My world: mining exploration 22
Publish: 2021-04-25 16:19:10
1. Preparation for detailed explanation of mining techniques:
1
2. Choose an open space for two houses, one for headquarters and the other for mining Connect the two houses together.)
3. Dig stones for pickaxes and stoves
4. Build stone axes (as weapons) to build at least half a set of torches No coal can be used for charcoal)
5. Prepare more food and boxes, tool tables and stoves
6. Prepare enough ladders, of course, you can also dig 2x2 stairs (be careful of dizziness when climbing)
7. Open peace mode, if you think you should bring anything else, please prepare yourself. By the way, players who are afraid of the dark and are afraid of being alone in a confined space can turn on another music< 1. Mine type
1. Dig down alternately, never dig your own feet
2. When digging a cave, surround your own vertical mine in the cave. Interested players can explore in the cave (please refer to the cave mining method below)
3. When the lava is excavated, fill it with sand
4. When you see a pebble that you didn't put yourself in, dig out the cage of the monster inside; When you see the stone bricks, please thicken the wall of the mine to avoid being blown up by Guli< When you get to the bedrock, four squares up is the best way to dig diamonds, and two squares up is the best way to dig iron.
6. When you get to the number of floors you want, dig a large space as a transfer station, and then dig a mine road one grid wide and three or four grids high. Please design the distribution of the mine road
7. After the ore is excavated, it should be put into the box of the transfer station as soon as possible and brought back to the ground
8. When you dig a cave, please plug it. When there is magma flowing out, quickly retreat, and then plug it with something that can't be burned. Be careful to burn your hands
9. The first step is to build pickaxes after mining
10. Don't rush into the cave.
1
2. Choose an open space for two houses, one for headquarters and the other for mining Connect the two houses together.)
3. Dig stones for pickaxes and stoves
4. Build stone axes (as weapons) to build at least half a set of torches No coal can be used for charcoal)
5. Prepare more food and boxes, tool tables and stoves
6. Prepare enough ladders, of course, you can also dig 2x2 stairs (be careful of dizziness when climbing)
7. Open peace mode, if you think you should bring anything else, please prepare yourself. By the way, players who are afraid of the dark and are afraid of being alone in a confined space can turn on another music< 1. Mine type
1. Dig down alternately, never dig your own feet
2. When digging a cave, surround your own vertical mine in the cave. Interested players can explore in the cave (please refer to the cave mining method below)
3. When the lava is excavated, fill it with sand
4. When you see a pebble that you didn't put yourself in, dig out the cage of the monster inside; When you see the stone bricks, please thicken the wall of the mine to avoid being blown up by Guli< When you get to the bedrock, four squares up is the best way to dig diamonds, and two squares up is the best way to dig iron.
6. When you get to the number of floors you want, dig a large space as a transfer station, and then dig a mine road one grid wide and three or four grids high. Please design the distribution of the mine road
7. After the ore is excavated, it should be put into the box of the transfer station as soon as possible and brought back to the ground
8. When you dig a cave, please plug it. When there is magma flowing out, quickly retreat, and then plug it with something that can't be burned. Be careful to burn your hands
9. The first step is to build pickaxes after mining
10. Don't rush into the cave.
2. 1. It's OK to use soldiers and tanks, as long as you have more than him
2. Use Yuri or mind commandos to collect one and then hit the other's base
3. There is a technical conflict between this problem and the fifth one. The best defense is to attack when the experts are not in a hurry to develop quickly. Use soldiers or dogs in the early stage to harass the other party as soon as possible, making it difficult for the other party to develop. Then you can develop slowly on your own side. If you insist on rapid development, the key still depends on your proficiency: the shortcut keys and the best construction sequence are all trained at ordinary times
4. The center doesn't need to be operated by you. As long as you build it, every soldier you build will be copied by the center, but the price remains the same
5
Yuri's revenge is an official improved version, just like the current red police 3 Uprising, it is an improvement on red police 3. Yuri revenges that Yuri has one more Yuri camp than red police 2. The plot explains that Yuri has betrayed one of the camps of the organization. Its many arms, the novel straight let a person call cool! But in the Soviet Camp, there was no Yuri. After my research, I was disappointed to find that Yuri couldn't create the original super special forces in red police 2, Yuri Gai. What a pity!
