable programmable memory) of "sst29e01" is used to store the BIOS program, not our common flash ROM (flash memory). As we all know, there are only a few manufacturers in the world that proce chipsets for microcomputer motherboards, such as Intel, Ali, via and sis. Most motherboards proced by many motherboard manufacturers use chipsets proced by these manufacturers. Therefore, when we buy motherboards, we usually only care about the chipset type of motherboards. This is easy to cause us a misunderstanding, simply think that as long as the motherboard adopts the same chipset, then their BIOS programs must not be much different, thus ignoring another important device on the motherboard - I / O chip. Motherboards proced by different manufacturers not only have different manufacturing processes, but also adopt different I / O chips and electronic components. The BIOS chip on the motherboard stores all the hardware information of the motherboard, so the motherboards proced by different manufacturers use the same chipset, but their BIOS programs must not be universal. If the BIOS program of the motherboard of other manufacturers is used to refresh the motherboard, it is likely that the computer will be unable to control the hardware devices and I / O interface on the motherboard when the BIOS takes over the system after it is started. Now it can be concluded that the cause of this computer failure is e to the BIOS program of other manufacturers being used when upgrading the BIOS program
Troubleshooting: obviously, as long as the original BIOS program is written back, it can return to normal. But the careless friend not only did not back up the original BIOS program, but also lost the package and manual of the motherboard. At this time, had to go online to find the MVP4 motherboard BIOS program http://www.award.com.tw/download/bios Because it's too troublesome to use aflash.exe to write BIOS ROM after inserting it into the computer, I bought several 1-megabyte EPPROM and borrowed a ROM programmer. Then my friend and I wrote BIOS one by one and inserted it into the motherboard for trial. After we plug the No. 0087 BIOS into the BIOS socket, we turn on the computer and finally find the floppy drive. Under DOS, the mouse also returns to normal. Then we quickly format the C disk and reload Windows 98 and the driver. Everything returns to normal and the fault is solved
lessons learned: now many computer players often try to upgrade their motherboards or graphics cards with BIOS programs of some brand computers. On the surface, an inferior card becomes a famous motherboard or graphics card in a flash, but it is not only dangerous, but also more harmful than beneficial. The boards proced by different manufacturers not only have different manufacturing processes, but also adopt different interface IC and electronic devices, so the BIOS programs they provide are not universal. I advise computer players not to upgrade your motherboard or graphics card with BIOS programs from different manufacturers. Only the BIOS program provided by the original manufacturer can maximize the performance of the motherboard. When upgrading BIOS, it is safe to download software from the manufacturer's website or well-known driver website.
my friend's computer is out of order. As soon as it is powered on for self checking, it stops and the prompt "FDD controller failure (80h)" appears. There is something wrong with the floppy drive setting. I first press del to enter the CMOS setting program. After carefully checking the setting, I found no problem. Is the floppy cable loose? I opened the case to see that the data cable and power cable behind the floppy drive are well connected, and the direction is not wrong. So will the failure come from the floppy drive? So I took down the floppy drive and the data cable and took it to another machine to have a try. There was no problem with the floppy drive. I replaced a new floppy drive and took it to this machine. The fault is still there
since then, I have blocked the error detection in CMOS and re installed Windows 98. As a result, either the PS / 2 mouse and moden can not be found, or a lot of messy yellow exclamation marks appear in the device manager. At this point, I began to suspect the motherboard. So I asked my friend what he had done before the computer broke down. He said that when he was surfing the Internet yesterday, he downloaded the BIOS program of the latest MVP4 motherboard and refreshed it with the aflash.exe program. At this time, all the problems are clear: the problem is manifested in the floppy drive and other peripherals, but the cause is BIOS
