What does mining remote control mean
Publish: 2021-04-22 03:43:12
1. Will
remote control is a technology in which one computer (remote / client of the main control side) leaves to control another computer (host / server of the controlled side) on the network. Here, remote control is not literally remote, generally refers to controlling remote computer through the network. However, most of the time, we often refer to remote control in LAN. When the operator uses the main control terminal computer to control the controlled terminal computer, just like sitting in front of the screen of the controlled terminal computer, he can start the application program of the controlled terminal computer and use the files of the controlled terminal computer, You can even use the external printing equipment (printer) and communication equipment (modem or special line, etc.) of the controlled computer to print and access the Internet, just as you use the remote control to control the volume of the TV, change the channel or switch the TV. However, there is a concept that needs to be clear, that is, the main control computer only transmits the keyboard and mouse instructions to the remote computer, and at the same time transmits the screen picture of the controlled computer back through the communication line. In other words, it seems that we control the controlled computer to operate on the computer in front of us. In fact, it is realized in the remote computer. Whether we open files, browse the Internet, download, etc., it is stored in the remote controlled computer
the remote control technology in the computer began in the DOS era, but at that time, because there was no big change in technology, the network was underdeveloped, and the market had no higher requirements, so the remote control technology did not attract more people's attention. However, with the high development of network, the need of computer management and technical support, remote operation and control technology has attracted more and more attention. Remote control generally supports the following network modes: LAN, Wan, dial-up mode and Internet mode. In addition, some remote control software also supports controlling the remote computer through serial port, parallel port and infrared port (however, the remote computer mentioned here can only be a computer within a limited distance). Traditional remote control software generally uses NetBEUI, NetBIOS, IPX / SPX, TCP / IP and other protocols to achieve remote control. However, with the development of network technology, many remote control software provide Java technology to control remote computers through web pages, which can achieve remote control under different operating systems.
remote control is a technology in which one computer (remote / client of the main control side) leaves to control another computer (host / server of the controlled side) on the network. Here, remote control is not literally remote, generally refers to controlling remote computer through the network. However, most of the time, we often refer to remote control in LAN. When the operator uses the main control terminal computer to control the controlled terminal computer, just like sitting in front of the screen of the controlled terminal computer, he can start the application program of the controlled terminal computer and use the files of the controlled terminal computer, You can even use the external printing equipment (printer) and communication equipment (modem or special line, etc.) of the controlled computer to print and access the Internet, just as you use the remote control to control the volume of the TV, change the channel or switch the TV. However, there is a concept that needs to be clear, that is, the main control computer only transmits the keyboard and mouse instructions to the remote computer, and at the same time transmits the screen picture of the controlled computer back through the communication line. In other words, it seems that we control the controlled computer to operate on the computer in front of us. In fact, it is realized in the remote computer. Whether we open files, browse the Internet, download, etc., it is stored in the remote controlled computer
the remote control technology in the computer began in the DOS era, but at that time, because there was no big change in technology, the network was underdeveloped, and the market had no higher requirements, so the remote control technology did not attract more people's attention. However, with the high development of network, the need of computer management and technical support, remote operation and control technology has attracted more and more attention. Remote control generally supports the following network modes: LAN, Wan, dial-up mode and Internet mode. In addition, some remote control software also supports controlling the remote computer through serial port, parallel port and infrared port (however, the remote computer mentioned here can only be a computer within a limited distance). Traditional remote control software generally uses NetBEUI, NetBIOS, IPX / SPX, TCP / IP and other protocols to achieve remote control. However, with the development of network technology, many remote control software provide Java technology to control remote computers through web pages, which can achieve remote control under different operating systems.
