BTD mining and reloading system is gone

1. After the system is reinstalled, the reasons and solutions for the lack of the items on disk D are as follows:
(1) generally, the computer does not display the items in the partition of the hard disk. This is because the partition table of the hard disk is wrong, which makes it impossible to identify the partition normally. Generally, in case of such a phenomenon, as long as the partition table is rebuilt, it can be recovered, The method is as follows:
(2) processing method: first, prepare a latest installation CD of ghost version with PE, whether XP or win7, (generally software stores or computer stores have bought a ￥ 5-8 one) or prepare a U disk with PE, then turn on the computer, press F12 or del to enter the BIOS, set the first boot item as CD-ROM (or U disk), Put in the CD (or insert U disk), enter the CD (or U disk), enter winpe, find a software called diskgenius, open this software, find your own "hard disk", select the hard disk, right-click, a drop-down box will pop up, find the "search for lost partition (rebuild partition table)" in the right-click menu, Then a dialog box will pop up: "the whole hard disk" and click "start search". At this time, it will automatically search. After the partition is found, click "keep". In this way, all the partitions can be found. On the main interface of diskgenius, you can also see all the partitions. This means that the partition table has been rebuilt successfully. Finally, click "save partition table" in the right-click menu, and a dialog box will pop up, "Are you sure you want to save?", Click "yes" and finally exit the software diskgenius. This means that your partition table has returned to normal. Then restart the computer and you can see the contents of the partition.

2. If your premise is that you have not done a backup, then the data of disk
C is gone, including desktop files, my documents, etc
ie saved favorite pages, all drivers
as long as it is stored in Disk C, there is no more information about the registry used by other disks

3. If there is no wrong partition selected for the reload, you only need to assign a drive letter to disk D and then open it. The assigned drive letter will not affect the original contents of the disk.

4. If the hardware driver CD is still there, it is the simplest. The CD will run automatically in the CD-ROM drive. After installing all the hardware drivers, it can be used normally
the driver can be downloaded from the official website of the hardware, and the online driver installation tools, such as driver life, or the master can automatically upgrade and install the driver.

5. Estimated to be formatted, need to restore data, you can refer to the relevant information here, if you also need remote assistance, see the information contact me

6. Re partition, use your startup disk, press F10 at the beginning, CD / DVD drive, there is a partition program in DOS
and see what others say.

7.

Reasons for the disappearance of D disk data:

in the process of re installing the system, the partition table of the hard disk made an error, which led to the failure to recognize the partition normally

Data recovery method of disk D:

1. Download easyrecovery software from the Internet, install it to partition C, open the software, and click "format disk by mistake"

8. What's the original? What kind of solid-state hard disk can't be re installed? Solid state hard disk is a computer hard disk. Maybe it's gone. You say it's a system backup. If you don't have it, you can just re install it, http://www.szchehang.com/windows7/12333.html
do you mean to reload the system?
it's very simple. First of all, you have to have a USB flash disk of at least 4G and a blank disk, Because when the image is written, it will format
and then download the software
UltraISO
PE
and plug in the U disk
run UltraISO
- file --- open the ISO image file of win7
Click
start --- write the hard disk image; Note: remember to select your USB drive (to ensure that the recording is correct, it is recommended to check
recording effectiveness
)
Click
easy start
write usb-hdd +
after the writing is completed, the proction is completed
USB drive does not need to be pulled out, restart the computer, BIOS set USB drive to start, OK, ready to install

9. How can this happen? If you don't have a partition for the internal system, it's OK. You can't if you've divided. Now download a software of easyrecovery, install it on Disk C, and run it. Find the data in disk D, e, f ~ ~ ~, and see if you can find it back. You can't think about the data in Disk C, because if you read and write it again, the original data will be covered~~~~~

10. [problem description]: