Xiaomi router mined
Publish: 2021-04-27 14:30:38
1. You have the subway directly to the Grand Theater at Shenzhen University. Now line 1 is only open to Shenzhen University... In the science park or Shenzhen University, take Line 1 to the Grand Theater, there is that station
Yes, there are many places in Nanshan District, such as Shenzhen University, science and Technology Park, Dachong, Baishizhou, window of the world and overseas Chinese town. Xili has not opened yet! Nanyou, Shekou is not yet
Yes, there are many places in Nanshan District, such as Shenzhen University, science and Technology Park, Dachong, Baishizhou, window of the world and overseas Chinese town. Xili has not opened yet! Nanyou, Shekou is not yet
2. It's Ben
3. Look at your network speed, I now use Xunlei mine mining, 100 MB peer-to-peer broadband, about 5 to 6 jiao a day (do not open the box), you can calculate how much other broadband can reach. There are many coastal areas. It seems that broadband is fast there.
4. If a mobile phone with mining code is connected to a router, the mining code cannot be left in the router. Generally, the router will not save data.
5. Xiaomi route is a crystal mine, with high profits in the early days. Now it is more difficult to mine, and the profits are much less. I'm paying attention to the online jCG K3 blockchain routing. JCG is an old manufacturer of intelligent routing. Compared with the old mining area, mining in the new mining area will be much easier. Moreover, it is an intelligent router equipped with blockchain technology. Besides mining, it can also be used for home use.
6. It depends on your network speed. If the network speed is fast, it's OK (50m or above is recommended). If the network speed is slow, don't think about it.
7.
Hello
sorry, Xiaomi router has not lost its recovery function
for more wonderful content, please visit the MIUI forum www.miui.com Xiaomi official website address www.mi.com
8. How is this interference caused? You are in the same LAN. It connects the route to the LAN port. What you get is the routing parameters of Xiaomi. No, you can try to enter the route and turn off the DHCP
9. When the Xiaomi router fails to start, there will be two states:
1. The router indicator is red and always on
at this time, the router has encountered serious problems, resulting in the AB + security recovery system unable to start
for the hard disk version of Xiaomi router (r1d), the mini version of Xiaomi router (r1c) and the new hard disk version of Xiaomi router (r2d), this problem needs to be solved through the USB flash drive. If the U-disk brush can not be solved, please contact the after-sales department to return to the factory
2. The router's indicator light is flashing red
at this time, the router enters the security recovery system because the AB system fails to start
for the hard disk version of Xiaomi router (r1d), the basic functions and wireless network can still work normally. You can connect to the router management background to restore the web page with one click. If the restoration fails, you need to use the U disk to restore the web page
for the MI router mini (r1c) and the new Mi router hard disk version (r2d), you need to use the USB flash drive directly to recover<
U disk brushing steps:
1. Prepare a U disk whose system format is fat or FAT32
2. Download the ROM package used for brushing from the official website of Xiaomi router, miwifi.com
the most important thing is to say it again three times: the USB flash disk will clear the data on the hard disk! Will clear the data on the hard disk!! Will clear the data on the hard disk
3. Put the downloaded ROM package in the root directory of the U disk and name it "miwifi. Bin"
4. When the indicator light is red flashing or red is always on, insert the USB flash disk directly into the USB interface of the router, press and hold reset with a slender tool, and release reset when the indicator light of the router turns to yellow flashing; When the indicator light is in other states, you need to disconnect the power supply of the router first, plug the U-disk into the USB interface of the router, press and hold reset with a slender tool, and then turn on the power. When the indicator light of the router turns yellow, release reset
5. After about 3-5 minutes, when the indicator light turns yellow, you can unplug the U-disk. At this time, the machine has finished brushing and is restarting, Wait a moment for the router indicator to turn blue and it can be used normally
if the yellow light flashes for a few seconds and then turns to the yellow light, it indicates that the U-disk brushing process has failed. Please check the above brushing process and restart the brushing operation.
1. The router indicator is red and always on
at this time, the router has encountered serious problems, resulting in the AB + security recovery system unable to start
for the hard disk version of Xiaomi router (r1d), the mini version of Xiaomi router (r1c) and the new hard disk version of Xiaomi router (r2d), this problem needs to be solved through the USB flash drive. If the U-disk brush can not be solved, please contact the after-sales department to return to the factory
2. The router's indicator light is flashing red
at this time, the router enters the security recovery system because the AB system fails to start
for the hard disk version of Xiaomi router (r1d), the basic functions and wireless network can still work normally. You can connect to the router management background to restore the web page with one click. If the restoration fails, you need to use the U disk to restore the web page
for the MI router mini (r1c) and the new Mi router hard disk version (r2d), you need to use the USB flash drive directly to recover<
U disk brushing steps:
1. Prepare a U disk whose system format is fat or FAT32
2. Download the ROM package used for brushing from the official website of Xiaomi router, miwifi.com
the most important thing is to say it again three times: the USB flash disk will clear the data on the hard disk! Will clear the data on the hard disk!! Will clear the data on the hard disk
3. Put the downloaded ROM package in the root directory of the U disk and name it "miwifi. Bin"
4. When the indicator light is red flashing or red is always on, insert the USB flash disk directly into the USB interface of the router, press and hold reset with a slender tool, and release reset when the indicator light of the router turns to yellow flashing; When the indicator light is in other states, you need to disconnect the power supply of the router first, plug the U-disk into the USB interface of the router, press and hold reset with a slender tool, and then turn on the power. When the indicator light of the router turns yellow, release reset
5. After about 3-5 minutes, when the indicator light turns yellow, you can unplug the U-disk. At this time, the machine has finished brushing and is restarting, Wait a moment for the router indicator to turn blue and it can be used normally
if the yellow light flashes for a few seconds and then turns to the yellow light, it indicates that the U-disk brushing process has failed. Please check the above brushing process and restart the brushing operation.
Hot content