Mining system of spark holding money

1. HuaHuo coin is issued by swindlers. It is specially issued to leeks who believe that swindlers can make a lot of money by buying money. If they lose money by buying RMB, they can make a lot of money by buying money issued by swindlers!

2. Modern cigarette labels also have collection value. Collection is to make today history and make history reappear today. The modern cigarette label is the future wealth. In my opinion, all cigarette labels have their value. In recent years, on average, every year and a half, there is a major revision of cigarette labels. For example, in the past ten years, the medium tar has been changed to tar, some manufacturers have been separated, the amount of nicotine in flue gas has been changed from small harm to big harm, some groups have been merged, the environmental protection signs have been added, the website and customer service telephone have been added, and the proction has been collectivized. Recently, the system has been reformed in the China tobacco company, and every development has turned the original everywhere into collectibles. For example, the shilin of Qujing tobacco factory in Yunnan Province is the most common one. After the revision, it caught up with the small harmful and changed to the big harmful, and immediately made a new plate. Therefore, there are few new versions of shilin with small harmful, and I have only found two for many years. Hard shell cigarette label is divided into flip cigarette label (that is, ordinary label) and drawer type label, as well as other varieties. No matter what kind of material and packaging, cigarette label has collection value. I suggest you take it apart for preservation. If you don't take it apart, it's called 3D standard. Although it's good-looking, it also keeps its original appearance, but it has several fatal shortcomings: first, it takes up space. Once your collection is on a large scale, several overcoats are not enough; second, it's not easy to tidy up and messy; third, it's easy to wear and tear, even if it's covered with plastic film, it's not good-looking; fourth, the text and other information at the sticky mouth can't be seen, This is very important information for collection and research. The fifth is that some procts are not good, such as flattened ones, and they can't be dismantled. At that time, it will be more and more chaotic. Sixth, once you finally decide to dismantle them all in the future, you will find that it is very difficult to dismantle the old cigarette labels five years ago. It is suggested that you open the collection, but you should have better skills. If you don't have to practice more, you will have experience if you open hundreds of them. In addition to some rare new ones marked with fake goods, there are few new ones after 80. Is the new one more valuable or the unsealed one? Cigarette label paper thin and soft called soft paper label, referred to as soft label. Generally speaking, the better the appearance, the higher the collection value. New procts that are complete but not used for packaging; After packaging, it is called old proct (usually top grade, middle grade and inferior grade are used to indicate the degree of old proct); Part of the missing is called the remnant; If there are mistakes in the printing of drawings, such as color leakage, dislocation, overlap, etc., they will be regarded as waste procts. Hard shell cigarette label is divided into flip cigarette label (that is, ordinary label) and drawer type label, as well as other varieties. No matter what kind of material and packaging, cigarette label has collection value. At present, in order to reject fakes, the market has become popular to collect 3D labels. A cigarette factory will print a lot of wrapping paper and discard it, so that it becomes a collection directly? In the past ten years, the medium tar has been changed to the quantity tar, some manufacturers have been separated, the amount of nicotine in flue gas has been changed from small harm to big harm, some groups have been merged, the environmental protection logo has been added, the website and customer service telephone have been added, and the proction has been collectivized. Recently, the system has been reformed in China tobacco company, and each development has turned the original new standard into a collection. Some of the early new labels were brought out by the staff of the printing factory. If you want to be famous or appreciate the value of any collection, there are only two ways. One is wide, that is to say, you have everything that has ever been on the market. The other is fine, that is, no one can do anything for you. I can only analyze it like this (because I am also a lover of this treasure, and I only collect hard labels). More than 1000 is not much, In the circle I know, there are more than ten thousand. 2. I don't know the scope of your collection and the style of your collection. In China, especially since the 1980s, all kinds of brands have developed too fast, and their value is not high. 3. In the early stage of collection, it is a kind of self entertainment, not too utilitarian. Collection, sometimes it is a lifetime to see the value Liquor label is one of the five major collection categories in the world, which has always been favored by collection investors. There are many kinds of cigarette labels, but there are more than one thousand new cigarette labels in China every year. It is not realistic to collect all of them. Therefore, it is very important for cigarette label collectors to set a goal. The common collection directions of cigarette labels are as follows: special collection, special topic, ordinary cigarette labels can be divided into many topics by their names and patterns, such as city names, animals and plants, people, places of interest, etc. taking places of interest as an example, there are many kinds of cigarette labels, such as Huqiu, Shilin, Tianshan, Xihu, great wall, Three Gorges, Fangta, Wusong, Wutai Mountain, Jiuzhaigou, Qianshi bridge, etc. Collectors can choose one of the special collections. Special collection brand label is a special collection of cigarette labels of a certain manufacturer or brand. There are more than 100 large and medium-sized cigarette enterprises in China, and many brands are well-known at home and abroad. Some brands have kept a kind of packaging pattern for many years, but the packaging materials and printing technology are different in different periods. A good collection is a history of the proction and development of the enterprise or brand. There are two kinds of commemorative cigarette labels. One is a cigarette label specially registered to commemorate someone or something, such as & quot; in commemoration of the 11th Asian Games; ９０"、 In memory of Zhou Enlai's & quot; Prunus euphratica Commemorating the return of Hong Kong; Celebration & quot; Etc; The other is to print commemorative words or patterns on registered cigarette labels, such as & quot; Golden Monkey & quot; The commemorative cigarette label of the agricultural games; Sanyou Cave & quot; The Three Gorges Project commemorative smoke label and so on. There are many commemorative cigarette labels in China, which is a good collection category. In order to promote sales, many manufacturers have proced a complete set of cigarette labels composed of several cigarette labels, among which & quot; Ten sceneries of West Lake Taiyuan plant & quot; Mount Wutai The & quot; A tour of the Central Plains Nanjing plant's & quot; Twelve beauties in Jinling The & quot; Water Margin & quot; And so on. Because of many sets, and some deliberately rece the output of a few of them, it is extremely difficult to gather them together. Because of this, it is more attractive to collect. Special label cigarettes are usually packaged with 20 pieces of soft or hard shell paper, but a few of them are also packaged with special packaging. There are 2 miniature cigarette labels and 500 large cigarette labels. There are also cigarette labels packed with copper, iron, aluminum, plastic and even gold, silver and other materials. This kind of cigarette label belongs to the special proct of cigarette label family, and has high collection value.