2. Use Yuri or mind commandos to collect one and then hit the other's base
3. There is a technical conflict between this problem and the fifth one. The best defense is to attack when the experts are not in a hurry to develop quickly. Use soldiers or dogs in the early stage to harass the other party as soon as possible, making it difficult for the other party to develop. Then you can develop slowly on your own side. If you insist on rapid development, the key still depends on your proficiency: the shortcut keys and the best construction sequence are all trained at ordinary times
4. The center doesn't need to be operated by you. As long as you build it, every soldier you build will be copied by the center, but the price remains the same
5
Yuri's revenge is an official improved version, just like the current red police 3 Uprising, it is an improvement on red police 3. Yuri revenges that Yuri has one more Yuri camp than red police 2. The plot explains that Yuri has betrayed one of the camps of the organization. Its many arms, the novel straight let a person call cool! But in the Soviet Camp, there was no Yuri. After my research, I was disappointed to find that Yuri couldn't create the original super special forces in red police 2, Yuri Gai. What a pity!
3.
I know that sometimes we have to let ourselves do something we don't want to do. And sometimes we have to do something we don't want to do, because sometimes we have to seek some benefits for our own life, but to let us have a better life, so that we can better support our families. And only in this way can we help our families to have a more happy life. Moreover, we should also make ourselves obtain more income through continuous efforts, so that our family can live a better life, and our parents and children can have a more stable life. Only in this way can we achieve our goals, and only in this way can we achieve our values. A lot of people are going to do something to dig the mine, because in this way, they will have a better income, and they can make money faster. It's really easy to make money by digging a mine, but it's still very dangerous, and it's also easy to cause injuries. Collapse of a gold mine in okanca Peninsula! Why do accidents always happen in mines? I think there are three main reasons:
the first reason is that the terrain of the mine is not very stable in fact, we all know that the mine is a dangerous object, and it may also pose a big threat to the people who dig there, because the terrain of the mine is very unstable, and it is easy to collapse, and sometimes it may collapse unexpectedly, Because most of the time, we can't predict, and can't let ourselves have a better personal safety maintenance{ RRRRR}
in a word, the reason why there are always accidents of mine collapse is that the mine is not very stable
4. The portal Knight
recommends buying the genuine version on steam
there are also pirated online on Ranger
recommends buying the genuine version on steam
there are also pirated online on Ranger
5. Minecraft's mines are usually built in dense forests or on plains, where it is possible to find mines. Of course, you can dig underground to make a man-made mine. The highest diamond proction rate is 11 layers
6. Don't listen to Du. Don't you know that witch is not like that. Do you have a mole
7. Bedrock. It can't be g in survival mode. Its only function is to tell you that it's underground and prevent you from falling into the void to die.
8. Depending on the computer motherboard you buy, some computer motherboards have two CPU sockets (slots), which can connect two CPUs. Motherboard generally has only one CPU slot
generally, the server only has one CPU, and multiple CPU seats are only used for future expansion. However, I know that the server can have up to eight CPUs, no matter how high it is.
generally, the server only has one CPU, and multiple CPU seats are only used for future expansion. However, I know that the server can have up to eight CPUs, no matter how high it is.
