Mining setup of Weixing Z170

1. This has nothing to do with the motherboard. MSI Z170 supports mining, but the most important thing in mining is the computing power of the independent graphics card. If the computing power of the independent graphics card is not good, even if the memory of the CPU motherboard is good, it is useless,

2.

MSI motherboard is similar, you first click the upper right corner of BIOS to switch the language to Chinese, and then look at the related projects in my picture. If you only adjust the frequency multiplication, you can adjust the frequency multiplication in the green frame of the figure. Here, you need to input numbers on the keyboard or press the plus minus sign to adjust the specific multiple

PS: remember to add a little, don't add dozens of times at a time

3. Two ways
one: press F11 to start the self-test process and select SSD as the boot item
2: boot into BIOS, boot from SSD. This motherboard supports graphical BIOS, has language settings, set to Chinese, it is easy to find.

4. Download the accurate model of the main board from the official website, and the corresponding proct manual is multilingual, including the Chinese part

5. In this case, the problem that the direction of the memory mole is not reversed and not tightly inserted should be ruled out; Secondly, check the memory capacity in the BIOS of the motherboard. Only if the correct memory capacity is identified in the BIOS of the motherboard, all normal capacities will be displayed in the operating system; Third, the memory can not be mixed, different frequencies and single and double-sided inconsistent memory plug together will be incompatible, only one of them can be identified

6. 1、 Use software to make CPU overclocking
use softfsb software, which is a CPU overclocking software. Through the way of software directly control the status of the main board clock generator, change the working frequency of the CPU in the process of work, to achieve the purpose of overclocking, "that is, to use", if encountering overclocking failure, just need to restart to recover< Second, through the main board BIOS overclocking CPU
boot up, press del key to enter the BIOS main menu, and then enter the "frequency / voltage control" option, where you can set the CPU's external frequency, frequency doubling, CPU voltage and other parameters, first to adjust the CPU's external frequency, use & quot on the keyboard; Up and down & quot; Press the key to move the cursor to "CPU clock", and then press enter to input the external frequency.

7. There is a one button overclocking, it will automatically adjust, they will not add voltage, I am the same as you motherboard, but also automatically adjust overclocking, enough is good, do not blindly toss

8. Turn off the power and plug in the memory again to ensure that the memory is in place and in good contact. You can use the rubber to clean the memory first

9. It doesn't mean that you can overclock if you buy Z170. If your CPU is a
6500
6700 without K, you can't overclock if you use this motherboard.

10. Overclocking requires the cooperation of processor / BIOS and other aspects. First of all, the processor system is better. If it's with K version, it's relatively simple. Press on the reliable radiator and directly double the frequency. If it can't be pulled up, try adding voltage; If it's a version without K, you may need to find an overclocking BIOS from a foreign forum, and then try to pull the external frequency. Remember, it's a try, a little bit upward. If you haven't done it, I suggest you try to be familiar with BIOS first. At least you should know what each BIOS item is for.