3. It's possible. Now some clothes are made of chemical fiber, which can be ignited by strong electric spark
as for mining, if it is a coal mine, there may be a lot of combustible materials in the mine, and even explosion risk in case of electric spark.

4. Vehicle repair fitter safety system

1. Check the lifting equipment and tools for good performance before work

2. When repairing the chassis part of the vehicle, especially when assembling and disassembling the tire, it is necessary to stabilize the jack and cushion the wooden pillow or iron stool

3. When repairing the mper and shovel crane, the sleeper must be padded and the support frame must be supported

4. Before the start-up of the test run, the surrounding environment should be checked first, and the faults should be checked ring the operation. Attention should be paid to the rotating part at any time to prevent the head and hand from being injured

5. If a test run is required, it must be driven by a licensed person. When trying to brake, you must concentrate, pay attention to the pedestrians in front of the vehicle, the pile of things and see if there is a vehicle behind. The repairman without driver's license is not allowed to start all kinds of vehicles. He is only allowed to start in place

6. When testing the high-pressure spark, it is not allowed to test at the oil inlet and gasoline filling place to prevent fire or explosion

7. When the oil system breaks down, gasoline is not allowed to be used by direct current or directly injected into the carburetor to start the engine

8. It is forbidden to take people with you ring the test run, no people are allowed to stand on both sides of the cab, and it is forbidden to get on or off the vehicle before it is stopped

9. No open fire is allowed for lighting when repairing anchored vehicles inside or outside the factory at night or when the sky is dim and the sight is poor

10. Fire prevention measures should be taken in advance when vehicles need to use open flame for gas cutting and welding<