2. The so-called remote control refers to that the management personnel connect the computer to be controlled by means of remote dial-up through computer network or internet access, display the desktop environment of the controlled computer to their own computer, and configure, install and modify the software of the remote computer through the local computer. WOL (remote wake-up), that is, remote boot through local area network
definition:
remote here does not mean long distance literally. It generally refers to controlling remote computer through network. The early remote control often refers to the remote control in the local area network. With the Internet and technological innovation, just like sitting in front of the screen of the controlled end computer, it can start the application program of the controlled end computer and use or steal the files of the controlled end computer, You can even use the external printing equipment (printer) and communication equipment (modem or special line, etc.) of the controlled computer to print and access the external network and Intranet, just like using the remote control to control the volume of the TV, change the channel or switch the TV. However, there is a concept that needs to be clear, that is, the main control computer only transmits the keyboard and mouse instructions to the remote computer, and at the same time transmits the screen picture of the controlled computer back through the communication line. In other words, it seems that the operation of controlling the controlled computer is carried out on the computer in front of us. In fact, it is realized in the remote computer. Whether opening files, browsing on the Internet, downloading and so on are stored in the remote controlled computer
remote control can only be carried out through the network. The local computer is the sending end of the operation instruction, which is called the main control end or the client. The non local controlled computer is called the controlled end or the server“ "Remote" is not equal to "remote". The main control end and the controlled end can be located in the same room of the same LAN, or two or more computers connected to the Internet at any location
most of the early remote control refers to computer desktop control. The actual remote control uses Android, apple, notebook and computer to control the lights on the road, the curtains connected to the Internet, the TV, DVD, camera and classroom projector. Command center and large conference room are widely used
principle:
remote control is a technology in which one computer (remote / client of the main control end) leaves the network to control another computer (host / server of the controlled end), which is mainly realized by remote control software
working principle of remote control software: the remote control software is generally divided into two parts: client program and server program. Usually, the client program is installed on the computer of the main control end, and the server program is installed on the computer of the controlled end. In use, the client program sends signals to the server program in the controlled end computer to establish a special remote service. Then, through this remote service, it uses various remote control functions to send remote control commands to control the operation of various application programs in the controlled end computer.
definition:
remote here does not mean long distance literally. It generally refers to controlling remote computer through network. The early remote control often refers to the remote control in the local area network. With the Internet and technological innovation, just like sitting in front of the screen of the controlled end computer, it can start the application program of the controlled end computer and use or steal the files of the controlled end computer, You can even use the external printing equipment (printer) and communication equipment (modem or special line, etc.) of the controlled computer to print and access the external network and Intranet, just like using the remote control to control the volume of the TV, change the channel or switch the TV. However, there is a concept that needs to be clear, that is, the main control computer only transmits the keyboard and mouse instructions to the remote computer, and at the same time transmits the screen picture of the controlled computer back through the communication line. In other words, it seems that the operation of controlling the controlled computer is carried out on the computer in front of us. In fact, it is realized in the remote computer. Whether opening files, browsing on the Internet, downloading and so on are stored in the remote controlled computer
remote control can only be carried out through the network. The local computer is the sending end of the operation instruction, which is called the main control end or the client. The non local controlled computer is called the controlled end or the server“ "Remote" is not equal to "remote". The main control end and the controlled end can be located in the same room of the same LAN, or two or more computers connected to the Internet at any location
most of the early remote control refers to computer desktop control. The actual remote control uses Android, apple, notebook and computer to control the lights on the road, the curtains connected to the Internet, the TV, DVD, camera and classroom projector. Command center and large conference room are widely used
principle:
remote control is a technology in which one computer (remote / client of the main control end) leaves the network to control another computer (host / server of the controlled end), which is mainly realized by remote control software
working principle of remote control software: the remote control software is generally divided into two parts: client program and server program. Usually, the client program is installed on the computer of the main control end, and the server program is installed on the computer of the controlled end. In use, the client program sends signals to the server program in the controlled end computer to establish a special remote service. Then, through this remote service, it uses various remote control functions to send remote control commands to control the operation of various application programs in the controlled end computer.