cause of failure: after refreshing the BIOS program of the motherboard, the floppy drive can't be used first, and then it can't enter windows. After barely entering windows, the mouse and serial port can't be used. In this way, it is not difficult for us to find that the fault of the whole machine is caused by refreshing the BIOS program. The brand of the motherboard of this machine is unknown. We only know that it uses via MVP4 chipset of Taiwan Weisheng company. The chip of Beiqiao is vt82c694x, and the chip of Nanqiao is vt82c686a. The EEPROM (electrically erasable programmable memory) of "sst29e01" is used to store the BIOS program, not our common flash ROM (flash memory). As we all know, there are only a few manufacturers in the world that proce chipsets for microcomputer motherboards, such as Intel, Ali, via and sis. Most motherboards proced by many motherboard manufacturers use chipsets proced by these manufacturers. Therefore, when we buy motherboards, we usually only care about the chipset type of motherboards. This is easy to cause us a misunderstanding, simply think that as long as the motherboard adopts the same chipset, then their BIOS programs must not be much different, thus ignoring another important device on the motherboard - I / O chip. Motherboards proced by different manufacturers not only have different manufacturing processes, but also adopt different I / O chips and electronic components. The BIOS chip on the motherboard stores all the hardware information of the motherboard, so the motherboards proced by different manufacturers use the same chipset, but their BIOS programs must not be universal. If the BIOS program of the motherboard of other manufacturers is used to refresh the motherboard, it is likely that the computer will be unable to control the hardware devices and I / O interface on the motherboard when the BIOS takes over the system after it is started. Now it can be concluded that the cause of this computer failure is e to the BIOS program of other manufacturers being used when upgrading the BIOS program
Troubleshooting: obviously, as long as the original BIOS program is written back, it can return to normal. But the careless friend not only did not back up the original BIOS program, but also lost the package and manual of the motherboard. At this time, had to go online to find the MVP4 motherboard BIOS program http://www.award.com.tw/download/bios Because it's too troublesome to use aflash.exe to write BIOS ROM after inserting it into the computer, I bought several 1-megabyte EPPROM and borrowed a ROM programmer. Then my friend and I wrote BIOS one by one and inserted it into the motherboard for trial. After we plug the No. 0087 BIOS into the BIOS socket, we turn on the computer and finally find the floppy drive. Under DOS, the mouse also returns to normal. Then we quickly format the C disk and reload Windows 98 and the driver. Everything returns to normal and the fault is solved
lessons learned: now many computer players often try to upgrade their motherboards or graphics cards with BIOS programs of some brand computers. On the surface, an inferior card becomes a famous motherboard or graphics card in a flash, but it is not only dangerous, but also more harmful than beneficial. The boards proced by different manufacturers not only have different manufacturing processes, but also adopt different interface IC and electronic devices, so the BIOS programs they provide are not universal. I advise computer players not to upgrade your motherboard or graphics card with BIOS programs from different manufacturers. Only the BIOS program provided by the original manufacturer can maximize the performance of the motherboard. When upgrading BIOS, it is safe to download software from the manufacturer's website or well-known driver website.
9. Yangquan Coal Instry (Group) No.1 mine is located in Kuangkuang North Road, Yangquan City, Shanxi Province. It was completed and put into operation in 1956. It is one of the super large backbone proction mines of Yangquan Coal Instry (Group) Co., Ltd. The mine field covers an area of 83.6 square kilometers, with geological reserves of 1.06 billion tons. The recoverable reserves are 640 million tons. The design capacity of the mine is 2.4 million tons / year, the approved capacity is 2.9 million tons / year, and the main mining coal seams are 3, 12 and 15. The mine output has been maintained at more than 4 million tons for many years. It is the first modern mine and super quality standardized mine named by the former Ministry of coal, and has won the title of coal instry secondary enterprise and instry level high-yield and efficient mine
the mine has a mine type dense medium coal preparation plant with an annual washing capacity of 4.5 million tons. The main procts are large, medium and small pieces of carbon, pulverized clean coal 1, 2, 3, sintered coal, grade 16 fine coal and other 8 procts, of which grade 10 washing medium block is national quality proct, grade 12 washing large block is ministry quality proct, grade 11 washing small block and grade 16 fine coal are provincial quality proct. The proct won the national "Silver Award" and the "quality management award" granted by China Coal Quality Association. It is the first-class fuel for blast furnace smelting, ore sintering, thermal power generation and chemical combustion. The procts have passed ISO9000 certification and are sold all over the country. Some of them are exported to Japan, South Korea, Brazil and Malaysia
for a long time, the mine has been keeping pace with the times, following the group's development strategy of "paying equal attention to both coal and non coal", constantly promoting system innovation, management innovation and scientific and technological innovation, liberating proctivity by reform, activating proctivity by management, and promoting proctivity by science and technology, with high-yield and efficient independent operation and steady pace. As a high-quality asset, the mine has been incorporated into Shanxi Guoyang Xinneng Co., Ltd. and will rise again with the successful listing of Guoyang company