11. The test run or driving of the battery truck must be approved by the team leader before it can be carried out
safety management system for aerial work

1. Be familiar with the professional technology and proceres of this type of work< 2. At least 18 years old and pass the physical examination before working at height. People with high blood pressure, heart disease, epilepsy, mental illness and other conditions unsuitable for working at height are forbidden to work at height

3. The working slope is more than 45 meters away from the ground °， If there is no stable standing place on the working ground or there is vibration, it should be regarded as working at height

4. Wear protective articles neatly, tie the corners of trousers, wear safety helmet, and do not wear smooth hard soled shoes. The safety belt with sufficient strength shall be provided, and the rope shall be firmly tied on the solid building structure or metal structure frame, and it is not allowed to be tied on the moving objects

5. Before climbing, the person in charge of construction shall conct on-site safety ecation for all personnel

6. The climbing tools and safety appliances (such as safety helmet, safety belt, ladder, springboard, scaffold, guard board and safety net) used for inspection must be safe and reliable, and risk-taking operation is strictly prohibited

7. The forbidden area should be marked on the ground of the aerial work area, surrounded by bamboo fence, and hung with warning signs such as "no admittance", "no passage"

8. Before working near the power (low voltage) line, it is necessary to contact the power outage. Work can only be carried out after power failure is confirmed, and insulation wall shall be set. The operator should be at least 2 meters away from the wire (low voltage). It is forbidden to work under high voltage line

9. Tools, parts and materials used in aerial work must be put into tool bags. Do not hold objects when going up and down; And must from the designated route up and down, not in high altitude throwing materials or tools and other objects; Tools and materials that are easy to roll and slide shall not be stacked on the scaffold; No fighting. After the completion of the work, all easily falling objects such as tools, other materials and other parts shall be cleaned up in time to prevent falling and hurting people. Reliable lifting machines and tools shall be used when loading and unloading large parts

10. Pay attention to dangerous signs and places everywhere. Sufficient lighting facilities must be set up for night operation, otherwise construction is prohibited

11. Vertical operation up and down at the same time is strictly prohibited. If vertical operation is necessary under special circumstances, it shall be approved by relevant leaders, and special protective shed or other isolation facilities shall be provided between upper and lower floors

12. It is strictly forbidden to sit at high altitude without barrier to rest and prevent falling

13. It is strictly forbidden to upload or download the hoist and other lifting equipment

14. When working on the asbestos tile roof, the ladder and other objects should be used to pad on the tiles to prevent stepping on the asbestos tiles and falling

15. Under no circumstances should you work or pass on the top of the wall

16. The load of scaffold should not exceed 270 kg per square meter. If the load must be increased, the scaffold should be properly reinforced

17. Two people can't work at the same time when the length is more than 3 meters

18. When carrying out high altitude welding and oxygen cutting operations, the flammable and explosive devices within the spark splash range must be removed in advance

19. Scaffold board, ramp board, springboard and transportation road should be cleaned at any time. In case of mud, water, ice and snow, effective anti-skid measures shall be taken, and the work can be started only after the safety officer's inspection and approval. When the frozen snow is serious and cannot be removed, stop working at height

20. In case of gale above level 6, it is forbidden to work at height in the open air

21. When using a ladder, you must first check whether the ladder is firm and whether it meets the safety requirements. Gradient 60 ° It's better. The width of the bottom of the ladder shall not be less than 50cm, and there shall be anti-skid device. When there is no hook on the top of the ladder and the foot of the ladder is not stable, the ladder must be manned and the pull rope of the herringbone ladder must be firm.

5. How to play my world mining version of mercenary system? What should we pay attention to in the mercenary system In my world mining edition, the mercenary system is the place for the management and combination of mercenaries. Click on the list of mercenaries, you can directly view the number, quality and composition of combined skills of mercenaries, and determine the combat power of players. Here is my world mining version of the mercenary system how to play.