3. Remote control is the technology that one computer (remote / client of the main control side) leaves to control another computer (host / server of the controlled side) on the network. The remote control here does not mean the long distance literally. It generally refers to the remote control of the remote computer through the network. However, most of the time, what we call remote control often refers to the remote control in the local area network. When the operator uses the main control terminal computer to control the controlled terminal computer, just like sitting in front of the screen of the controlled terminal computer, he can start the application program of the controlled terminal computer and use the files of the controlled terminal computer, You can even use the external printing equipment (printer) and communication equipment (modem or special line, etc.) of the controlled computer to print and access the Internet, just as you use the remote control to control the volume of the TV, change the channel or switch the TV. However, there is a concept that needs to be clear, that is, the main control computer only transmits the keyboard and mouse instructions to the remote computer, and at the same time transmits the screen picture of the controlled computer back through the communication line. In other words, it seems that we control the controlled computer to operate on the computer in front of us. In fact, it is realized in the remote computer. Whether we open files, browse the Internet, download, etc., it is stored in the remote controlled computer
the remote control technology in the computer began in the DOS era, but at that time, because there was no big change in technology, the network was underdeveloped, and the market had no higher requirements, so the remote control technology did not attract more people's attention. However, with the high development of network, the need of computer management and technical support, remote operation and control technology has attracted more and more attention. Remote control generally supports the following network modes: LAN, Wan, dial-up mode and Internet mode. In addition, some remote control software also supports controlling the remote computer through serial port, parallel port and infrared port (however, the remote computer mentioned here can only be a computer within a limited distance). Traditional remote control software generally uses NetBEUI, NetBIOS, IPX / SPX, TCP / IP and other protocols to achieve remote control. However, with the development of network technology, many remote control software provide Java technology to control remote computers through web pages, which can achieve remote control under different operating systems.
the remote control technology in the computer began in the DOS era, but at that time, because there was no big change in technology, the network was underdeveloped, and the market had no higher requirements, so the remote control technology did not attract more people's attention. However, with the high development of network, the need of computer management and technical support, remote operation and control technology has attracted more and more attention. Remote control generally supports the following network modes: LAN, Wan, dial-up mode and Internet mode. In addition, some remote control software also supports controlling the remote computer through serial port, parallel port and infrared port (however, the remote computer mentioned here can only be a computer within a limited distance). Traditional remote control software generally uses NetBEUI, NetBIOS, IPX / SPX, TCP / IP and other protocols to achieve remote control. However, with the development of network technology, many remote control software provide Java technology to control remote computers through web pages, which can achieve remote control under different operating systems.
4. Remote control is a technology in which one computer (remote / client of the main control terminal) leaves the network to control another computer (host / server of the controlled terminal)
remote control can only be carried out through the network. The local computer is the sending end of the operation instruction, which is called the main control end or the client. The non local controlled computer is called the controlled end or the server“ "Remote" is not equal to "remote". The main control end and the controlled end can be located in the same room of the same LAN, or two or more computers connected to the Internet at any location
remote control software is generally divided into two parts: one is the client program client, the other is the server program server (or systry). Before use, the client program needs to be installed on the main control computer, and the server program needs to be installed on the controlled computer. The process of its control is to execute the client program on the main control end computer, send signals to the server program in the controlled end computer like an ordinary client, establish a special remote service, and then use the remote control function to send remote control commands through the remote service to control the operation of various application programs in the controlled end computer, This remote control mode is based on remote service.
remote control can only be carried out through the network. The local computer is the sending end of the operation instruction, which is called the main control end or the client. The non local controlled computer is called the controlled end or the server“ "Remote" is not equal to "remote". The main control end and the controlled end can be located in the same room of the same LAN, or two or more computers connected to the Internet at any location
remote control software is generally divided into two parts: one is the client program client, the other is the server program server (or systry). Before use, the client program needs to be installed on the main control computer, and the server program needs to be installed on the controlled computer. The process of its control is to execute the client program on the main control end computer, send signals to the server program in the controlled end computer like an ordinary client, establish a special remote service, and then use the remote control function to send remote control commands through the remote service to control the operation of various application programs in the controlled end computer, This remote control mode is based on remote service.