since 1994, it has maintained the title of provincial civilized unit for 10 consecutive years and the title of high yield and high efficiency mine for 9 consecutive years. In particular, since 1998, it has successively won the provincial third, second, first and special honors once. In 2001, the mining Party committee was awarded the honorary title of "national advanced grassroots party organization" by the Central Committee of the Communist Party of China. In 2002, it was awarded "national double civilization coal mine" and "double top ten coal mines of the whole mine" by China Coal Political Research Council and China Coal Instry Association respectively. In 2003, it was awarded "national double civilization coal mine" and "double top ten coal mines of the whole mine", He was awarded the honorary title of "national advanced unit of spiritual civilization construction" by the civilization Committee of the CPC Central Committee< The second coal mine of Yangquan Coal Instry (Group) Co., Ltd. is one of the super large backbone mines of Yangquan Coal Instry (Group) Co., Ltd. It is a national coal instry super quality standardized and modernized mine, and has won the golden stone award of excellent enterprise in coal instry. The second coal mine of Yangmei Group invested in the proction and operation assets of Shanxi Guoyang Xinneng Co., Ltd., which made the second coal mine rise with Guoyang, work for the shareholders and make great progress
62.4 square kilometers of minefield, 490 million tons of recoverable coal reserves, simple geological structure and stable coal seam are the unique resource occurrence conditions of No.2 coal mine; Shijiazhuang Taiyuan railway, 307 National Highway and Taijiu Expressway pass by empty space, adjacent to Yangquan City, which makes the two mines have convenient transportation area; After reconstruction and expansion, it will increase to 4.35 million tons of coal proction and washing processing capacity every year. The first-class modern equipment in China is the basic strength for the stable development of No.2 coal mine; High quality anthracite favored by customers at home and abroad, with complete varieties, high quality and considerate service, makes No.2 coal mine benefit from brand reputation; Scientific management, excellent high-quality talents and solid corporate culture are the source of strength for the sustainable development of No.2 coal mine
in the 50 years since its establishment in 1951, No.2 coal mine has proced 110 million tons of coal and paid 394 million yuan of profits and taxes. As the second coal mine under Guoyang Xinneng Co., Ltd., it will undertake the important task of pillars with more excellent performance and create a brilliant century< No.3 coal mine of Yangquan Coal Instry (Group) Co., Ltd.
No.3 coal mine of Yangquan Coal Instry (Group) Co., Ltd., which was founded in May 1950, has a mining history of 800 years and is a large coal mine with multiple wellhead. The main mining coal seams are 3, 12 and 15, with geological reserves of 170 million tons and recoverable reserves of 105 million tons. The approved proction capacity of the mine is 3 million tons, and the raw coal proction reached 4.582689 million tons in 1990. The net value of fixed assets of the whole mine is 178 million yuan. There are 8813 employees, including 6018 raw coal proction personnel
No.3 coal mine is famous for procing high-quality anthracite with high carbon content. Its main procts include 11 grade separation of large coal, 12 grade washing of medium coal, 12 grade washing of small coal, 15 grade and 16 grade separation of fine coal, etc. Among them, grade 15 and 16 fine coal has been continuously rated as provincial quality procts since 1984, and exported to Japan, South Korea, North Korea and other countries, which are well received by users< In 1988, No.3 coal mine was named as quality standardization and modernization mine by former China National Coal Corporation; In 1991, he was promoted to the second level enterprise of coal instry; National Coal Mine Geological union of Ministry of energy awarded & quot; Advanced unit of national unified allocation coal mine competition & quot;; In 1996, Ministry of coal instry awarded & quot; Coal quality management standardization mine Shanxi coal (Department) Bureau awarded & quot; Advanced unit of mechanical and electrical work& quot; National secondary measurement and total quality management secondary qualified enterprise & quot;; Shanxi Province won the excellent political work enterprises, advanced collective of Party style and discipline, advanced greening unit; And was awarded the former China National Coal Corporation Living welfare management and facilities standard advanced mine and other honorary titles< The predecessor of Tianxing company is No.4 coal mine of Yangquan Coal Group, which was founded in 1907. This century old coal mine was reorganized into Tianxing company after its resources were exhausted in 2002. Based on the development strategy of taking coal as the main body and taking mining electrical appliances and service instry as the two wings, the newly established enterprises have successively invested in Jincheng YEMA coal mine and built comprehensive hotels in Qinhuang< Yangquan No.5 coal mine is located in Pingding County, south of Yangquan City, 18 km away from the urban area in the north and 6 km away from Pingding County in the East. Taijiu Expressway and special railway line intersect each other and run through the middle of the mining area, with convenient communication and transportation, It is