6. What I found is as follows: this system is formulated to ensure the safe storage of finished procts, facilitate proct identification and access, and avoid stacking confusion
1. Responsibilities:
2.1 be responsible for the acceptance of the warehousing specification, model, quantity and quality of various finished procts, reasonably arrange the division of finished proct warehouses, store the finished procts in a safe and orderly manner, be responsible for the safety, health and management of the warehouse, identify the warehousing finished procts, and prevent the confusion of color number, variety and specification of finished procts after warehousing, Establish the finished goods warehouse in and out account, fill in the finished goods warehouse in form together with the supervisor of the finished goods workshop every day, and submit one to the sales department and the finance department respectively
2.2 the manager of finished proct warehouse must strictly abide by the relevant warehouse management system and have the basic knowledge of the materials under his control. The stacking principle of finished procts is: stacking height ≤ 1.8m, 500 × Five pieces of 500 ceramic tiles are arranged in horizontal row and one in vertical row, with 6 pieces in each layer. They are staggered in three layers, and 2 pieces are pressed horizontally on the top. A total of 20 pieces are stacked independently
2.3 after receiving the delivery order or transfer order listed by the sales department, confirmed by the financial department and stamped with the financial seal, the warehouse keeper of finished procts should make clear the proct specification, model, grade and other requirements of customers for the procts, and check whether the procts are complete and meet the delivery requirements by the delivery order or transfer order, and then organize the delivery after confirmation For special cases, please refer to Article 4 of the regulations on emergency release)
2.4 if the customer requires the shipment quantity to be based on the actual loading quantity, the sales department shall issue the "delivery notice" without proct quantity, which shall be signed by the sales manager for confirmation, and the warehouse keeper shall deliver the goods according to the procere after receiving the "delivery notice". After all the finished procts are loaded, the warehouse keeper shall sign for confirmation and fill in the number of loading, and submit it to the sales department for issuing the delivery note
2.5 conct on-site tracking ring delivery and loading, and deliver goods in strict accordance with the delivery order or transfer order. The warehouse keeper has no right to change the model, number, grade, etc. of the procts to customers at will, and the damaged bricks shall not be loaded and sent out. If it is necessary to supplement the damaged quantity for special reasons, it must be signed by the director of the finished proct workshop before the damage can be repaired. When the proct is loaded, the consignor of the finished proct warehouse must count and confirm the quantity and quality of the proct with the cooperation of the customer. After approval, two consignors and the customer shall sign for confirmation at the same time
2.6 if the customer makes "bill before delivery" for special reasons, the validity period of delivery is 7 days. However, delivery shall not be carried out beyond the month. On the 25th day of each month, the warehouse keeper should contact the billing clerk of the sales department in time and draw the customer's attention to the timeliness of the invoice
2.7 if there is a demand for sample bricks, the sales department should issue the "sample application form" and report it to the general manager for approval, and then submit it to the finished proct warehouse for collection The sample application form is in quadruplicate, one for the office, two for the finished proct warehouse, three for the guard and four for the sales department
2.8 the manager of the finished proct warehouse should make the finished proct warehouse account every day and submit the daily report of finished procts to the relevant units before 11:30 a.m. the next day Finished proct daily report in triplicate, one of warehouse stub, two copies of sales department and three copies of general office)
2.9 the warehouse keeper of finished procts is responsible for the daily registration of the loading and unloading Manual of the loading and unloading workers, and summarize it to the finance department on the 25th of each month
2.10 on the 25th and the end of each month, we will check the inventory with the sales department, proction department and financial department, and fill in the inventory form (in quadruplicate, with one stub, one to the sales department, one to the financial department and one to the general office)< 2. Management system:
1. The manager of finished proct warehouse must work 15 minutes in advance
2. Don't leave the post without permission
3. The consignor of the finished proct warehouse must deliver the goods in strict accordance with the shipping order issued by the sales department
4. When delivering goods, the stevedores should obey the arrangement of the warehouse keeper to load the goods. If they fail to deliver goods and load the goods according to the warehouse keeper's requirements and do not obey the management, the warehouse keeper has the right to refuse to issue the "force information sheet" and report it to the property management department
5. The warehouse keeper should be responsible for the sanitation of the finished proct warehouse and arrange the stevedores to clean up before work
6. No man-made reason is allowed to break the bricks ring loading; If it does happen, the responsible person shall compensate according to the factory price
7. If the consignor or the driver breaks the bricks while driving, he / she should inform the sales department to compensate according to the price
8. When the finished procts are delivered out of the warehouse, the warehouse keeper and the loader must be on ty alternately
9. Non finished proct warehouse personnel are not allowed to enter the finished proct warehouse to pick up the finished procts without permission, and all finished procts in the finished proct warehouse can only be sent out after going through the warehouse out proceres. Otherwise, all the consequences will be borne by the responsible person
10. The warehouse keeper must strictly abide by the post responsibilities and operation proceres
11. In case of violation of the above regulations, the company will punish them in accordance with the proction management regulations.