5. Remote control is the technology that one computer (remote / client of the main control side) leaves to control another computer (host / server of the controlled side) on the network. The remote control here does not mean the long distance literally. It generally refers to the remote control of the remote computer through the network. However, most of the time, what we call remote control often refers to the remote control in the local area network. When the operator uses the main control terminal computer to control the controlled terminal computer, just like sitting in front of the screen of the controlled terminal computer, he can start the application program of the controlled terminal computer and use the files of the controlled terminal computer, You can even use the external printing equipment (printer) and communication equipment (modem or special line, etc.) of the controlled computer to print and access the Internet, just as you use the remote control to control the volume of the TV, change the channel or switch the TV. However, there is a concept that needs to be clear, that is, the main control computer only transmits the keyboard and mouse instructions to the remote computer, and at the same time transmits the screen picture of the controlled computer back through the communication line. In other words, it seems that we control the controlled computer to operate on the computer in front of us. In fact, it is realized in the remote computer. Whether we open files, browse the Internet, download, etc., it is stored in the remote controlled computer
the remote control technology in the computer began in the DOS era, but at that time, because there was no big change in technology, the network was underdeveloped, and the market had no higher requirements, so the remote control technology did not attract more people's attention. However, with the high development of network, the need of computer management and technical support, remote operation and control technology has attracted more and more attention. Remote control generally supports the following network modes: LAN, Wan, dial-up mode and Internet mode. In addition, some remote control software also supports controlling the remote computer through serial port, parallel port and infrared port (however, the remote computer mentioned here can only be a computer within a limited distance). Traditional remote control software generally uses NetBEUI, NetBIOS, IPX / SPX, TCP / IP and other protocols to achieve remote control. However, with the development of network technology, many remote control software provide Java technology to control remote computers through web pages, which can realize remote control under different operating systems, For example, Digital Tech Technology Co., Ltd. launched the world's first set of cross platform remote control software based on Chinese Java -- easy control last year.
the remote control technology in the computer began in the DOS era, but at that time, because there was no big change in technology, the network was underdeveloped, and the market had no higher requirements, so the remote control technology did not attract more people's attention. However, with the high development of network, the need of computer management and technical support, remote operation and control technology has attracted more and more attention. Remote control generally supports the following network modes: LAN, Wan, dial-up mode and Internet mode. In addition, some remote control software also supports controlling the remote computer through serial port, parallel port and infrared port (however, the remote computer mentioned here can only be a computer within a limited distance). Traditional remote control software generally uses NetBEUI, NetBIOS, IPX / SPX, TCP / IP and other protocols to achieve remote control. However, with the development of network technology, many remote control software provide Java technology to control remote computers through web pages, which can realize remote control under different operating systems, For example, Digital Tech Technology Co., Ltd. launched the world's first set of cross platform remote control software based on Chinese Java -- easy control last year.
6. The remote controller is connected with the computer through USB; Through the Internet, remote operation and control of any registered computer in different places is the same as that of local computer. At the same time, file transmission between computers in two places can be carried out. All instructions and information in this process are encrypted by SSL. If you lose it, you don't need to worry. Without a login password, you can't control the registered computer, which has a higher level of security
the unique serial number bound with the hardware controller is set in the remote controller, and cannot be copied. The remote controller is connected with the controlled computer, and the software embedded in the remote controller is used to register with the controlled computer. The remote controller is connected with any computer (main control computer), and connected with the registered controlled computer through the Internet, and operates and controls it as if it were operated and controlled locally. At the end of the operation process, there is no need to install software in the main control computer, and no operation trace will be left on the main control computer. The remote controller can also transfer file data between the main control computer and the controlled computer
the unique serial number bound with the hardware controller is set in the remote controller, and cannot be copied. The remote controller is connected with the controlled computer, and the software embedded in the remote controller is used to register with the controlled computer. The remote controller is connected with any computer (main control computer), and connected with the registered controlled computer through the Internet, and operates and controls it as if it were operated and controlled locally. At the end of the operation process, there is no need to install software in the main control computer, and no operation trace will be left on the main control computer. The remote controller can also transfer file data between the main control computer and the controlled computer
7. Remote control is a command code program through the port IP. After the program invades, it gets the client's account and password through the backdoor Trojan horse. The IP of the machine is used for intrusion control. Generally, firewalls and antivirus software will be prompted and proposed repair methods. The remote controlled machine is just like the controller playing in front of the computer. It can be said that he plays with your computer. What can you do with the computer What can you do with a computer? If you have a video head, he can use the video head to record and take pictures, so it's quite dangerous! But you don't have a video head. Even if he can control your machine, he can't see it. You haven't seen this kind of tool yet! So you can rest assured! ~
add to the question: generally, you send scripts and codes of backdoor Trojans and commands through QQ, so try not to accept the files of strange friends, There are few remote control code through Internet browser, because it will take a lot of trouble to invade the website first, and it is very difficult for ordinary people to hook up. Only programming experts or top-level predecessors can do it, so as long as the security equipment on your machine needs some, it will not be controlled! Also had better not go to the bad website, where anything is very easy to hide into the machine!! The security software I recommend is ka8360, which is very good. It can kill some simple Trojans, clean up malicious programs, protect the machine, repair system vulnerabilities, and it's free. Oh, ka8360 is more than 30 years old, the money is very cheap, the effect is good, and many people use it! So you don't have to worry! Virus Trojan won't find you naturally!!!!!!!