9. Yes, the principle of al system is to install different systems in different disk partitions
al system is to install two operating systems on the computer. When the al system is installed, the two systems are installed in different partitions, and the latter system will not cover the former system. And each indivial system has its own partition format, which will not cause conflicts. After the al system is installed, there is a multi boot menu to select which operating system to enter when starting. In the current state, only one system is running and can't switch at will. If you want to enter another one, you need to restart and select again< I believe that many users who buy new computers are pre installed with win7 operating system, but they also need to use WinXP system. Therefore, we need to install WinXP in win7
(1) method 1: use the WinXP installation CD to completely install
first, you need to prepare a primary partition for installing WinXP system. It is suggested that in win7 system, use Disk Manager to create a main partition with a capacity of not less than 10GB, and then use WinXP installation CD to start the computer and install it. The installation method is similar to installing WinXP system
problems needing attention:
1. Because win7 has occupied two partitions (100MB hidden system reserved partition and system partition) by default, when selecting the installation location, please select the partition according to the actual situation
2. Because the partition is created in win7, WINXP setup cannot recognize it, so you need to format it again in the next step
after the installation, you can only enter WinXP system. At this time, you need further manual configuration to restore the Startup menu
start the computer with the win7 installation CD. When you go to the "install now" step, select "repair computer" until the "system recovery options" menu appears
select "command prompt", and then input the following commands in turn in the pop-up command prompt window (press enter once for each input, if the information of "operation completed successfully" is returned on the screen, continue to input the next command, otherwise please check whether the input is wrong and re-enter):
Bcdedit / create {NTLDR} - D & quot; Windows WinXP"
Bcdedit / set {NTLDR} device partition = D:
Bcdedit / set {NTLDR} path NTLDR
Bcdedit / displayOrder {NTLDR} / addlast
restart the computer after all the commands are run, and the Startup menu will appear (Note: "D:" is the partition of WinXP, please modify according to the actual situation)
(2) method 2: install with ghost image
I believe that many users have the habit of making ghost image CD for backup and system installation. It's easier to install with the ghost image file of WinXP than with the installation CD of WinXP. Just configure the Startup menu after the WinXP system is restored
as in the above method, first prepare a primary partition for WinXP recovery under win7. Then use the corresponding tool CD to start the computer, and restore the ghost image file of WinXP to the prepared main partition
after completion, there is no start menu, so you can only start under win7. Never mind. After entering win7 as a system administrator, "NTLDR", "boot. Ini" and "ntdetect. Com" in WinXP partition (all in the root directory of WinXP system) to win7 partition. Then run the command prompt and enter the above four commands
summary: the deepest feeling of installing WinXP in win7 is "perverse", and the difficulty of installation is relatively high. Therefore, it is recommended that ordinary users install WinXP under the guidance of users with a certain computer foundation. In addition, this paper can not list all the possible situations, but for some occasional inexplicable errors (such as win7 can not start, etc.), we can generally use the win7 installation CD to repair them< Second, install win7 under WinXP
I believe many users have the same loyalty to WinXP as the author, but the new functions of win7 are also attractive. Therefore, installing win7 in WinXP naturally becomes a choice for many people. Relatively speaking, installing win7 in WinXP is the easiest< As we all know, the installation of the operating system from the low version to the high version is generally very smooth, there is no problem. Therefore, the installation of win7 in WinXP system is also very smooth
problems needing attention:
1. In the installation selection aspect, please choose "custom installation" instead of "upgrade installation". WinXP cannot be upgraded to win7 because they are different kernels
2. When selecting the installation location, do not select the partition with WinXP installed, otherwise you will not be able to create a al system
3. The installation wizard will ask if you want to get important updates. Please select "no", because updates can be centralized after installation
4. The partition space for installing win7 should not be less than 20GB and must be in NTFS format. Therefore, it is recommended to reserve the installation space in advance in WinXP< (2) method 2: start the installation with win7 installation CD
it is easy to install win7 in WinXP system, but the drawback is that the partition cannot be adjusted. However, the partition can be adjusted arbitrarily, including creating, deleting, formatting and adjusting the size of the partition
the problems to be noticed are similar to the former method
summary: there are two methods that users can choose according to their own situation, and the basic operation is very simple, as long as they follow the corresponding prompts. The Startup menu can also be generated automatically