7. 1 Purpose and scope
1.1 this system is formulated to strengthen and standardize the management of safety and fire prevention, prevent and rece fire hazards, and ensure the safety of enterprise property and employees' lives
1.2 this system specifies the responsibilities, working proceres and key points of fire safety in enterprises
1.3 this system is applicable to all units and employees in the company< General principles
2.1 adhere to the principle of "prevention first and combination of prevention and elimination", adhere to the principle of combining special organs with the masses, and implement the fire safety responsibility system
2.2 the enterprise implements the fire safety responsibility area and fire safety responsibility system, and the workshop directors and department heads are the fire safety responsible persons of the unit. Its main responsibilities are as follows:
2.2.1 draw up the annual fire work plan, organize and implement the daily fire safety management work
2.2.2 organize and implement fire prevention inspection and rectification of fire hazards
2.2.3 organize and implement the maintenance of fire-fighting facilities, fire-fighting equipment and fire safety signs of the unit to ensure that they are in good condition and effective, and to ensure that the evacuation passage and emergency exit are unblocked
2.2.4 organize and manage volunteer fire brigade
2.2.5 organize the publicity, ecation and training of fire knowledge and skills among employees, and organize the implementation and drill of fire fighting and emergency evacuation plans
2.3 when contracting, leasing or entrusted operation and management is implemented, the enterprise shall provide buildings that meet the requirements of fire safety, and the parties shall specify the fire safety responsibilities of each party in the contract in accordance with the relevant provisions; Fire engine passages, evacuation facilities involving public fire safety and other building fire-fighting facilities shall be managed by the property right unit or the entrusted management unit
3 responsibilities
3.1 the security department is the competent department of fire safety, responsible for the fire safety training of fire safety responsible persons, management personnel and key personnel, responsible for organizing the fire pre acceptance of construction projects, responsible for the safety inspection and management of key fire prevention parts and fire equipment, and participating in the emergency treatment of fire accidents, investigation and causes of fire accidents Responsibility identification and handling
3.2 safety technology department is the main Cooperation Department of fire safety, participating in the safety inspection and management of key fire prevention parts and fire equipment, organizing the preparation of emergency plans, participating in the investigation of fire accidents and their causes, responsibility identification and handling, etc
3.3 all functional departments and workshops are responsible for the daily safety and fire prevention management and inspection of the unit, and participate in the emergency treatment of fire accidents and the investigation of fire accidents
4 fire safety ecation and training
4.1 the security department concts fire safety training for the person in charge of fire safety, volunteer firefighters and key personnel every year. The main contents of ecation and training include: national fire safety laws and regulations, enterprise rules and regulations, key fire prevention points of key fire fighting parts, use technology of fire fighting equipment, procere requirements of emergency plan, etc
4.2 all functional departments and workshops conct fire safety training for their employees once a quarter. The main contents of ecation and training are: national fire safety laws and regulations, enterprise rules and regulations, fire safety knowledge of the post, the use of fire fighting equipment, and the basic knowledge of fire fighting
4.3 operators engaged in the operation, handling and storage of chemical inflammables and explosives, as well as electricians, welders and other fire electricians, must be trained and pass the examination before taking up their posts
5 fire prevention patrol and inspection
5.1 in the first week of January, April, July and October every year, the fire safety inspection is organized by the security department, and participated by the safety technology and environmental protection department, equipment power department, administration department and other units. The key contents are as follows:
5.1.1 whether the construction project strictly implements the code for fire protection design of buildings and other relevant regulations, and whether the regulations are implemented according to the fire risk classification of proction in the selection of address and fire resistance rating of buildings, setting of fire separation, fire separation, evacuation passageway, fire-fighting facilities, etc. The architectural design drawings shall be submitted to the fire supervision department for examination