add to the question: generally, you send scripts and codes of backdoor Trojans and commands through QQ, so try not to accept the files of strange friends, There are few remote control code through Internet browser, because it will take a lot of trouble to invade the website first, and it is very difficult for ordinary people to hook up. Only programming experts or top-level predecessors can do it, so as long as the security equipment on your machine needs some, it will not be controlled! Also had better not go to the bad website, where anything is very easy to hide into the machine!! The security software I recommend is ka8360, which is very good. It can kill some simple Trojans, clean up malicious programs, protect the machine, repair system vulnerabilities, and it's free. Oh, ka8360 is more than 30 years old, the money is very cheap, the effect is good, and many people use it! So you don't have to worry! Virus Trojan won't find you naturally!!!!!!!
8. 1. Application of "remote assistance" in Windows XP system
"remote assistance" is a simple remote control method provided by Windows XP system. The initiator of remote assistance sends a request for assistance to the contact person in messenger through MSN Messenger. After obtaining the consent of the other party, the remote assistance can be carried out. In the remote assistance, the computer of the assisted party will be temporarily controlled by the assisted Party (known as the expert in the remote assistance program). The expert can carry out system maintenance, install software, etc. in the controlled computer Deal with some problems in the computer, or demonstrate some operations to the assisted person
if you have already installed MSN Messenger 6.1, you need to install Windows Messenger 4.7 for remote assistance
when using remote assistance, you can click the menu command "operation → seek remote assistance" in the main dialog box of MSN Messenger (as shown in Figure 2). Then select the contact you want to invite in the seek remote assistance dialog box that appears. When the invitation is accepted, the remote assistance program dialog box opens. The invitee can manipulate the invitee's computer by clicking the "take over control" button in the "remote assistance" dialog box
the master and controller can also type messages, talk and send files in the "remote assistance" dialog box, just like in MSN Messenger. If the accused wants to terminate the control, he can press the ESC key or click the "terminate control" button to retrieve the control of the computer
2. The application of "remote desktop" in Windows XP is very simple to realize, but it can only be carried out by the cooperation of the master and the controller. Therefore, another remote control mode - "remote desktop" is provided in the professional edition of Windows XP, You can control the computer remotely through the network far away from the office. Even if the host computer is unattended, "remote desktop" can still work smoothly. Remote users can use the data, applications and network resources in the computer in this way, and it can also let your colleagues access the desktop of your computer, To facilitate collaborative work
(1) configure the remote desktop host
the host of the remote desktop must be a computer with Windows XP installed, the host must be connected to the Internet, and have a legal public IP address. The Internet connection mode of the host can be ordinary dial-up mode, because "remote desktop" only transmits a small amount of data (such as display data and keyboard data) to implement remote control
to start the remote desktop function of Windows XP, you must log in to the system as an administrator or a member of the administrators group, so that you can have the permission to start the "remote desktop" of Windows XP
right click the "my computer" icon and select the "properties" command. In the dialog box that appears, click the Remote tab, and click to select the allow users to connect to this computer remotely option box. Click the select remote user button, and then click the Add button in the remote desktop user dialog box to open the select user dialog box As shown in Figure 3)
click the "location" button to specify the search location, and click the "object type" button to specify the type of object to search. Next, in the "input object name to select" box, type the name of the object to search, and click the "check name" button. After the user name is found, click the "OK" button to return to the "remote desktop user" dialog box. The found user will appear in the user list in the dialog box
if there are no available users, you can use the "user account" in the "control panel" to create. All users listed in the "remote desktop users" list can use remote desktop to connect to this computer. If they are members of the management group, they have the right to connect even if they are not listed here
(2) installation of client software
users of Windows XP can connect to the remote desktop through the system's own "Remote Desktop Connection" program (in "start → all programs → accessories → communication" (as shown in Figure 1). If the operating system is Windows 9x / 2000, the client software of "Remote Desktop Connection" in Windows XP installation CD can be installed
insert the Windows XP installation CD-ROM into the client's CD-ROM drive, click the "perform other tasks" option in the "welcome" page, and then select the "set up remote desktop connection" option in the page that appears, and then install according to the prompts
(3) access remote desktop
