Little flying elephant LEGO mining simulator Download
Publish: 2021-04-22 06:41:05
1. The cone crusher can be used for secondary crushing or tertiary crushing in sand proction.
the specific working principle is as follows:
the crushing effect of the medium crushing cone crusher is basically the same as that of the circular crusher. The working face between movable cone and fixed cone is also used for ore crushing. The moving cone is supported on a spherical bearing and fixed on a suspended vertical shaft. The vertical shaft is placed in an eccentric sleeve, and the eccentric sleeve is placed on the thrust bearing
the moving cone and the vertical shaft are driven by the eccentric shaft sleeve, which is driven by the horizontal shaft and the belt pulley through the bevel gear. The pulley is driven by motor through V-belt. The lower part of the vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, a conical surface is drawn out with the shaft. Therefore, when the moving cone is close to the stationary cone, the ore is crushed. The casing is composed of upper and lower parts, which are connected by bolts. The bolt is sheathed with a strong spring. The function of the spring is not to damage the crusher (such as the main shaft) when the metal or other hard objects fall into the crushing chamber. If a metal block or other hard objects (nuts, drill heads, etc.) enter the crushing chamber together with the ore, the stationary cone will be lifted and the ore outlet will be enlarged to discharge it. Sometimes the cone crusher uses the oil pressure (or water pressure) device to adjust the size of the ore outlet
the ore falls into the machine through the distribution plate through the feeding port, and the distribution plate is installed on the upper end of the vertical axis. Due to the rotation of the vertical axis, the vibration is obtained, and the ore is evenly distributed around the cone. With the help of the hinge rod and hinge with handle, the fixed cone can be raised or lowered to adjust the width of the ore outlet. All parts are made of cast steel. The working faces of moving cone and fixed cone are inlaid with manganese steel lining plate to protect the cone from wear. The lining plate can be replaced after wear. During replacement, molten lead is poured between the lining plate and the cone surface to make them closely bonded
fine crushing cone crusher is also called short head cone crusher, or "round grinding". Its structure is basically the same as that of the medium crushing cone crusher, and its only difference is that the shape of the moving cone is different from that of the fixed cone. The moving cone and fixed cone of short head cone crusher are relatively short, and the parallel belt between the two cones is relatively long, and the feeding mouth and discharge mouth are relatively small, so the finer proct (5-10 mm) can be obtained
in addition to the standard and short head cone crushers, there is also a medium cone crusher between them, which can be used for both medium and fine crushing. The main difference among standard, medium and short head cone crushers is the different section shape of crushing chamber. Therefore, the particle size of ore feeding and ore discharging are also different
the rotary crusher is used for coarse crushing, the standard cone crusher for medium crushing and the short head cone crusher for fine crushing. The specifications of medium and fine cone crushers are expressed by the bottom diameter D of the moving cone.
the specific working principle is as follows:
the crushing effect of the medium crushing cone crusher is basically the same as that of the circular crusher. The working face between movable cone and fixed cone is also used for ore crushing. The moving cone is supported on a spherical bearing and fixed on a suspended vertical shaft. The vertical shaft is placed in an eccentric sleeve, and the eccentric sleeve is placed on the thrust bearing
the moving cone and the vertical shaft are driven by the eccentric shaft sleeve, which is driven by the horizontal shaft and the belt pulley through the bevel gear. The pulley is driven by motor through V-belt. The lower part of the vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, a conical surface is drawn out with the shaft. Therefore, when the moving cone is close to the stationary cone, the ore is crushed. The casing is composed of upper and lower parts, which are connected by bolts. The bolt is sheathed with a strong spring. The function of the spring is not to damage the crusher (such as the main shaft) when the metal or other hard objects fall into the crushing chamber. If a metal block or other hard objects (nuts, drill heads, etc.) enter the crushing chamber together with the ore, the stationary cone will be lifted and the ore outlet will be enlarged to discharge it. Sometimes the cone crusher uses the oil pressure (or water pressure) device to adjust the size of the ore outlet
the ore falls into the machine through the distribution plate through the feeding port, and the distribution plate is installed on the upper end of the vertical axis. Due to the rotation of the vertical axis, the vibration is obtained, and the ore is evenly distributed around the cone. With the help of the hinge rod and hinge with handle, the fixed cone can be raised or lowered to adjust the width of the ore outlet. All parts are made of cast steel. The working faces of moving cone and fixed cone are inlaid with manganese steel lining plate to protect the cone from wear. The lining plate can be replaced after wear. During replacement, molten lead is poured between the lining plate and the cone surface to make them closely bonded
fine crushing cone crusher is also called short head cone crusher, or "round grinding". Its structure is basically the same as that of the medium crushing cone crusher, and its only difference is that the shape of the moving cone is different from that of the fixed cone. The moving cone and fixed cone of short head cone crusher are relatively short, and the parallel belt between the two cones is relatively long, and the feeding mouth and discharge mouth are relatively small, so the finer proct (5-10 mm) can be obtained
in addition to the standard and short head cone crushers, there is also a medium cone crusher between them, which can be used for both medium and fine crushing. The main difference among standard, medium and short head cone crushers is the different section shape of crushing chamber. Therefore, the particle size of ore feeding and ore discharging are also different
the rotary crusher is used for coarse crushing, the standard cone crusher for medium crushing and the short head cone crusher for fine crushing. The specifications of medium and fine cone crushers are expressed by the bottom diameter D of the moving cone.
2. I haven't heard of this kind of saying, but it can be used to pay abroad, and it's not supported at home
I have many BTCs in bitoffer myself
I have many BTCs in bitoffer myself
3. http://z..com/question/84164731.html?si=8
4. What simulator does the owner need? If it is a handheld simulator, you can go to the vagrant sky, video game bus.. Nintendo's handset, you can go to Nintendo related forum or post bar to find resources, other I am not very clear. Generally speaking, simulators can be found on mainstream game websites
5. Many simulators can play gal games, ah, a lot of search. But most games need halo assistant, otherwise you can't find a place to play.
6. Unknown_Error
7. Download the emulator you need from the Internet
if it is an Android simulator, it is recommended to use the small leather assistant simulator ~ ~ ~ faster and more convenient
if it is an Android simulator, it is recommended to use the small leather assistant simulator ~ ~ ~ faster and more convenient
8. Copy the compressed package directly to the ROMs folder of the simulator installation folder without decompression.
for example, the path of your computer is D: &# 92; Emulator & 92; roms\ Alloy warhead 5.rar
for example, the path of your computer is D: &# 92; Emulator & 92; roms\ Alloy warhead 5.rar
9. This can be directly searched on the Internet. For example, if you want to get off the GBA simulator, you can search this
if you want to get off the PS simulator, similarly, the simulator can play on the computer
GBA simulator http://www.tgbus.com/gba/emu/gbaemu.htm
PS simulator http://www.skycn.com/soft/5939.html
if you want to get off the PS simulator, similarly, the simulator can play on the computer
GBA simulator http://www.tgbus.com/gba/emu/gbaemu.htm
PS simulator http://www.skycn.com/soft/5939.html
10. I'm Apple computer, using the night God Mac version.
Hot content