Third, the best solution - independent al system installation
the above is a more traditional al system installation solution, because it mainly relies on the Startup menu for guidance, so it has high limitations. Once the Startup menu configuration file is damaged, both systems will be paralyzed. The corresponding independent al system without start-up menu overcomes this disadvantage. More importantly, independent multiple systems can maintain each other
since there is no Startup menu, you can choose to enter different systems by using the system conversion tool extracted from the partition magician of Windows version
first, use a third-party tool (such as "partition magician") to create two main partitions (WinXP and win7) on the hard disk, and set one of them to the active state. When a primary partition is activated, another primary partition is automatically hidden, which is exactly what we need. In this example, we first activate the partition where win7 is installed
prompt: once win7 is installed in the system, the partition magician of DOS version will not be able to recognize the hard disk normally. Therefore, please create two main partitions in advance
then, use the win7 installation CD to start the computer and install win7 into the predetermined partition. After the installation, start the system, and run "pqbw. Exe" in the conversion tool. In the pop-up dialog box (as shown in Figure 4), select the partition of WinXP, then select "restart now", and click "OK" to restart the computer. At this time, the partition used to install WinXP will be activated, while the partition used to install win7 will be automatically hidden. Next, use the WinXP installation CD to guide the computer to install WinXP. After that, WINXP will start automatically
tip: in this step, you can also use the ghost image file to install WinXP
at this point, no matter which system is started, just run "pqbw. Exe", select the partition of another system and restart to switch to another system. At the same time, no matter in which system, you can use tool software to backup or restore another system. If it's really bad luck, the two systems can't be started, and can be repaired by winpe and other tools
the easiest way is to install win7 under WinXP, which is not too difficult for ordinary users; Installing WinXP under win7 is relatively difficult and easy to cause many problems, so it is not recommended for ordinary users to install WinXP independently; The installation of independent multi system is relatively difficult, but it has obvious advantages, which is more suitable for computer technology lovers to try
therefore, for those users who have already installed win7, they can consider reformatting the system after making a good system backup of win7, and then using the backup file to restore and install win7 after installing WinXP. The operation is relatively simple and safe.
al system is to install two operating systems on the computer. When the al system is installed, the two systems are installed in different partitions, and the latter system will not cover the former system. And each indivial system has its own partition format, which will not cause conflicts. After the al system is installed, there is a multi boot menu to select which operating system to enter when starting. In the current state, only one system is running and can't switch at will. If you want to enter another one, you need to restart and select again< I believe that many users who buy new computers are pre installed with win7 operating system, but they also need to use WinXP system. Therefore, we need to install WinXP in win7
(1) method 1: use the WinXP installation CD to completely install
first, you need to prepare a primary partition for installing WinXP system. It is suggested that in win7 system, use Disk Manager to create a main partition with a capacity of not less than 10GB, and then use WinXP installation CD to start the computer and install it. The installation method is similar to installing WinXP system
problems needing attention:
1. Because win7 has occupied two partitions (100MB hidden system reserved partition and system partition) by default, when selecting the installation location, please select the partition according to the actual situation
2. Because the partition is created in win7, WINXP setup cannot recognize it, so you need to format it again in the next step
after the installation, you can only enter WinXP system. At this time, you need further manual configuration to restore the Startup menu
start the computer with the win7 installation CD. When you go to the "install now" step, select "repair computer" until the "system recovery options" menu appears
select "command prompt", and then input the following commands in turn in the pop-up command prompt window (press enter once for each input, if the information of "operation completed successfully" is returned on the screen, continue to input the next command, otherwise please check whether the input is wrong and re-enter):
Bcdedit / create {NTLDR} - D & quot; Windows WinXP"
Bcdedit / set {NTLDR} device partition = D:
Bcdedit / set {NTLDR} path NTLDR
Bcdedit / displayOrder {NTLDR} / addlast
restart the computer after all the commands are run, and the Startup menu will appear (Note: "D:" is the partition of WinXP, please modify according to the actual situation)
(2) method 2: install with ghost image
I believe that many users have the habit of making ghost image CD for backup and system installation. It's easier to install with the ghost image file of WinXP than with the installation CD of WinXP. Just configure the Startup menu after the WinXP system is restored