run the remote desktop connection program on the client computer, and the remote desktop connection dialog box will be displayed. Click the options button to expand all options of the dialog box, as shown in Figure 2. In the General tab, type the IP address or domain name, user name and password of the remote host, and then click the connect button, After the connection is successful, the "remote desktop" window will be opened. You can see the desktop settings, files and programs on the remote computer, and the computer will remain locked. If there is no password, no one can use it, and you can't see what you do with it
to log off and end the remote desktop, click start in the remote desktop connection window, and then log off according to the normal user log off mode
(4) remote desktop web connection
remote desktop also provides a web connection function, referred to as "remote desktop web connection", so that the client does not need to install special client software, but also can use the "remote desktop" function, which has lower requirements on the client and more flexible use, Almost any computer that can run IE browser can use the "remote desktop" function
first, let's take a look at the configuration of the server
remote desktop web connection is an optional WWW service component in Internet information services (IIS). Therefore, to enable Windows XP host to provide the function of remote desktop web connection, you must first install this component. The method is: run "add or remove programs" item in "control panel", then click "add / remove windows components" option in "add or remove programs" dialog box, select "Internet information service" option in "windows components Wizard" dialog box, click "details" button, and select "world wide web services → remote desktop web connection" item in turn, After confirmation, return to the windows component Wizard dialog box and click next to start the installation
next, run the "Internet information services" program in the "management tools", expand the folder hierarchy in turn, find the "tsweb" folder, right-click, and select the "properties" command
in the "properties" dialog box, click the "directory security" tab, click the "Edit" button in the "anonymous access and authentication control" column, and select the "anonymous access" option in the "authentication method" dialog box. So we can use IE to access remote desktop
Run IE browser on the client, and type the server address in the format of "http: / / server address (domain name) / tsweb" in the address bar. If the server address is 218.76.219.5, you can enter it in the address bar“ http://218.76.219.5/tsweb/ ”After entering, the remote desktop web connection page will appear in the IE window, as shown in Figure 3, Type the name of the remote computer you want to connect to in the "server" column of the web page, and click the "connect" button to connect to the remote desktop
in addition to remote desktop and remote assistance, Windows XP also provides program sharing function. In a sense, it is also a remote control of programs. In addition, NetMeeting also has program sharing function
the above remote control methods can only be implemented in Windows XP or Windows Server 2003, and the function is relatively simple. In order to carry out remote control in other operating systems, or need remote control to provide more powerful functions, we need to use other third-party remote control software
implementation of Windows 2000 remote control
nowadays, many enterprises or schools use Windows 2000 as a common operating system. But in the use of Windows 2000, because users are not familiar with Windows 2000 operating system, often appear incorrect operation, bring a lot of problems to the system itself. In the past, network administrators used face-to-face guidance and some remote control software to help solve the above problems. In fact, we can solve these problems by using the remote assistance of Windows 2000 server terminal services. Through the remote assistance function of terminal services, network administrators can share desktop with users to guide users how to apply
1. Implementation of terminal service
terminal service is a built-in function of Windows 2000, which has two modes of remote management and application server. This paper introces the remote assistance function based on application server mode. In the application server mode, network administrators can deploy and manage applications from the central computer room, thus saving the time and manpower required for maintenance and upgrading
Terminal Services can be installed by selecting "terminal services" in "control panel / add / Remove Programs". After installing terminal services, the computer needs to restart. It should be noted that the installation of terminal service not only realizes the service on the computer, but also installs a set of client software, which is located in C: &# 92&# 92; WinNT\&# 92; System32\&# 92; Under the clients directory, when the user computer needs assistance, it can connect to the terminal server through the installed client software, and the network administrator can implement remote assistance< There are two ways to realize the client. The first method is to install through the network shared directory, which is relatively easy; The second method is to use the floppy disk to install the client computer. While installing the terminal service, the server also provides the client software generation tool, which can generate the client installation floppy disk. Compared with the former method, this method is more cumbersome
the installation of the client is very simple. Just find the shared directory or the first floppy disk, run setup.exe and follow the wizard's instructions
3. Realize remote assistance
to realize remote assistance, the network administrator and the assisted should use the client software to connect to the terminal server at the same time. The network administrator can find the session representing the assisted by using the terminal server management tool on the terminal server. The network administrator can right-click the session label of the assisted, Select "remote control" in the pop-up menu. The client can be informed to be ready by "send message" before control is implemented. In order to ensure the operability of the assistance, the system will ask how to quickly implement the remote control