one of the large proction mines of Yangquan Coal Instry (Group) Co., Ltd., the largest anthracite proction base in China. The mine covers an area of 80.2 square kilometers, mainly mining 8 and 15 coal seams, with recoverable reserves of 463.11 million tons and service life of 84 years< Minmetals was officially established in December 1984. It has more than 6700 employees; Mining, digging, opening, machinery, transportation, communication, selection, marketing, supply and other types of work and professional, complete supporting, forming an independent proction system, the main types of coal proction are: pulverized clean coal, washing block, washing small, fine coal, slime, medium coal, etc., sold to more than 170 users in seven provinces and cities, mainly for metallurgy, power instry, and exported to Brazil, Japan, South Korea Australia and other countries and regions
- relying on technological progress, developing enterprises through science and technology. We will continue to increase investment in equipment and improve the degree of mechanization. From general mining and high-grade general mining at the beginning of mine construction to comprehensive mechanized mining in December of 1992, from fully mechanized mining by layers to fully mechanized top coal caving mining at one time, the degree of mining mechanization reached 100%; The computer-controlled KJ4 underground gas monitoring system and nuclear scale measurement system are established, and the three-dimensional seismic method is applied to predict the underground geological structure; The first intranet network established in the whole group company is starting, which improves the degree of informatization and paperless office
- diversified development as a supplement. While doing a good job in coal proction, Minmetals vigorously develops diversified economy and non coal instry. Duoying has grown from scratch, from small to large, and has been growing. At present, there are 10 business entities in the diversified operation head office, which are respectively engaged in more than 10 instries, such as construction and installation, mechanical and electrical maintenance, printing, processing, chemical instry, commercial drink, etc., with 1515 employees and an annual output value of nearly 50 million yuan
in the face of the favorable opportunity for China's accession to the WTO, Minmetals is ready to build a first-class mine in three years to beautify the environment, refine the management, optimize the procts and refine the work, so as to fight against the world with a new look. Looking forward to the future, the staff of Minmetals will have a bright future with bright red sun and blue sky
Xinjing mine is located in the west of Yangquan City, 18 kilometers away from the city center, close to Shijiazhuang Taiyuan railway and Taiyuan Jiujiang expressway. It started construction in 1990 with a total investment of 1.8 billion yuan. It was formally established on October 1, 1998, and now has 4500 employees. The coal seams in the mine field are all high quality anthracite with stable storage. There are 8 minable coal seams, mainly 3, 8 and 15 coal seams. The recoverable reserves of the first phase project is 160 million tons, the service life of the mining area is 52.4 years, and the annual design proction capacity is 2.2 million tons. According to the "Tenth Five Year" development plan, the mine output will reach more than 4 million tons by 2005< The main inclined shaft belt adopts CST Soft Start Technology of the United States, the main fan is GAF type made in Shanghai, which is the largest blower used by domestic coal enterprises at present. It also has the domestic advanced KJ90 coal mine safety proction monitoring system, and the auxiliary shaft hoist is also the most advanced equipment in China
Xinjing coal mine is the company's coal export base. The mine has a large-scale full dense medium coal preparation plant with an annual design of 3.6 million tons of raw coal. The main procts are special No.1, No.1 metallurgical blast furnace injection clean coal, the proct quality is excellent, marketable, mainly exported to South Korea and Japan
since the establishment of Xinjing mine, safety proction has been relatively stable, high yield and high efficiency has achieved remarkable results. All staff are adhering to the core concept of "road at the foot, things depend on people", forge ahead, work hard, build a high standard modern mine, and strive hard to achieve the company's strategic goal of "fighting hard, double ten billion in ten years"< Shouyang Kaiyuan Mining Co., Ltd. of Yangquan Coal Group was established in April 2000. It is a subsidiary of Yangquan Coal Instry (Group) Co., Ltd. It is an independent legal entity enjoying civil rights and bearing civil liabilities according to law, and is an enterprise owned by the whole people. The predecessor of Shouyang Kaiyuan Mining Co., Ltd. of Yangmei group is huangdangou coal mine in Shouyang County