as in the above method, first prepare a primary partition for WinXP recovery under win7. Then use the corresponding tool CD to start the computer, and restore the ghost image file of WinXP to the prepared main partition
after completion, there is no start menu, so you can only start under win7. Never mind. After entering win7 as a system administrator, "NTLDR", "boot. Ini" and "ntdetect. Com" in WinXP partition (all in the root directory of WinXP system) to win7 partition. Then run the command prompt and enter the above four commands
summary: the deepest feeling of installing WinXP in win7 is "perverse", and the difficulty of installation is relatively high. Therefore, it is recommended that ordinary users install WinXP under the guidance of users with a certain computer foundation. In addition, this paper can not list all the possible situations, but for some occasional inexplicable errors (such as win7 can not start, etc.), we can generally use the win7 installation CD to repair them< Second, install win7 under WinXP
I believe many users have the same loyalty to WinXP as the author, but the new functions of win7 are also attractive. Therefore, installing win7 in WinXP naturally becomes a choice for many people. Relatively speaking, installing win7 in WinXP is the easiest< As we all know, the installation of the operating system from the low version to the high version is generally very smooth, there is no problem. Therefore, the installation of win7 in WinXP system is also very smooth
problems needing attention:
1. In the installation selection aspect, please choose "custom installation" instead of "upgrade installation". WinXP cannot be upgraded to win7 because they are different kernels
2. When selecting the installation location, do not select the partition with WinXP installed, otherwise you will not be able to create a al system
3. The installation wizard will ask if you want to get important updates. Please select "no", because updates can be centralized after installation
4. The partition space for installing win7 should not be less than 20GB and must be in NTFS format. Therefore, it is recommended to reserve the installation space in advance in WinXP< (2) method 2: start the installation with win7 installation CD
it is easy to install win7 in WinXP system, but the drawback is that the partition cannot be adjusted. However, the partition can be adjusted arbitrarily, including creating, deleting, formatting and adjusting the size of the partition
the problems to be noticed are similar to the former method
summary: there are two methods that users can choose according to their own situation, and the basic operation is very simple, as long as they follow the corresponding prompts. The Startup menu can also be generated automatically
Third, the best solution - independent al system installation
the above is a more traditional al system installation solution, because it mainly relies on the Startup menu for guidance, so it has high limitations. Once the Startup menu configuration file is damaged, both systems will be paralyzed. The corresponding independent al system without start-up menu overcomes this disadvantage. More importantly, independent multiple systems can maintain each other
since there is no Startup menu, you can choose to enter different systems by using the system conversion tool extracted from the partition magician of Windows version
first, use a third-party tool (such as "partition magician") to create two main partitions (WinXP and win7) on the hard disk, and set one of them to the active state. When a primary partition is activated, another primary partition is automatically hidden, which is exactly what we need. In this example, we first activate the partition where win7 is installed
prompt: once win7 is installed in the system, the partition magician of DOS version will not be able to recognize the hard disk normally. Therefore, please create two main partitions in advance
then, use the win7 installation CD to start the computer and install win7 into the predetermined partition. After the installation, start the system, and run "pqbw. Exe" in the conversion tool. In the pop-up dialog box (as shown in Figure 4), select the partition of WinXP, then select "restart now", and click "OK" to restart the computer. At this time, the partition used to install WinXP will be activated, while the partition used to install win7 will be automatically hidden. Next, use the WinXP installation CD to guide the computer to install WinXP. After that, WINXP will start automatically
tip: in this step, you can also use the ghost image file to install WinXP
at this point, no matter which system is started, just run "pqbw. Exe", select the partition of another system and restart to switch to another system. At the same time, no matter in which system, you can use tool software to backup or restore another system. If it's really bad luck, the two systems can't be started, and can be repaired by winpe and other tools
the easiest way is to install win7 under WinXP, which is not too difficult for ordinary users; Installing WinXP under win7 is relatively difficult and easy to cause many problems, so it is not recommended for ordinary users to install WinXP independently; The installation of independent multi system is relatively difficult, but it has obvious advantages, which is more suitable for computer technology lovers to try
therefore, for those users who have already installed win7, they can consider reformatting the system after making a good system backup of win7, and then using the backup file to restore and install win7 after installing WinXP. The operation is relatively simple and safe.
Hot content