5.1.2 whether good preventive measures and control measures are taken for key fire-fighting parts, management and maintenance of fire-fighting facilities and equipment, ecation and training of personnel, etc
5.1.3 implementation of rules and regulations by workshops and teams
5.1.4 maintenance and management of safety evacuation passageway, fire-fighting facilities or equipment, rectification of fire hazards, etc
5.2 each workshop and functional department shall conct fire safety inspection once a week for the workshop, the main contents of which are: the maintenance and management of on-site safety evacuation passageways, fire-fighting facilities or equipment, whether various fire hazards are rectified and eliminated, whether various inflammable and explosive materials and fire and power management measures meet the requirements of standards and specifications, Whether the operation methods of operators meet the requirements of safety operation proceres, etc
5.3 each team should carry out fire safety inspection every day, the main contents of which are: whether all kinds of fire hazards are eliminated, whether all kinds of flammable and explosive materials and fire and electricity management measures are in place, whether the personnel comply with the safety operation regulations, etc. Special personnel shall be assigned to check the power supply, fire source and other fire prevention conditions at the end of work every day, and the fire hazards found shall be eliminated in time to prevent accidents
5.4 for the hidden dangers and problems in the inspection and inspection, the rectification notice shall be issued, and the relevant units shall actively organize the rectification. After the implementation of the rectification, it shall be verified by the unit issuing the rectification notice
6 allocation, inspection and use of fire-fighting equipment and equipment
6.1 All units shall provide necessary fire-fighting equipment and equipment according to the actual situation, and obvious fire signs shall be set at key fire prevention parts
6.2 the full-time fire management personnel should establish the account of fire-fighting equipment and check and maintain it on time to ensure the normal use within the validity period. All kinds of fire extinguishers are inspected once a month, and timely replaced in case of pressure relief, shell deformation, brake handle loosening, etc. fire hydrants and fire booster pumps are often tested and started to ensure good and effective condition
6.3 all kinds of fire-fighting equipment should be placed according to the requirements for easy access, and it is forbidden to use them for other purposes
6.4 the fire hydrant should be checked and maintained regularly, and should not be occupied or used at will
6.5 the fire pool should always keep the required storage capacity, and the anti freezing measures should be taken in winter< The storage, transportation and use of inflammable and explosive materials must meet the requirements of fire and explosion prevention. When using all kinds of heating furnace and welding, cutting, baking, and other open fire operations, it is necessary to select a safe place, maintain fire separation, and improve the operation system
7.2 management of key parts of fire protection
7.2.1 the enterprise shall establish files of key parts of fire protection, implement two-level management, the security department shall implement key monitoring on key parts of fire protection of the company, and each workshop and functional department shall also implement key monitoring on key parts of fire protection of the unit
7.2.2 emergency plans should be established for key fire-fighting parts and regular drills should be concted
7.2.3 in case of open fire operation in key parts of fire control, it must be approved by the security department in advance, apply for "fire permit" and implement fire prevention measures
7.3 when adopting and researching new technology, new material, new equipment and new process, it is necessary to study the fire risk and take corresponding fire safety measures
7.4 it is forbidden to build and build inflammable buildings without permission, and it is not allowed to occupy the fire prevention space. It is necessary to keep all kinds of emergency exits, evacuation passages and fire engine passages unblocked at any time
7.5 the volunteer fire brigade should be equipped with necessary fire fighting equipment and equipment, clear division of labor, and do a good job in learning and practicing fire fighting knowledge, so as to ensure and improve its combat effectiveness
7.6 oil stained articles such as used oil cotton yarn, oil gloves and combustible packaging should be stored in a safe place and treated regularly
7.7 all functional departments and workshops shall sign the fire safety responsibility letter for the external construction units entering the plant area, implement the fire safety measures and responsibilities, and enter the site for construction only after being approved by the security department