"remote assistance" is a simple remote control method provided by Windows XP system. The initiator of remote assistance sends a request for assistance to the contact person in messenger through MSN Messenger. After obtaining the consent of the other party, the remote assistance can be carried out. In the remote assistance, the computer of the assisted party will be temporarily controlled by the assisted Party (known as the expert in the remote assistance program). The expert can carry out system maintenance, install software, etc. in the controlled computer Deal with some problems in the computer, or demonstrate some operations to the assisted person
if you have already installed MSN Messenger 6.1, you need to install Windows Messenger 4.7 for remote assistance
when using remote assistance, you can click the menu command "operation → seek remote assistance" in the main dialog box of MSN Messenger (as shown in Figure 2). Then select the contact you want to invite in the seek remote assistance dialog box that appears. When the invitation is accepted, the remote assistance program dialog box opens. The invitee can manipulate the invitee's computer by clicking the "take over control" button in the "remote assistance" dialog box
the master and controller can also type messages, talk and send files in the "remote assistance" dialog box, just like in MSN Messenger. If the accused wants to terminate the control, he can press the ESC key or click the "terminate control" button to retrieve the control of the computer
2. The application of "remote desktop" in Windows XP is very simple to realize, but it can only be carried out by the cooperation of the master and the controller. Therefore, another remote control mode - "remote desktop" is provided in the professional edition of Windows XP, You can control the computer remotely through the network far away from the office. Even if the host computer is unattended, "remote desktop" can still work smoothly. Remote users can use the data, applications and network resources in the computer in this way, and it can also let your colleagues access the desktop of your computer, To facilitate collaborative work
(1) configure the remote desktop host
the host of the remote desktop must be a computer with Windows XP installed, the host must be connected to the Internet, and have a legal public IP address. The Internet connection mode of the host can be ordinary dial-up mode, because "remote desktop" only transmits a small amount of data (such as display data and keyboard data) to implement remote control
to start the remote desktop function of Windows XP, you must log in to the system as an administrator or a member of the administrators group, so that you can have the permission to start the "remote desktop" of Windows XP
right click the "my computer" icon and select the "properties" command. In the dialog box that appears, click the Remote tab, and click to select the allow users to connect to this computer remotely option box. Click the select remote user button, and then click the Add button in the remote desktop user dialog box to open the select user dialog box As shown in Figure 3)
click the "location" button to specify the search location, and click the "object type" button to specify the type of object to search. Next, in the "input object name to select" box, type the name of the object to search, and click the "check name" button. After the user name is found, click the "OK" button to return to the "remote desktop user" dialog box. The found user will appear in the user list in the dialog box
if there are no available users, you can use the "user account" in the "control panel" to create. All users listed in the "remote desktop users" list can use remote desktop to connect to this computer. If they are members of the management group, they have the right to connect even if they are not listed here
(2) installation of client software
users of Windows XP can connect to the remote desktop through the system's own "Remote Desktop Connection" program (in "start → all programs → accessories → communication" (as shown in Figure 1). If the operating system is Windows 9x / 2000, the client software of "Remote Desktop Connection" in Windows XP installation CD can be installed
insert the Windows XP installation CD-ROM into the client's CD-ROM drive, click the "perform other tasks" option in the "welcome" page, and then select the "set up remote desktop connection" option in the page that appears, and then install according to the prompts
(3) access remote desktop
run the remote desktop connection program on the client computer, and the remote desktop connection dialog box will be displayed. Click the options button to expand all options of the dialog box, as shown in Figure 2. In the General tab, type the IP address or domain name, user name and password of the remote host, and then click the connect button, After the connection is successful, the "remote desktop" window will be opened. You can see the desktop settings, files and programs on the remote computer, and the computer will remain locked. If there is no password, no one can use it, and you can't see what you do with it
to log off and end the remote desktop, click start in the remote desktop connection window, and then log off according to the normal user log off mode
(4) remote desktop web connection
remote desktop also provides a web connection function, referred to as "remote desktop web connection", so that the client does not need to install special client software, but also can use the "remote desktop" function, which has lower requirements on the client and more flexible use, Almost any computer that can run IE browser can use the "remote desktop" function