the mine was founded in 1970 with a designed proction capacity of 300000 tons / year and an actual proction capacity of 150000 tons / year. On March 18, 2000, following the guiding principle of complementary advantages and common development, the mine was merged by Yangmei group free of charge with the consent of Yangmei group and Shouyang County Government. The newly established Shouyang Kaiyuan Mining Co., Ltd. of Yangmei group is located in the northwest corner of Qinshui coalfield, With an area of 27.5 square kilometers and geological reserves of 390 million tons, it contains 17 layers of coal, which are Carboniferous and Permian coal quality, coal types and main proct structure: 3 ᦇ, 9 ᦇ, 15 ᦇ, 15 ᦇ, 15 ᦇ, the main coal seams with stable occurrence and popular market. Among them, 3 coal and 9 coal are of good quality. They are very popular in the current market as ultra-low sulfur and ultra-low phosphorus lean coal. They are the main environmental protection coal advocated by the state. After the establishment of the company, the total investment of technical transformation construction determined by Yangmei group is 22.11 million yuan, including 104.5938 million yuan for mine technical transformation investment and 17.5167 million yuan for coal preparation plant technical transformation investment. After more than two years of construction, 111.6681 million yuan has been completed. Complete 92% of all technical transformation? In the first half of 2003, all technical transformation projects will be completed, and the design scale will reach 1.2 million tons in 2004. By then, the company will step into a modern high-yield and efficient mine.
the mine has a mine type dense medium coal preparation plant with an annual washing capacity of 4.5 million tons. The main procts are large, medium and small pieces of carbon, pulverized clean coal 1, 2, 3, sintered coal, grade 16 fine coal and other 8 procts, of which grade 10 washing medium block is national quality proct, grade 12 washing large block is ministry quality proct, grade 11 washing small block and grade 16 fine coal are provincial quality proct. The proct won the national "Silver Award" and the "quality management award" granted by China Coal Quality Association. It is the first-class fuel for blast furnace smelting, ore sintering, thermal power generation and chemical combustion. The procts have passed ISO9000 certification and are sold all over the country. Some of them are exported to Japan, South Korea, Brazil and Malaysia
for a long time, the mine has been keeping pace with the times, following the group's development strategy of "paying equal attention to both coal and non coal", constantly promoting system innovation, management innovation and scientific and technological innovation, liberating proctivity by reform, activating proctivity by management, and promoting proctivity by science and technology, with high-yield and efficient independent operation and steady pace. As a high-quality asset, the mine has been incorporated into Shanxi Guoyang Xinneng Co., Ltd. and will rise again with the successful listing of Guoyang company
since 1994, it has maintained the title of provincial civilized unit for 10 consecutive years and the title of high yield and high efficiency mine for 9 consecutive years. In particular, since 1998, it has successively won the provincial third, second, first and special honors once. In 2001, the mining Party committee was awarded the honorary title of "national advanced grassroots party organization" by the Central Committee of the Communist Party of China. In 2002, it was awarded "national double civilization coal mine" and "double top ten coal mines of the whole mine" by China Coal Political Research Council and China Coal Instry Association respectively. In 2003, it was awarded "national double civilization coal mine" and "double top ten coal mines of the whole mine", He was awarded the honorary title of "national advanced unit of spiritual civilization construction" by the civilization Committee of the CPC Central Committee< The second coal mine of Yangquan Coal Instry (Group) Co., Ltd. is one of the super large backbone mines of Yangquan Coal Instry (Group) Co., Ltd. It is a national coal instry super quality standardized and modernized mine, and has won the golden stone award of excellent enterprise in coal instry. The second coal mine of Yangmei Group invested in the proction and operation assets of Shanxi Guoyang Xinneng Co., Ltd., which made the second coal mine rise with Guoyang, work for the shareholders and make great progress
62.4 square kilometers of minefield, 490 million tons of recoverable coal reserves, simple geological structure and stable coal seam are the unique resource occurrence conditions of No.2 coal mine; Shijiazhuang Taiyuan railway, 307 National Highway and Taijiu Expressway pass by empty space, adjacent to Yangquan City, which makes the two mines have convenient transportation area; After reconstruction and expansion, it will increase to 4.35 million tons of coal proction and washing processing capacity every year. The first-class modern equipment in China is the basic strength for the stable development of No.2 coal mine; High quality anthracite favored by customers at home and abroad, with complete varieties, high quality and considerate service, makes No.2 coal mine benefit from brand reputation; Scientific management, excellent high-quality talents and solid corporate culture are the source of strength for the sustainable development of No.2 coal mine
in the 50 years since its establishment in 1951, No.2 coal mine has proced 110 million tons of coal and paid 394 million yuan of profits and taxes. As the second coal mine under Guoyang Xinneng Co., Ltd., it will undertake the important task of pillars with more excellent performance and create a brilliant century< No.3 coal mine of Yangquan Coal Instry (Group) Co., Ltd.