8 warehouse fire management
8.1 it is not allowed to set office and rest room in class A and class B goods warehouse. When other warehouses must be equipped with offices, one corner of the warehouse can be adjacent to the first and second grade fire resistance buildings without holes, and the doors and windows of the buildings are directly outside the warehouse
8.2 the storage category of class A, B and C articles in the warehouse shall not be changed without authorization. If it is necessary to change, it shall be reported to the local public security fire supervision agency for approval
8.3 according to the national code for fire protection design of buildings, the articles stored in the warehouse should be divided into five categories according to the degree of fire risk: A, B, C, D and E, and stored separately. Articles stored in the open air shall be classified, stacked, grouped and stacked, and necessary fire prevention space shall be reserved
8.4 class A and class B bottled liquids should not be stored in the open air. When they must be stored in the open air, cooling measures must be taken in hot season
8.5 the inventory items should be classified and stored in stacks. The floor area of each stack should not be more than 100m2, the distance between stacks should not be less than 1m, the distance between stacks and walls should not be less than 0.5m, the distance between stacks and beams and columns should not be less than 0.3m, and the width of main passage should not be less than 2m
8.6 class A and class B articles, general articles and articles prone to chemical reaction with each other or different fire fighting methods must be stored in separate rooms and warehouses, and the name, nature and fire fighting method of the stored articles shall be marked in conspicuous places
8.7 articles that are prone to spontaneous combustion or decompose in water must be stored in a place with low temperature, good ventilation and dry air, and special instruments shall be installed for regular detection, and humidity and temperature shall be strictly controlled
8.8 articles should be inspected by professional personnel before they are put into storage, and they can only be put into storage after they are confirmed to have no hidden danger such as fire
8.9 all motor vehicles entering the storage area must be equipped with fire hoods
8.10 cars and tractors are not allowed to enter the warehouses of class A, B and C goods
8.11 the battery trucks and forklifts entering the warehouses of class A and class B goods must be explosion-proof; The battery trucks and forklifts entering the warehouse of class C goods must be equipped with safety devices to prevent sparks from splashing out
8.12 after loading and unloading goods, all kinds of motor vehicles are not allowed to park and repair in the warehouse area, warehouse and goods
8.13 temporary buildings and structures are not allowed to be built in the reservoir area. When it is necessary to build e to loading and unloading operations, it must be approved by the unit's Fire Prevention Director and removed immediately after loading and unloading operations
8.14 when loading and unloading class A and class B articles, operators are not allowed to wear work clothes and caps that are easy to proce static electricity and use tools that are easy to proce sparks, and strictly prevent vibration, impact, heavy pressure, friction and inversion. Measures to eliminate static electricity should be taken for loading and unloading equipment easy to generate static electricity
8.15 specific requirements for fire source management in warehouse:
8.15.1 the warehouse should set up conspicuous fire prevention signs, and the personnel entering the warehouse area of class A and class B articles must register and hand over the fire they carry
8.15.2 it is strictly forbidden to use open fire in the warehouse. When using open fire outside the warehouse, the fire permit must be obtained and approved by the security department, and strict safety measures must be taken; The hot work permit shall indicate the place, time, the person who started the fire, the on-site guardian, the person who approved the fire and the fire prevention measures. It is not allowed to use the stove for heating in the warehouse. When it is used in the warehouse area, it shall be approved by the person in charge of fire prevention
8.15.3 it is strictly forbidden to set off fireworks in the reservoir area and within 50 meters around
9 preventive measures for explosion accidents
9.1 control and elimination of fire sources
9.1.1 when heating flammable substances, the use of open fire and steam or other heat carriers should be avoided as far as possible. If it is necessary to use open fire, the equipment shall be strictly sealed, and the combustion chamber shall be separated from the equipment or properly separated