How does MTC mine

1. It's exciting..

2. The above written K1 G1 K2 G2 G - indicates triggering, K - indicates two wire connection of anode, two wire connection of anode triggers, and there is writing on the wiring slot. Yueqing Aiwei electric

3. I don't know what kind of equipment you want to use. It's generally recommended to use imported wear-resistant steel plates, but domestic ones are not rable. The Japanese JFE and dillir450v used for mine cars are bought by French steel, which is guaranteed to be twice as rable as the domestic ones..

4. Etc lane and MTC lane are two independent systems. When etc lane changes to MTC lane, it is necessary to exit the ETC system, lift the high-speed rail, and then turn on the MTC lane system, such as lowering the rail, swiping the card to work, and charging normally

5. Give the etc card to the toll collector and let him brush it, then you will know how much money you need to make up!

6. You'd better go to MTC company for information.
I've tried it.
MTC's cat link notebook is very fast,
but you can't access the Internet with your mobile phone.
but beeline's card can access the Internet with your mobile phone without setting

7. Mettler Toledo pH has two modes: MTC and ATC. If the electrode is equipped with a temperature probe, it will automatically switch to ATC mode< Br > < br > technical parameters of METTLER TOLEDO pH meter < br > < br > 1. Measurement range: pH 0.00 ~ 14.00- 1999~1999mV 0 ~ 100 ℃ < br > 2. Resolution: 0.01ph; 1mV 1 ℃ < br > 3. Power supply: 220 V / 50 Hz, 9 V / DC < br > 4. Size / weight: 200 × one hundred and seventy-five × 52mm / 0.6kg < br > 5; Relative humidity: 5% ~ 80% < br > < br > operating proceres < br > < br > 1. Buffer solution group < br > pH meter can be calibrated at 1, 2 or 3 points. If the built-in standard buffer solution group is used, the instrument can automatically identify the pH value of standard buffer solution ring calibration< Br > < br > 2. Calibration setting < br > short press the setting key, the current MTC temperature value flashes, and press the reading key to confirm. The current preset buffer group flickers, use} or} key to select the buffer group to use, and press the reading key to confirm< Br > < br > 3. One point calibration < br > 3.1 put the electrode into the buffer solution and press the calibration key to start calibration. The calibration and measurement icons will be displayed at the same time. After the signal is stable, the instrument will automatically finish the terminal according to the preselected terminal (display screen display) or press the reading key to manually finish the terminal (display screen display)< Br > < br > 3.2 after pressing the reading key, the instrument will display the zero point and slope, and then automatically return to the measurement screen< Br > note: when one point calibration is performed, only the zero point is adjusted. If the electrode has been calibrated at many points before, its slope will be saved. Otherwise, the theoretical slope of - 59.16 MV / pH was adopted. Long press the calibration key, the meter will display the slope and zero value, and then the meter will return to the measurement screen< br>

8. Because the foreign SIM card may be compatible with the mobile phone, in order to ensure that your machine can use the SIM card normally, it is recommended to try to insert it< The mobile phone in mobile phone can be used in non Chinese mainland, depending on the network mode supported by
1. mobile phone; < br.
2. Whether the network frequency band matches the network mode of the country and region, and whether it matches the network frequency band. If it matches, you can use
if you use a domestic mobile phone card, you need to contact a domestic operator to open an international roaming service and verify whether it supports the use
if you use the mobile phone card in Chinese mainland, you need to contact the operator to verify the network frequency.

9. Generally, bidirectional trigger diode can be used to trigger

10. Find the MTC option in the machine settings, and then save the settings. According to the MTC manual, it's very simple, but the teacher drops the material, and MTC is not easy to use.