Feixun mining bandwidth

1. K2P, K3 and the current k3c have all been tested. My family has an attic, and the router, K2P and K3 placed downstairs can detect the signal in the corner of the attic, but the k3c is the best signal at present. It seems that the 6dp antenna is still a good signal guarantee. If the pursuit of signal effect, it must be k3c is the best, especially when 2.4G and 5g are used at the same time, k3c is the best, K3 is not practical. In my environment, K2P needs to open 5g to have good practical effect, k3c is completely competent. It's worth recommending!

2. Some of them are project driven, and they can really experience the process and implementation of the project in the learning process; After graation, students will have practical projects, which can meet the needs of enterprises.

3. Proction will be cut every four years, and the next one will be in 2020. Today is 12.5, the next half.

4. This K2 is a al band Gigabit wireless routing. Dual band has two wireless WiFi, one is the 2.4G of the general routing, and the other is the latest 5g. These two signals have one feature: 5g is faster and more stable in accessing the Internet, but the ability to penetrate the wall is very poor. The signal is not good at a distance. Nowadays, mobile phones generally have 5g wireless.

5. The higher the frequency of radio wave, the higher the bandwidth, but the worse the penetration, the smaller the corresponding transmission distance. The coexistence of the two frequencies is for the compatibility of device access. If it is not a public environment, it is recommended not to choose the coexistence mode.

6.

Feixun K2 is a Gigabit router, which needs to be connected with Gigabit cable. Gigabit network card is Gigabit. If you connect with 100m network card or 100m network cable, it will become 100m

fisun K2 is a al band router (2.4G: 300mbps, 5g: 867mbps) with a maximum transmission rate of 1200mbps, but its WAN port and LAN port support 100m at most, so even if your bandwidth is 200m, the router can only use 100m at most. But also need more than six types of network cable

The difference between 100m router and Gigabit router lies in the total amount of data transmission. For example, if only one computer is connected, a 100 megabyte router can transmit 100 megabytes of data per second, while a Gigabit router can transmit 1000 megabytes of data per second. If there are two, 100 trillion is only 50 trillion, and 1000 trillion is 500 trillion. The actual amount of data transmitted is determined by the network. Except for optical fiber, indivials generally do not reach the total amount of transmission of routers

extended data

a high-performance router with system throughput of thousands of megabits per second or higher, from the external point of view, its function is actually consistent with that of the traditional router, and the most important feature is high speed

The demand of Internet for high bandwidth and quality of service, together with the development of network processor technology and transmission technology, leads to the concept of Gigabit line speed router and proces practical procts

7. Yes, there are in bandwidth control

8.

K2 is a Gigabit router, which needs to be connected with a Gigabit cable. A gigabit network card is a gigabit network card. A gigabit network card or a gigabit network cable will become a gigabit network card

fisun K2 is a al band router (2.4G: 300mbps, 5g: 867mbps) with a maximum transmission rate of 1200mbps, but its WAN port and LAN port support 100m at most, so even if your bandwidth is 200m, the router can only use 100m at most. But also need more than six types of network cable< br />

9.

1. Look through the name plate or manual at the bottom of the router to find the router IP, default account and password

2. Open IE browser, input router IP and press enter, such as 192.168.1.1. If not, it means that the IP has been modified and the router needs to be restored to the factory settings. Just press the reset button of the router for a long time, and the indicator lights will all go out, and then light up again, which means that the factory settings have been restored successfully

3. Enter the login interface of the router, input the default account and password, if not, restore the router to the factory settings

7. Click Save

10.

Fairchild K2 is a Gigabit router

a Gigabit router is a high-performance router whose system throughput is several thousand megabits per second or higher. The maximum wireless transmission rate of fisun K2 is 1200mbps, 2.4GHz: 300mbps, 5g: 867mbps. So fisun K2 is a Gigabit router

{rrrrrrr}

extended data

Gigabit router classification:

Proct Name: Netgear r6300

Proct Type: enterprise wireless router

maximum transmission rate: 1300mbps

network standard: wireless standard: IEEE 802.11n, IEEE 802.11g IEEE 802.11b

network interface: 1 10 / 100 / 1000Mbps WAN port, 4 10 / 100 / 1000Mbps LAN ports

frequency range: al band (2.4GHz, 5GHz)

WPS function: support WPS one key encryption function

QoS Support: support

firewall function: built-in firewall

antenna type: built-in antenna