No.3 coal mine of Yangquan Coal Instry (Group) Co., Ltd., which was founded in May 1950, has a mining history of 800 years and is a large coal mine with multiple wellhead. The main mining coal seams are 3, 12 and 15, with geological reserves of 170 million tons and recoverable reserves of 105 million tons. The approved proction capacity of the mine is 3 million tons, and the raw coal proction reached 4.582689 million tons in 1990. The net value of fixed assets of the whole mine is 178 million yuan. There are 8813 employees, including 6018 raw coal proction personnel
No.3 coal mine is famous for procing high-quality anthracite with high carbon content. Its main procts include 11 grade separation of large coal, 12 grade washing of medium coal, 12 grade washing of small coal, 15 grade and 16 grade separation of fine coal, etc. Among them, grade 15 and 16 fine coal has been continuously rated as provincial quality procts since 1984, and exported to Japan, South Korea, North Korea and other countries, which are well received by users< In 1988, No.3 coal mine was named as quality standardization and modernization mine by former China National Coal Corporation; In 1991, he was promoted to the second level enterprise of coal instry; National Coal Mine Geological union of Ministry of energy awarded & quot; Advanced unit of national unified allocation coal mine competition & quot;; In 1996, Ministry of coal instry awarded & quot; Coal quality management standardization mine Shanxi coal (Department) Bureau awarded & quot; Advanced unit of mechanical and electrical work& quot; National secondary measurement and total quality management secondary qualified enterprise & quot;; Shanxi Province won the excellent political work enterprises, advanced collective of Party style and discipline, advanced greening unit; And was awarded the former China National Coal Corporation Living welfare management and facilities standard advanced mine and other honorary titles< The predecessor of Tianxing company is No.4 coal mine of Yangquan Coal Group, which was founded in 1907. This century old coal mine was reorganized into Tianxing company after its resources were exhausted in 2002. Based on the development strategy of taking coal as the main body and taking mining electrical appliances and service instry as the two wings, the newly established enterprises have successively invested in Jincheng YEMA coal mine and built comprehensive hotels in Qinhuang< Yangquan No.5 coal mine is located in Pingding County, south of Yangquan City, 18 km away from the urban area in the north and 6 km away from Pingding County in the East. Taijiu Expressway and special railway line intersect each other and run through the middle of the mining area, with convenient communication and transportation, It is one of the large proction mines of Yangquan Coal Instry (Group) Co., Ltd., the largest anthracite proction base in China. The mine covers an area of 80.2 square kilometers, mainly mining 8 and 15 coal seams, with recoverable reserves of 463.11 million tons and service life of 84 years< Minmetals was officially established in December 1984. It has more than 6700 employees; Mining, digging, opening, machinery, transportation, communication, selection, marketing, supply and other types of work and professional, complete supporting, forming an independent proction system, the main types of coal proction are: pulverized clean coal, washing block, washing small, fine coal, slime, medium coal, etc., sold to more than 170 users in seven provinces and cities, mainly for metallurgy, power instry, and exported to Brazil, Japan, South Korea Australia and other countries and regions
- relying on technological progress, developing enterprises through science and technology. We will continue to increase investment in equipment and improve the degree of mechanization. From general mining and high-grade general mining at the beginning of mine construction to comprehensive mechanized mining in December of 1992, from fully mechanized mining by layers to fully mechanized top coal caving mining at one time, the degree of mining mechanization reached 100%; The computer-controlled KJ4 underground gas monitoring system and nuclear scale measurement system are established, and the three-dimensional seismic method is applied to predict the underground geological structure; The first intranet network established in the whole group company is starting, which improves the degree of informatization and paperless office
- diversified development as a supplement. While doing a good job in coal proction, Minmetals vigorously develops diversified economy and non coal instry. Duoying has grown from scratch, from small to large, and has been growing. At present, there are 10 business entities in the diversified operation head office, which are respectively engaged in more than 10 instries, such as construction and installation, mechanical and electrical maintenance, printing, processing, chemical instry, commercial drink, etc., with 1515 employees and an annual output value of nearly 50 million yuan