first, let's take a look at the configuration of the server
remote desktop web connection is an optional WWW service component in Internet information services (IIS). Therefore, to enable Windows XP host to provide the function of remote desktop web connection, you must first install this component. The method is: run "add or remove programs" item in "control panel", then click "add / remove windows components" option in "add or remove programs" dialog box, select "Internet information service" option in "windows components Wizard" dialog box, click "details" button, and select "world wide web services → remote desktop web connection" item in turn, After confirmation, return to the windows component Wizard dialog box and click next to start the installation
next, run the "Internet information services" program in the "management tools", expand the folder hierarchy in turn, find the "tsweb" folder, right-click, and select the "properties" command
in the "properties" dialog box, click the "directory security" tab, click the "Edit" button in the "anonymous access and authentication control" column, and select the "anonymous access" option in the "authentication method" dialog box. So we can use IE to access remote desktop
Run IE browser on the client, and type the server address in the format of "http: / / server address (domain name) / tsweb" in the address bar. If the server address is 218.76.219.5, you can enter it in the address bar“ http://218.76.219.5/tsweb/ ”After entering, the remote desktop web connection page will appear in the IE window, as shown in Figure 3, Type the name of the remote computer you want to connect to in the "server" column of the web page, and click the "connect" button to connect to the remote desktop
in addition to remote desktop and remote assistance, Windows XP also provides program sharing function. In a sense, it is also a remote control of programs. In addition, NetMeeting also has program sharing function
the above remote control methods can only be implemented in Windows XP or Windows Server 2003, and the function is relatively simple. In order to carry out remote control in other operating systems, or need remote control to provide more powerful functions, we need to use other third-party remote control software
implementation of Windows 2000 remote control
nowadays, many enterprises or schools use Windows 2000 as a common operating system. But in the use of Windows 2000, because users are not familiar with Windows 2000 operating system, often appear incorrect operation, bring a lot of problems to the system itself. In the past, network administrators used face-to-face guidance and some remote control software to help solve the above problems. In fact, we can solve these problems by using the remote assistance of Windows 2000 server terminal services. Through the remote assistance function of terminal services, network administrators can share desktop with users to guide users how to apply
1. Implementation of terminal service
terminal service is a built-in function of Windows 2000, which has two modes of remote management and application server. This paper introces the remote assistance function based on application server mode. In the application server mode, network administrators can deploy and manage applications from the central computer room, thus saving the time and manpower required for maintenance and upgrading
Terminal Services can be installed by selecting "terminal services" in "control panel / add / Remove Programs". After installing terminal services, the computer needs to restart. It should be noted that the installation of terminal service not only realizes the service on the computer, but also installs a set of client software, which is located in C: &# 92&# 92; WinNT\&# 92; System32\&# 92; Under the clients directory, when the user computer needs assistance, it can connect to the terminal server through the installed client software, and the network administrator can implement remote assistance< There are two ways to realize the client. The first method is to install through the network shared directory, which is relatively easy; The second method is to use the floppy disk to install the client computer. While installing the terminal service, the server also provides the client software generation tool, which can generate the client installation floppy disk. Compared with the former method, this method is more cumbersome
the installation of the client is very simple. Just find the shared directory or the first floppy disk, run setup.exe and follow the wizard's instructions
3. Realize remote assistance
to realize remote assistance, the network administrator and the assisted should use the client software to connect to the terminal server at the same time. The network administrator can find the session representing the assisted by using the terminal server management tool on the terminal server. The network administrator can right-click the session label of the assisted, Select "remote control" in the pop-up menu. The client can be informed to be ready by "send message" before control is implemented. In order to ensure the operability of the assistance, the system will ask how to quickly implement the remote control
9. Remote control is when your mobile phone is stolen, so that your personal private information will not be leaked. Generally, as long as you set the verification code, you can send command SMS to your mobile phone through other people's mobile phone to realize the functions of shutting down immediately, encrypting files, destroying information and so on. Generally, it will be used together with anti-theft tracking
Hot content