in the face of the favorable opportunity for China's accession to the WTO, Minmetals is ready to build a first-class mine in three years to beautify the environment, refine the management, optimize the procts and refine the work, so as to fight against the world with a new look. Looking forward to the future, the staff of Minmetals will have a bright future with bright red sun and blue sky
Xinjing mine is located in the west of Yangquan City, 18 kilometers away from the city center, close to Shijiazhuang Taiyuan railway and Taiyuan Jiujiang expressway. It started construction in 1990 with a total investment of 1.8 billion yuan. It was formally established on October 1, 1998, and now has 4500 employees. The coal seams in the mine field are all high quality anthracite with stable storage. There are 8 minable coal seams, mainly 3, 8 and 15 coal seams. The recoverable reserves of the first phase project is 160 million tons, the service life of the mining area is 52.4 years, and the annual design proction capacity is 2.2 million tons. According to the "Tenth Five Year" development plan, the mine output will reach more than 4 million tons by 2005< The main inclined shaft belt adopts CST Soft Start Technology of the United States, the main fan is GAF type made in Shanghai, which is the largest blower used by domestic coal enterprises at present. It also has the domestic advanced KJ90 coal mine safety proction monitoring system, and the auxiliary shaft hoist is also the most advanced equipment in China
Xinjing coal mine is the company's coal export base. The mine has a large-scale full dense medium coal preparation plant with an annual design of 3.6 million tons of raw coal. The main procts are special No.1, No.1 metallurgical blast furnace injection clean coal, the proct quality is excellent, marketable, mainly exported to South Korea and Japan
since the establishment of Xinjing mine, safety proction has been relatively stable, high yield and high efficiency has achieved remarkable results. All staff are adhering to the core concept of "road at the foot, things depend on people", forge ahead, work hard, build a high standard modern mine, and strive hard to achieve the company's strategic goal of "fighting hard, double ten billion in ten years"< Shouyang Kaiyuan Mining Co., Ltd. of Yangquan Coal Group was established in April 2000. It is a subsidiary of Yangquan Coal Instry (Group) Co., Ltd. It is an independent legal entity enjoying civil rights and bearing civil liabilities according to law, and is an enterprise owned by the whole people. The predecessor of Shouyang Kaiyuan Mining Co., Ltd. of Yangmei group is huangdangou coal mine in Shouyang County
the mine was founded in 1970 with a designed proction capacity of 300000 tons / year and an actual proction capacity of 150000 tons / year. On March 18, 2000, following the guiding principle of complementary advantages and common development, the mine was merged by Yangmei group free of charge with the consent of Yangmei group and Shouyang County Government. The newly established Shouyang Kaiyuan Mining Co., Ltd. of Yangmei group is located in the northwest corner of Qinshui coalfield, With an area of 27.5 square kilometers and geological reserves of 390 million tons, it contains 17 layers of coal, which are Carboniferous and Permian coal quality, coal types and main proct structure: 3 ᦇ, 9 ᦇ, 15 ᦇ, 15 ᦇ, 15 ᦇ, the main coal seams with stable occurrence and popular market. Among them, 3 coal and 9 coal are of good quality. They are very popular in the current market as ultra-low sulfur and ultra-low phosphorus lean coal. They are the main environmental protection coal advocated by the state. After the establishment of the company, the total investment of technical transformation construction determined by Yangmei group is 22.11 million yuan, including 104.5938 million yuan for mine technical transformation investment and 17.5167 million yuan for coal preparation plant technical transformation investment. After more than two years of construction, 111.6681 million yuan has been completed. Complete 92% of all technical transformation? In the first half of 2003, all technical transformation projects will be completed, and the design scale will reach 1.2 million tons in 2004. By then, the company will step into a modern high-yield and efficient mine.
10. Captain Rahm (appointed in January 2011), vice captain Schweinsteiger (promoted from the third captain to the vice captain, appointed in January 2011), third captain Robben, Ribery and Neuer have all done it, not fixed, temporarily appointed by the head coach.
Hot content